Professional Documents
Culture Documents
Most
commonly used for sprinkler system pipelines . Supplied complete with swivel nut.
Product Features
Knurled swivel nut facilitates easy installation
and vertical adjustment of pipe level post
installation.
Lips are dimpled at bends for models WPCS 48
and above, for added strength.
Swivel nuts are countersunk to prevent burring
or damage to threads.
• Also available with EPDM Lining which :
- eliminates contact between dissimilar materials
when clamps are used with non-ferrous pipe
- provides acoustic attenuation by minimizing
( transmission of high frequencies from piping to
building structure
- acts as a thermal barrier
-has a temperature range of -20°C to 110°C
Material : Steel
Finish : Electrogalvanised post manufacture
Standard Sprinkler EPDM lined Sprinkler
Options : EPDM Lined (suffix 'R')
Pipe Hanger (WPCS) Pipe Hanger (WPCS-R)
Epoxy Powder Coated finish (suffix 'P')
Hot Dip Galvanised finish (suffix 'HDG')
Stainless Steel construction (suffix 'SS')
~.
www.weicco.com WPCS 1A3013
MOODY
Product spc::cifications are subject to ch~ without prior nottce INTERNATIONAL •• ISO 9001 :2008
Recommended for suspension of plain or insulated stationary piping. Design provides key benefit of substantial
level adjustability after installation. WEICCO offers special intermediate sizes to suit any insulated pipe OD.
Product Features
WCH hangers allow vertical level adjustment of 20 to
150mm (based on hanger size) after pipe installation.
This helps in effective leveling of piping systems.
Besides the table below, we offer intermediate sizes '
designed to closely fit the effective pipe 00 for any
insulation thickness. This enhances installation quality
by avoiding usage of oversize hangers.
:l'=-- =l
- -lJ
Material : Steel
( Finish: Electrogalvanised post manufacture
Options: EPDM Lined (suffix 'R')
Epoxy Powder Coated finish (suffix 'P') c@us . . ,. __ __ re~Sb~~~~
YOKE
ROD
~··'"
www.weicco.com WCH 1A0513
Product &pectfication! a re subject w change without prior notice r,?£1.9.~ ISO 9001:2008
--
Heavy duty U-Bolts designed to grip, guide or support plain and insulated pipes.
Product Features
Supplied complete with four nuts.
Besides models listed in the table below, a full range
of intermediate sizes is available to match the ODs
of WEICCO RSI, providing a simple and effective
support solution for insulated pipe.
WEICCO U-Bolts are available with EPDM sleeve,
to prevent contact between dissimilar materials when
used with copper, plastic, aluminum or glass pipe.
Lining has a temperature range of -2o•c to 11o•c.
Application for suspension of
horizontal insulated pipe
Material : Steel
Finish : Electrogalvanised post manufacture
Options : U-Bolt with EPDM sleeve (suffix 'R')
Epoxy Powder Coated finish (suffix 'P')
/
\ Hot Dip Galvanised finish (suffix 'HDG')
Stainless Steel construction (suffix 'SS') H
Brass construction (suffix 'BR')
~-
www.weicco.com UB 1C651 3
MOO Y
INTERNATII?NAL
Product specifications are subject to c.lua.ngc: without prior notice
01 •
ISO 9001:2008
Ductile iron C-clamp designed for providing attachment of threaded rod to steel beams or purlins, without the
need for drilling or welding. W EICCO WBC is suitable for installation at both upper and lower flanges of beams.
Product Features
Suitable for use with 1-beams, channels, angles or
steel roof purlins with up to 22mm flange thickness.
Suitable for threaded rod sizes from 10mm to 24mm.
Convenient means of suspending pipelines, ducting,
false ceilings or equipment from structural members,
without the need for drilling or welding.
Permit vertical level adjustment post installation.
WBC clamps are denoted as 'universal' on account of
their versatile design, which provides a single product
solution for various application situations.
a) They can be attached to either the upper or lower
horizontal flanges of beams.
b) The threaded suspension rod may either be fixed
'
I
offset from the edge of the flange or directly under
and inline with the set screw.
The deep throat design of WBC clamps helps ensure Retaining Strap
an effective grip on the beam flange. BCRS Retaining Strap, available as an optional
Supplied complete with hardened set screw, lock-nut. extra, provides additional installation safety by
preventing horizontal slippage of the clamp.
WBC are suitable for applications requiring seismic
restraint when used along with BCRS retaining straps. May be ordered by specifying strap model and
length required. The length selected should be
appx. 120mm more than width of beam flange.
Material : Ductile Iron
Finish : Electrogalvanised
Material : Steel
Finish : Electrogalvanised post manufacture
~.
Stockist : WBC 1J0509
MOODY
Product spec1fications are subject to change without poor notice IM'ERNAllONAI. '" I ISO 9001 :2000