Professional Documents
Culture Documents
PRE-LAB ASSIGNMENT
The initial pressure and temperature is recoded before switching on the heat pump.
The power and temperatures reading is recorded on both vaporizer and condenser side every
minutes for approximately 20 minutes.
Water reservoir on the vaporizer side is removed and the heat exchanger is dried.
The initial pressures and temperatures is recorded before switching on the heat pump.
Power reading and temperature at the vaporizer outlet and condenser water temperature is
recorded every minute for approximately 20 minutes.
Steps ii and v is repeated but with a hot blower and cold blower for approximately 30cm
away.
2. What is the real-life/industrial/engineering application behind the theories of the
experiment (10 marks)
o Must be more than 50 words.
o Include any relevant reference that is cited for your answer.
o May include any relevant diagram.
o Put short answer (one sentence) in https://padlet.com/drfba/bten2182