You are on page 1of 3

GC3 – THE HEALTH AND Candidate’s observation

SAFETY PRACTICAL APPLICATION sheet

Sheet number of _____

Student name: KENT JUDE F. ODENA Student number: SN. 00440311

Place inspected: BOILER AREA (UNIT1) Date of inspection: 06-20-2018

Observations Control measures


Timescale
Hazards and Consequence Immediate and longer term actions
MECHANICAL HAZARDS Immediate actions: Now
Observation: Stop work
1.Worker using speed cutter with- Mid Term actions:
out using a face shield. Give disciplinary action
Consequences: Long Term action:
May cause eye injury, such Schedule of training
as deep puncture wounds.
Observation:
2. Worker doing cladding and
handling tin sheet without wearing
hand gloves.
Consequences:
May cause hand laceration.
Observation:
3, Workers using grooving
machine without guarding.
Consequences:
May cause severed fingers or
Crushed hands and arms.

ELECTRICAL HAZARDS
Observation:
4.Worker doing pulling of electrical
cable in 5th floor of boiler area
north side at unit1, without putting
any signage and barricade with-
in the perimeter area of the activity
Consequences :
It may result to tripping of
some passer’s by.
Observation:
5.Worker doing An electrical
tapping without switching off the
main electrical panel board.
Consequences:
May cause shock and burns.
Observation:
6, Worker working in electric
energized room without PERMIT
TO WORK and no proper LOTO
Training.
Consequences:
It could result cardiac arrest
Severe burns or probable death,

/conversion/tmp/scratch/390582950.doc
GC3 – THE HEALTH AND Candidate’s observation
SAFETY PRACTICAL APPLICATION sheet

Sheet number of _____

Student name: KENT JUDE F. ODENA Student number: SN. 00440311

Place inspected: BOILER AREA (UNIT1) Date of inspection: 06-20-2018

FIRE HAZARDS
Observation:
7. Worker doing an welding works
without using fire blanket and
without eliminating combustible
materials on the ground.
Consequences:
May cause fire accident due to the
present of combustible materials
if welding fluxes contact.
Observation:
8. Workers are connecting more
supply of electricity in one source
that over the load capacity of
the source.
Consequences:
May cause overloading that leads
to overheating of circuit com-
ponents and may cause fire.
Observation:
9. Worker is smoking in non
smoking area at behind of diesel
tank.
Consequences:
May cause fire or explosion.
Observation:
10. Worker are doing hot works
by cutting of structural beam
without a fire extinguisher in
the area of activity.
Consequences:
Cutting works may cause fire and
If, there are no any control to fight
against fire
Observation:
11. A group of workers are doing
a pipe line test of a diesel pipe
for supply to diesel generator room
without coordinating to other sub-
con of what their activity because
some sub-con are doing hot works
Consequences:
May cause fire or explosion if
pipe leaks.

/conversion/tmp/scratch/390582950.doc
GC3 – THE HEALTH AND Candidate’s observation
SAFETY PRACTICAL APPLICATION sheet

Sheet number of _____

Student name: KENT JUDE F. ODENA Student number: SN. 00440311

Place inspected: BOILER AREA (UNIT1) Date of inspection: 06-20-2018

CONFINED SPACE HAZARDS


Observation:
12. A group of workers are doing
a confined space activity without
taking a gas testing test.
Consequences:
May cause suffocation, inhalation
of toxic gas and explosion.
Observation:
13. Poor lightings and poor
Ventilation in confined space
Activity.
Consequences:
May cause heat stroke and eye
discomfort can leads to accident
and injury.

WORKING@HEIGHTS HAZARDS
Observation:
14. Worker doing insulation of hot
piping at scaffolding working
platform without a full body
harness.
Consequences:
Possible the worker will fall
and can leads to injury or death.
Observation:
15.A scaffolding working platform
was not yet inspected or green tag
but some workers are doing works
there.
Consequences:
may the scaffold will collapse or
some object will down can leads
To injury or fatality.

/conversion/tmp/scratch/390582950.doc

You might also like