Professional Documents
Culture Documents
T: 0086-769-82166666 82136666
F: 0086-769-82955240 82955241
E: mail@kinlong.com
H: www.kinlong.com www.kinlong.com
Contents
Order Instruction 04
T-bolt 26
3D Adjustable Fixtures 28
Installation Instruction 31
Typical Projects 32
Advantage and Application
01
Product Performance Testing
Complying with the construction products regulation (CPR 305/2011/EU), and obtaining the
CPR Certificate from CE.
Passing the following test conducted by China National Construction Engineer Quality
Supervision Inspection Center and EU SGS.
Carrying capacity of concrete in tension and shear load capacity test 180 min fire-resistance test
Test Report
02
03
Order Instruction
1.Ordering example for anchor channel: RX50-26-300(Multi-element alloy co-permeation)
Note: RX50-26 is product model, 300 is groove length and information in parenthesis is surfacefinish.
RX40-22 Steeltank
200 150 2
RX50-26
Anchoring bar
RXY50-26D
RXY50-26
RXG50-26
250 200 2
RX52-34
RXY52-34
RXY52-34G
300 125 3
RXH50-26
RXH52-34
350 150 3
RCG50-26
RCY50-26D
400 175 3
RCY50-26G
RC53-34
450 200 3
250 150 2
YMX50-26
YMX50-26D 300 200 2
YMX50-26G
YMX50-26H 300 100 3
YMC50-26
YMX52-34 350 125 3
400 150 3
450 175 3
Remark:
M Thread Specification
S Thread Length
nick Lb T-bolt Length
04
Alloy Steel Bolt
Performance Grade A2-70 FA-80 A2-70 FA-80 A2-70 FA-80 A2-70 FA-80
Length L b (mm) 60 65 70 75
3.Ordering example for the anchor channel used in corner: ZJ-RX50-26-300(Multi-element alloy
co-permeation)
Note: ZJ is a special code which means use in corner. RX50-26 is product model. 300 is groove
length and information in parenthesis is surface finish.
300 100 4
External Corner
(ZJ)
350 150 4
300 125 4
Internal Corner
(ZJA)
350 150 4
Note: If other types or different angles are needed,please consult KIN LONG technical department for
supporting.
05
Material and Process
1.Material
2.Surface Finish
Characteristic of multi-
element alloy co-permeation:
Corrosion
T-bolt Application Environment
Intensity Anchor Channel
Structural Steel(Multi-
Structural Steel
element alloy Applied to indoor environment(e.g. the inside of
C3 (Multi-element
co-permeation) residences,office blocks,hotels,schools,hospitals
(Medium) alloy co-
etc. ) except for persistent damp environment.
permeation) Stainless Steel(A2-70)
Note: The classification of corrosion intensity is in accordance with the standard GB/T 19292.1-2003
Corrosion of Metals and Alloys---Corrosivity of Atmospheres---Classification)
06
3.Welded Anchor Channel Process Features
Robot welding
Good welded joint
Reliable quality of mass production
Efficient production, fast delivery
07
Groove Embedded Parts Calculation
It is calculated according to EU construction products regulation EOTA-TR-047 rigorously.
Tension
Verification
Bolt Verification Resultant Force
Verification
Shear Force
Verification
Tension
Verification
Anchor Bar Resultant Force
Verification Verification
Shear Force
Verification
Steel
Verification Tension
Verification
Anchor Bar Joint Resultant Force
Verification Verification
Shear Force
Verification
Tension
Verification
Bending Qualified
Verification
Tension
Damage
Cone Breaking
Tension Verification
Splitting
Breaking
Concrete Resultant Force
Verification Verification
Side Breaking
Edge Breaking
Shear Force
Verification
Pry out
damage
08
Minimum Edge Distance and Minimum Bolt Spacing
52-34
Notch Specification 40-22 50-26
53-34
C m i n (mm) 50 75 100
e m i n (mm) 25 50 75
Note: When installing, ensure the minimum distance between the anchor channel and component, which
depends on the selected anchor channel model and corresponding T-bolt.
09
Welded Groove Embedded Parts
RX40-22 Series
RX50-26 Series
RXG50-26 Series
RXY50-26D Series
RXY50-26 Series
10
RX52-34 Series
RXY52-34 Series
RXY52-34G Series
RXH50-26 Series
RXH52-34 Series
11
Front Face Embedded Site Condition:
Note:
1. The recommended bearing capacity of single point
listed in the following table is the common combined
load value for your reference, please consult
“KIN LONG ”for recheck and calculation if your value is
not in it.
2. The design values in the table are calculated
according to CEN/TS 1992-4-3, and the partial factor is
selected according to CEN/TS 1992-4-1. The component
steel partial factor is 1.8, and the concrete partial factor
is 1.5.
