Professional Documents
Culture Documents
Trainingg Plcs PDF
Trainingg Plcs PDF
Study and
programming in PLC
language
TSX Micro on support with sockets
The "TSX Micro on support with sockets" consists in a PLC TSX Micro installed on a
support including sockets for various connections. It is designed for people who want to learn
programming a PLC in language "List / Ladder, Litteral and Grafcet".
1.1 Composition
This assembly is designed for easy and safe connection to operative parts or equipments.
A printing next to each socket represents the inputs/outputs.
Various LED give information on the operation or the status of the PLC inputs and outputs.
A socket for simulation plugged in parallel to the inputs allows testing of a program or an
application without operative part.
A built-in power supply "Phaseo" 24 Vdc 4,2 A can supply the actuators following their
characteristics.
www.schneider-electric.com/educationalequipments 3/16
TSX Micro on support with sockets
1.2 Data
Mechanical data
Enclosure : height: 250 mm, width: 400 mm, depth: 350 mm
Weight: 5 kg approximately
Electrical data
Voltage: 230V single-phase ± 10 %
Power absorbed: 30 VA
Frequency: 50 Hz ± 5 %
Current: 16 A, connection by plug 2Ph + Earth
Conventional short-circuit current: 3 kA.
Rated surge withstand voltage: 2.5 kV
Class of protection to electric shocks: ll
The electrical network must be fitted upstream of the equipment with an RCD (Residual
Current Device) with a sensitivity of ≤ 30 mA class AC (not supplied).
4/16 www.schneider-electric.com/educationalequipments
TSX Micro on support with sockets
The "TSX micro on support with sockets" can be used with or without operative part:
Without operative part, simulating a program:
Manipulations can be carried out on the PLC: creation or loading of programs, simulation
with the switches of the test module and the indicators of the display unit located on the front
panel of the TSX Micro.
www.schneider-electric.com/educationalequipments 5/16
TSX Micro on support with sockets
2. Training course
The hands-on exercises that can be carried out using the "TSX Micro on support with
sockets" are different depending on the operative parts connected to it.
An example of "traffic management" that can be performed without operative part is given
in the following pages.
6/16 www.schneider-electric.com/educationalequipments
TSX Micro on support with sockets
www.schneider-electric.com/educationalequipments 7/16
TSX Micro on support with sockets
8/16 www.schneider-electric.com/educationalequipments
TSX Micro on support with sockets
www.schneider-electric.com/educationalequipments 9/16
TSX Micro on support with sockets
10/16 www.schneider-electric.com/educationalequipments
TSX Micro on support with sockets
www.schneider-electric.com/educationalequipments 11/16
TSX Micro on support with sockets
12/16 www.schneider-electric.com/educationalequipments
TSX Micro on support with sockets
www.schneider-electric.com/educationalequipments 13/16
TSX Micro on support with sockets
14/16 www.schneider-electric.com/educationalequipments
TSX Micro on support with sockets
Programming software for TSX Micro in language "Ladder, Litteral and Grafcet" with its
cable:
3.3 Documentation
www.schneider-electric.com/educationalequipments 15/16
TSX Micro on support with sockets
4. Contact details
http://www.schneider-electric.com/educationalequipments
e-mail: FR-didactic@fr.schneider-electric.com
16/16 www.schneider-electric.com/educationalequipments