You are on page 1of 2

<<Contents>> <<Index>>

General Model VI702


Specifications Vnet/IP Interface Card

GS 33J50C10-01EN

[Release 6]

GENERAL
n PARTS NAME AND FUNCTIONS
n
By installing the control bus interface card into the PCI RDY lamp
Express slot of the PC/AT compatible computer, the Lights when it diaghoses the card as normal.
computer is connected to Vnet/IP.
RCV lamp
Lights when it detects signals on a control bus.
FUNCTION
n SND lamp
Interface between the PCI Express and Vnet/IP Lights when it sends signals to a control bus.
Ethernet connector
Connects a CAT5e (Enhanced Category 5 cable)
STANDARD SPECIFICATIONS
n
Communication Speed
1 Gbps Full Duplex
Connection Specifications
MODEL
VI702
STYLE
S1
Cable: CAT5e (Enhanced Category 5 cable), UTP BUS1
RCV

Transmission: 1000BASE-T compliance


Connector: RJ45 connector RCV lamp
Max. distance: 100 m (Distance between VI702 and Ethernet connector SND
Layer 2 switch) SND lamp
RDY

PCI Express Specifications


RDY lamp BUS2
Applicable revision: RCV

PCI Express CEM Specification 1.0a x1,


2.5 GT/s signaling
This card can be installed in a PCI Express slot (x1 SND
U
to x16). H
F
This card cannot be installed in a PCI slot.
Voltage
Power supply voltage: 3.3 V ± 9 %
Current Consumption F01E.ai

Max. 2.5 A
Weight Figure Vnet/IP Interface Card (Front )
Approx. 0.18 kg

Yokogawa Electric Corporation GS 33J50C10-01E


2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan ©Copyright Feb. 2015 (YK)
Tel.: 81-422-52-5634 Fax.: 81-422-52-9802 1st Edition Feb. 1, 2015 (YK)
<<Contents>> <<Index>> 2
EXTERNAL DIMENSIONS
n
Unit : mm

21.59 180.97

126.31

F02E.ai

Nominal Tolerances :
When the reference dimension is over 0.5 mm and equal or less than 120 mm, its nominal tolerance is ± 0.8 mm, while its
combination of nominal tolerance is ± 1.5 mm.
When the reference dimension is over 120 mm, its nominal tolerance is in accordance with JEM 1459.

MODEL AND SUFFIX CODE


n
Description
Model VI702 Vnet/IP Interface Card

APPLICABLE STANDARDS
n
Refer to the GS “Integrated Production Control System CENTUM VP System Overview” (GS 33J01A10-01EN).

ORDERING INFORMATION
n
Specify model.

TRADEMARKS
n
• CENTUM and Vnet/IP are registered trademark of Yokogawa Electric Corporation.
• Other company and product names appearing in this document are trademarks or registered trademarks of their
respective holders.

All Rights Reserved. Copyright © 2015, Yokogawa Electric Corporation GS 33J50C10-01EN Feb 1, 2015-00
Subject to change without notice.

You might also like