3. The design values listed in the table are certified
according to the cracked concrete and reinforced
concrete structure.
100 16 5 TA-M16
RXG50-26 200 150 300/3
150 21.5 5 TB-M20
100 19 7 TA-M16
RXH50-26 250 150 300/3
150 24.5 7 TB-M20
12
Top Slab Embedded Site Condition:
Note:
1. The recommended bearing capacity of single point
listed in the following table is the common combined
load value for your reference, please consult
“KIN LONG ”for recheck and calculation if your value is
not in it.
2. The design values in the table are calculated
according to CEN/TS 1992-4-3, and the partial factor is
selected according to CEN/TS 1992-4-1. The component
steel partial factor is 1.8, and the concrete partial factor
is 1.5.
3. The design values listed in the table are certified
according to the cracked concrete and reinforced
concrete structure.
130 3 6.5
75
200 3 8
RX40-22 125 300/3 TB-M12
130 5 9.5
125
200 5 12
130 3 8
100
300 3 11.5 TA-M12
RXY50-26D 125 300/3
130 5 11 TA-M16
150
300 5 16.5
130 5 7.5
100
RX50-26/ 300 5 10.5 TA-M12
125 300/3
RXY50-26 130 7 10.5 TA-M16
150
300 7 16
13
Top Slab Embedded Site Condition:
Note:
1. The recommended bearing capacity of single point
listed in the following table is the common combined
load value for your reference, please consult
“KIN LONG ”for recheck and calculation if your value is
not in it.
2. The design values in the table are calculated
according to CEN/TS 1992-4-3, and the partial factor is
selected according to CEN/TS 1992-4-1. The component
steel partial factor is 1.8, and the concrete partial factor
is 1.5.
3. The design values listed in the table are certified
according to the cracked concrete and reinforced
concrete structure.
180 7 14
150
350 7 20 TA-M16
RXG50-26 150 300/3
180 12 16.5 TB-M20
200
350 12 23
220 12 14.5
150 TA-M16
400 12 18.5
RXH50-26 150 300/3 TB-M20
220 12 19.5
200
500 12 27.5 TB-M20
180 12 17
200
RX52-34/ 350 12 25 TA-M16
150 300/3
RXY52-34 180 12 21 TA-M20
250
350 12 32
180 12 20 TA-M16
200
400 12 27 TA-M20
RXH52-34/
150 300/3
RXY52-34G 180 12 25
250 TA-M20
400 12 38
14
Riveted Groove Embedded Parts
YMX50-26D Series
YMX50-26 Series
YMX50-26G Series
YMX50-26H Series
YMX52-34 Series
15
Front Face Embedded Site Condition:
Note:
1. The recommended bearing capacity of single point
listed in the following table is the common combined
load value for your reference, please consult
“KIN LONG ”for recheck and calculation if your value is
not in it.
2. The design values in the table are calculated
according to CEN/TS 1992-4-3, and the partial factor is
selected according to CEN/TS 1992-4-1. The component
steel partial factor is 1.8, and the concrete partial factor
is 1.5.
3. The design values listed in the table are certified
according to the cracked concrete and reinforced
concrete structure.
16
Top Slab Embedded Site Condition:
Note:
1. The recommended bearing capacity of single point
listed in the following table is the common combined
load value for your reference, please consult
“KIN LONG ”for recheck and calculation if your value is
not in it.
2. The design values in the table are calculated
according to CEN/TS 1992-4-3, and the partial factor is
selected according to CEN/TS 1992-4-1. The component
steel partial factor is 1.8, and the concrete partial factor
is 1.5.
3. The design values listed in the table are certified
according to the cracked concrete and reinforced
concrete structure.
130 5 6.5
100
300 5 9 TA-M12
YMX50-26D 125 300/3
130 7 9 TA-M16
150
300 7 13.5
180 7 13
150
350 7 18 TA-M16
YMX50-26 150 300/3
180 12 14 TB-M20
200
350 12 20
180 7 14
150
350 7 20 TA-M16
YMX50-26G 150 300/3
180 12 16.5 TB-M20
200
350 12 23
220 12 14.5
150
400 12 18.5 TA-M16
YMX50-26H 150 300/3
220 12 19.5 TB-M20
200
500 12 27.5
180 12 16
200
350 12 22 TA-M16
YMX52-34 150 300/3
180 12 20 TA-M20
250
350 12 28
17
Anchor Channel with Teeth Groove
RCY50-26D Series
RCY50-26 Series
RCY50-26G Series
RCG50-26 Series
RCH50-26 Series
RC53-34 Series
YMC50-26 Series
18
Front Face Embedded Site Condition:
Note:
1. The recommended bearing capacity of single point
listed in the following table is the common combined
load value for your reference, please consult
“KIN LONG ”for recheck and calculation if your value is
not in it.
