2.2.1 Low Voltage System Design Basis 2.2.2 Environmental Condition and Climate Factor 2.2.3 Equipment Specifications and Material Parameters 2.3 Applicable Codes and Standards 2.4 Methodology
Chapter 3 – Electrical System Design Calculations and Analysis
Synopsis: This chapter discusses different calculation and analysis such as transformer sizing, the motors and cable analysis, protection devices assessments and the like that applies specifically for the RO plant of phase 1 area. This chapter will presents substantial evaluations and application of several standards of electrical calculation as enumerated below for the assessment of the initial design and conduct additional analytical work that has not performed in the early design.
3.1 Feeder Cable calculation and Over-current protection
3.2 Transformer, Generators, Fire pump size determination 3.3 Voltage Drop Calculation 3.4 Load Flow Analysis 3.5 Short-circuit Calculation 3.6 Protection Coordination and Analysis 3.7 Arc Flash Analysis 3.8 Harmonics Analysis and Mitigation 3.9 Grounding system 3.10 Fire Detection and Alarm System (FDAS)
Chapter 4 – Materials and Equipment Specifications
Synopsis: In this part, all the equipment specifications, ratings and material data will be provided in this chapter.