Professional Documents
Culture Documents
ICS Telecom - Install Instructions
ICS Telecom - Install Instructions
Several steps are required to completely install ICS telecom on the hard drive:
Step 1 - installing the ICS telecom software
Step 2 - installing the dongle driver.
2. Control of settings
Some controls must be done before installation:
- Display of files in MSTM WindowsTM: to allow the reading and the copy of files, it is recommended to configure the files display in the MSTM Explorer:
go to View menu, then choose Options. Go to the View tab and select ‘show all files’ option for ‘hidden files’.
- For WindowsTM 2000 / XP system: before running the installation, check that your PC is log on ‘Administrator’, otherwise the dlls will not be copied
correctly..
- Display properties: choose 1024*768 or 1280*1024 display resolution.
- Program installation: to allow installation of the different libraries (dll), the machine must have a «C:\» driver.
- Program files attributes: the attribute of the «Program files» folder must be read/write to allow the correct installation of the software (unselect the
«read only» option in the properties box of the folder)
3. Notes
- Using modes: ICS telecom can be used locally (stand-alone dongle) or on a LAN (multi-licenses and multi-users dongle). In multi-licenses mode, the
application and its dongle are installed on a server that gives access to a given number of simultaneous users. To work in client/server mode, the MS
WindowsTM function ‘create semaphore’ is no more used. The principle is : the APPICSHTZ.log file that allows the management of simultaneous clients
is stored in the ICS telecom directory, and its update does not require the MS WindowsTM controls. In case of critical stop of the application, the .log file
is not decremented and will be incremented at each new user’s logg in. To avoid these increments, it is necessary to delete the APPICSHTZ.log file with
all ICS telecom working session closed.
- Printers: In ICS telecom, several dialogue boxes require the presence of printer drivers on the machine. When opening one of these dialogue boxes
and if no printer driver is installed on the machine, a system error may occur. It is necessary then to install at least one printer driver on the ma-
chine. Likewise, the modification of a local or network printer may cause printing errors. In this case:
1. Close ICS telecom
2. In the WindowsTM Start menu, choose Run, enter ‘REGEDIT’ and confirm
3. The Register editor window is open
4. Go in the HKEY_LOCAL_MACHINE\Software\ATDI folder - this folder contains a sub-directory named ‘Printi’ that is automatically generated during
the software installation
5. Delete ‘Printi’ sub-directory - it will be recreated at the next use of ICS telecom
6. Close the Register editor window and restart the machine
7. Run ICS telecom and try to print.