2. The design values in the table are calculated
according to CEN/TS 1992-4-3, and the partial factor is
selected according to CEN/TS 1992-4-1. The component
steel partial factor is 1.8, and the concrete partial factor
is 1.5.
3. The design values listed in the table are certified
according to the cracked concrete and reinforced
concrete structure.
100 7.5 5 8
RCY50-26 300 125 300/3 YCA-M16
150 12.5 5 8
RCG50-26/ 100 11 7 10
300 125 300/3 YCA-M16
RCY50-26G 150 19 7 10
200 15 7 10
RCH50-26 400 200 300/3 YCA-M16
250 18.5 7 10
100 8.5 5 8 YCA-M12
YMC50-26 300 150 300/3
150 14.5 5 8 YCA-M16
200 19 7 17
RC53-34 400 200 300/3 YCK-M16
150 24 7 17
19
Top Slab Embedded Site Condition:
Note:
1. The recommended bearing capacity of single point
listed in the following table is the common combined
load value for your reference, please consult
“KIN LONG ”for recheck and calculation if your value is
not in it.
2. The design values in the table are calculated
according to CEN/TS 1992-4-3, and the partial factor is
selected according to CEN/TS 1992-4-1. The component
steel partial factor is 1.8, and the concrete partial factor
is 1.5.
3. The design values listed in the table are certified
according to the cracked concrete and reinforced
concrete structure.
20
Top Slab Embedded Site Condition:
Note:
1. The recommended bearing capacity of single point
listed in the following table is the common combined
load value for your reference, please consult
“KIN LONG ”for recheck and calculation if your value is
not in it.
2. The design values in the table are calculated
according to CEN/TS 1992-4-3, and the partial factor is
selected according to CEN/TS 1992-4-1. The component
steel partial factor is 1.8, and the concrete partial factor
is 1.5.
3. The design values listed in the table are certified
according to the cracked concrete and reinforced
concrete structure.
21
U-shape Reinforced Groove Embedded Parts
(Anchor channel)For thin slab with facial
installation,h ≥ 120mm;
RUA52- 34 Series
Recommended
Value of Load 26 50 56
Capacity
Note:
Node design value must meet the
requirement of tensile force F N , shearing
force F V , resultant force F R e s .
Node design value must meet the
requirement of tensile force F N , shearing
force F V , resultant force F r e s .
Calculation Example:
1.Project information:
Concrete Mechanical Testing Parameters: The project 's slab thickness is 130mm,
concrete strength is C30, edge distance
Concrete strength is C30.Refer to next page for the C=170mm,Design value of anchor channel:
layout drawing of concrete rebar and anchor channel; F N d =20KN,F V d =40KN
Equipped with two T bolts TA-M20, spacing 150mm;
2.Load capacity verification:
Ultimate load standard values (see test report):
F N d =20KN<26KN Qualified
F N T = 80KN F V T =150KN
F V d =40KN<50KN Qualified
Resultant force of ultimate load standard values: F d R e s =(F N d 2 +F V d 2 ) 0 . 5 =44.7KN<56KN
F T R e s = (F N T 2 + F V T 2 ) 0 . 5 = 170KN Qualified
22
Reinforced Concrete Layout
23
Groove Embedded Parts for Steel Structure
YGX50-26
YGX52-34
Recommended Bearing
Capacityof Single
Model F(mm) E(mm) T 1 (mm) T 2 (mm) H(mm) Point (KN) ApplicationDiagram
FN FV
320 90 4 6 110 20 10
YGX50-26
320 100 4 6 120 24 9
Order Instructions:
1.When ordering, please provide the dimension value of “H”;
2.The recommended values in the table are calculated by standard products for your reference, please
consult “KIN LONG” for customization if they don't meet your demand.
24
Double-row Groove Embedded Parts
SP-RX50-26
SP-RX52-34
Recommended Bearing
Capacity (KN) ApplicationDiagram
Model C m i n (mm) h m i n (mm) P(mm) T(mm) L/n(mm)
Bolt quantity FN FV
100 120 4 40 20
SP-RX50-26 150 100 350/3
150 200 4 46 26
100 170 4 48 26
SP-RX52-34 150 100 350/3
150 250 4 56 30
Notes: The specification parameters of KIN LONG standard double-row groove embedded parts are shown in
the table. If the specifications of adjusting parts for customer's engineering needs are not within the scope of
the table, you can contact our company to customize them.
