You are on page 1of 1

Setup on PC

Setting up 1.1.1.1 takes two minutes and requires no


technical skill or special software. Even if you’re a
computer novice, pick your device below for an easy-to-
follow setup guide.

iPhoneAndroidMacOSWindowsLinuxRouter
1. Click on the Start menu, then click on Control Panel.
2. Click on Network and Internet.
3. Click on Change Adapter Settings.
4. Right click on the Wi-Fi network you are connected to,
then click Properties.
5. Select Internet Protocol Version 4 (or Version 6 if
desired).
6. Click Properties.
7. Write down any existing DNS server entries for future
reference.
8. Click Use The Following DNS Server Addresses.
9. Replace those addresses with the 1.1.1.1 DNS
addresses:
o For IPv4: 1.1.1.1 and 1.0.0.1

o For
IPv6: 2606:4700:4700::1111 and 2606:4700:4700::
1001
10. Click OK, then Close.
11. Restart your browser.
12. You’re all set! Your device now has faster, more
private DNS servers ✌️✌️

You might also like