The document lists other non-ASTM steel specifications that are acceptable alternatives to ASTM specifications under certain conditions. It provides a table with the latest adopted edition and other acceptable earlier editions for each alternative specification. The table notes that the alternative specifications are identical except for differences in things like steelmaking process, chemical composition, marking, and test reports as shown in each specification.
Original Description:
Original Title
materiales aceptables no ASTM ASME_BPVC_Section_II_Materials_Part_A_Fe
The document lists other non-ASTM steel specifications that are acceptable alternatives to ASTM specifications under certain conditions. It provides a table with the latest adopted edition and other acceptable earlier editions for each alternative specification. The table notes that the alternative specifications are identical except for differences in things like steelmaking process, chemical composition, marking, and test reports as shown in each specification.
The document lists other non-ASTM steel specifications that are acceptable alternatives to ASTM specifications under certain conditions. It provides a table with the latest adopted edition and other acceptable earlier editions for each alternative specification. The table notes that the alternative specifications are identical except for differences in things like steelmaking process, chemical composition, marking, and test reports as shown in each specification.
Other Acceptable Non-ASTM Specifications Latest Other Acceptable Editions Specifications Adopted Description [Note (1)] SA/AS-1548 2008 Identical except for steelmaking process, marking, chemical 2008 (R2018) composition, and test reports as shown in the specification. Appendix "Interchangeability of Strength Grades" does not apply. SA/CSA-G40.21 2013 Identical except for marking, chemical composition, controlled 1992 and 2004 through 2013 (R2018) and normalized rolling, and test reports as shown in the (R2018) specification. SA/EN 10025-2 2019 Identical except for marking, chemical composition, … resurfacing by welding, and test reports as shown in the specification. SA/EN 10028-2 2017 Identical except for marking, delivery condition, chemical 2003 through 2017 composition, tension test, impact test sampling, steelmaking process, quality, and test reports as shown in the specification. For Grade 13CrMo4-5, other acceptable editions are limited to 2009 and later. For other acceptable editions prior to 2017, plate thickness shall not be greater than 250 mm. SA/EN 10028-3 2017 Identical except for marking, chemical composition, impact 2003 through 2017 test sampling, steelmaking process, quality, and test reports as shown in the specification. For other acceptable editions prior to 2017, plate thickness of Grades P460NH, P460NL1, and P460NL2, shall not be greater than 100 mm. SA/EN 10028-4 2017 Identical except for marking, chemical composition, tension, 2003 through 2017 impact tests, steelmaking process, surface imperfections, repair welding, and test reports as shown in the specification. SA/EN 10028-7 2016 Identical except for marking, heat treatment and test reports, 2000 through 2016 as shown in the specification. For the latest adopted edition, heat treatment shall be per the Tables of Annex A; for other acceptable editions prior to 2007, heat treatment shall be per the Tables of Annex B. For other acceptable editions prior to 2016, plate thickness of Grades X2CrNi12 and X6CrNiTi12, shall not be greater than 25 mm. SA/EN 10088-2 2014 Identical except for marking, dimensions, delivery condition, 2005 through 2014 resurfacing by welding, extent of testing, and test reports as shown in the specification. SA/EN 10088-3 2014 Identical except for marking, dimensions, test/inspection 2005 through 2014 documents, repair welding, heat treatment, and surface quality as shown in the specification. SA/EN 10216-2 2013 Identical except for marking and test reports as shown in the 2002+A2:2007 through 2013 specification. SA/EN 10217-1 2019 Identical except for material, inspection, marking, resurfacing … by welding, and test reports as shown in the specification. SA/EN 10222-2 2017 Identical except for marking, resurfacing by welding, and test … reports as shown in the specification. SA/GB 713 2014 Identical except for chemical composition, marking, controlled … rolling, heat treatment, and test reports as shown in the specification. SA/IS 2062 2011 Identical except for chemical composition, marking, … mechanical property limits, delivery condition, repair qualification, and test reports as shown in the specification.