25
T-bolt
TA-M10 Series
TA-M12 Series
TA-M16 Series
TA-M20 Series
TB-M12 Series
TB-M20 Series
26
YCA-M12 Series
YCA-M16 Series
YCK-M16 Series
Mechanical properties
Bolt Specification M10 M12 M16 M20
8.8 8.8 8.8 8.8
Performance Grade A2-70 FA-80 A2-70 FA-80 A2-70 FA-80 A2-70 FA-80
level level level level
Recommended Value
of Tensile Bearing 21 17 19 31 25 28 59 47 53 75 84 94
Capacity(KN)
27
3D Adjustable Fixtures
Application Diagram
MT08A
MT10A
No. S(mm) E(mm) L(mm) C(mm) T(mm) H(mm) Order Instructions Application Diagram
1.When ordering,
13
please provide the
1 125 200 100 155 ≤120 dimension value of
17 S,E,L,C,H and T;
2.Please contact
“KIN LONG” for
13 customization if our
2 150 230 150 205 ≤150 standard specification
cannot meet your
17
demand.
28
CM06G
CM06A
CM08A
No. S(mm) E(mm) L(mm) C(mm) H(mm) Order Instructions Application Diagram
29
Hanger for Stone Curtain Wall
GJ-S4
GJ-D4
GJ-T4
Note:1.If your required specification is not in the table, please contact “KIN LONG” for customization.
2.The stone pendants thickness tolerance is in accordance with the standard GB-T4237 <Stainless Steel
Hot-rolled Steel and Strip > in table 2 for common precision tolerance requirements.
30
Installation Instruction
Step 1: Template Fixing
Fixing the anchor channel on the template before the concrete pouring. According to different template
material, there are some other fixing ways for the anchor channel as followings:
NailFixiing Staple Bolt Fixing Aluminium Rivet Nail Fixing T-bolt Fixing
Protection Template
When making the top slab embedded, a protection plate
should be arranged on the groove of the anchor. It can
not only avoid the damage on the surface plating (and
the affection to the corrosion resistance performance )
during the construction, but also can ensure the groove
is in the same level with the concrete surface.
31
Typical Projects
The Riyadh Metro (Arabic: )اﻟــــرﯾﺎض ﻣﺗـــــروis a rapid uplift automatic stairs. The front design allows the light
transit system serving the city of Riyadh. It consists to enter the station. The air conditioning allows
of 6 metro lines spanning a total length of 176 passengers to keep cool. According to the design, the
kilometers with 85 stations. The project cost $22.5 shell can stop the strong desert light while keep the
billion to build. It is scheduled to open in 2019. It proper light in the station. The overall image of the
will be the world's most luxurious subway station. subway station reminiscent of the country's distinctive
The outer appearance looks like a “dune” while the style of sand in the wind, can be described as ingenuity
inner space is very big . It uses a space design The project uses KIN LONG hot-rolled welded anchor
theme with a marble walkway, gold-plated wall and channel RX52-34 Series with total length about 46km.
Parcel F
32
TORREKOI
Chongqing Raffles City terminal and visitor center. The design of the project
originated from the shipping culture that
accumulated in the past thousands of years in
Chongqing, forming a powerful sails on the river
surface with the height of 350 meters and 250 meters
respectively. A symbol of Chongqing's "ladder"
appearance of the Crystal Covered Bridge 300
meters long, the four towers connected to each other
in the 60-story, 250-meter high-altitude collection of
hotels, shopping, leisure centers and other
comfortable spacious public space at night , like a
bright glass ribbons stand in overturned waters.
“Chongqing Raffles City ” is located at
Upon completion, it will be the new landmark of
Chaotianmen ,the intersection of the Yangtze
Chongqing's tallest building in the southwest of
River and the Jialing River, is also known as
China.
Chongqing's "Astrophotography." It integrates a
various of public transport facilities both for land The project uses KIN LONG automatic welded
and water, and sets up underground viaducts, light anchor channel RXY50-26 series about 60,000 sets,
rail stations and transit buses station, harbor T-bolt TA-M12 about 120,000 sets.
33
Zhuhai Hengqin IFC Tower
34
Nanjing Golden Eagle Plaza
Loncin·Chongqing Center
35
China New Beijing Center
China Zun
36
China Energy Storage Building
37
Shenzhen Shenye Logistic Center
38
Changsha Huijing Development Global Center
39
Shenzhen Center • Tianyuan
40
Beijing China Airlines Capital Building
China Airline Capital Building is located at No.626 block, NO.2 Wang Jing
Village, Cui Ge Zhuang town ,Chaoyang District, Beijing City with a
construction standard of 5A Grade A office space. The dynamic elasto-
plastic time-history analysis of China Aviation Capital Tower under the
condition of rare earthquakes of 8 degrees is carried out by using MIDAS
Building. Compared with the analysis of large-scale elastic time-history ,
the damage mechanism and plasticity development of the structure under
rare earthquakes are studied, aim to improve the seismic performance of
buildings.
This project uses KIN LONG hot-rolled automatic welded anchor channel
about 7,000 sets, T-bolt T-M16 about 14,000 sets.
41