Professional Documents
Culture Documents
ANSI/ASME B16.25 is the standard covers the preparation of butt welding ends of piping
components to be joined into a piping system by welding. The standard includes the butt
welding ends information of General scope, Welding Bevel designs, Preparation of inside
diameter of welding ends and the tolerances involved.
Following are the dimensions of the butt welding pipe ends according to ANSI B16.25.
TYPE_ A TYPE_ B
For Wall Thickness(t) 0.188(4.8) to 0.875(22.2) Inclusive For Wall Thickness(t) More Than 0.875(22.2)
In mm wall In mm In mm In mm In mm In mm
40 2.88 43 2.96 75 2.469 62.7 2.479 62.95 0.203 5.15
In mm wall In mm In mm In mm In mm In mm
40 6.065 154 6.094 154.8 0.28 7.1
In mm wall In mm In mm In mm In mm In mm
STD 15.25 387 15.303 388.7 0.375 9.55
40 15 381 15.084 383.15 0.5 12.7
60 14.688 373 14.811 376.2 0.656 16.65
80 16 406.4 16.25 413 14.312 364 14.482 367.85 0.844 21.45
16 400
100 13.938 354 14.155 359.55 1.031 26.2
In mm wall In mm In mm In mm In mm In mm
10 29.376 746 29.413 747.1 0.312 7.9
30 750 20 30 762 30.38 772 29 737 29.084 738.75 0.5 12.7
30 28.75 730 28.865 733.15 0.625 15.9
10 32 812.8 32.5 825 31.376 797 31.413 797.9 0.312 7.9
20 31 787 31.084 789.55 0.5 12.7
32 800
30 30.75 781 30.865 783.95 0.625 15.9
40 30.624 778 30.755 781.2 0.688 17.5
10 34 863.6 34.5 876 33.376 848 33.413 848.7 0.312 7.9
20 33 838 33.084 840.35 0.5 12.7
34 850
30 32.75 832 32.865 833.75 0.625 15.9
40 32.624 829 32.755 832 0.688 17.5
10 36 914.4 36.5 927 35.376 899 35.413 899.5 0. 312 7.9
20 35 889 35.084 891.15 0.5 12.7
36 900
30 34.75 883 34.865 885.55 0.625 15.9
40 34.5 876 34.646 880 0.75 19.05
NOTES:
(1) Letter designations signify
(a) STD = standard wall thickness
(b) XS = extra-strong wall thickness
(c) XXS = double extra-strong wall thickness
(2) The diameters listed are not requirements. They are provided for the convenience of the user.
(3) Internal machining for continuous backing rings for sizes DN 50 (NPS 2)and smaller is not contemplated.