Professional Documents
Culture Documents
Ardi, H.N., Triwulan, dan J.J. Ekaputri, 2013, “Pasta Geopolimer Ringan Berserat
Berbahan Dasar Lumpur Sidoarjo Bakar dan Fly ash Perbandingan 1:3
dengan Pengebangan Foam”, Jurnal Teknik POMITS, 1-6, 112-013
Cheng TW, Chiu JP, 2003, “Fire-resistant geopolymer produced by granulated blast
furnace slag”. Min. Eng, 2003, 16(3), 205-10.
Comrie DC, Paterson JH, Itchey DJ,1988, “Geopolymer technologies in toxic waste
management”. The geopolymer ’88, First European Conference on Soft
Mineralugy. Compeigne, France.
Chandara, C., Sakai, E., Azizli, K.A.M., Ahmad, Z.A., and Hashim, S.F.S, 2010,
“The effect of unburned carbon in palm oil fuel ash on fluidity of cement
pastes containing superplastizer”, Construction and Building Materials 24:
1590-1593.
Chandara, C., Azizli, K.A.M., Ahmad, Z.A., and Hashim, S.F.S., and Sakai, E,
2012, “Heat of hydration of blended cement containing treated ground palm
oil fuel ash”, Construction and Building Materials.,27: 78-81.
Fan F., Z. Liu, G, Xu dkk, 2017, “Mechanical and Thermal Properties of Fly Ash
Base Geopolymers”, Constructions and Building Materials,1-16, 160-668
Johari, M.A.M., Zeyad, A.M., “Bunnori, N.M., Ariffin, K., 2012, Engineering and
transport properties of high-strength green concrete containing high volume
of ultrafine palm oil fuel ash”, Construction and Building Materials 30: 281-
288.
Kaur, M., 2017, “Synthesis Of Fly Ash Based Geopolymer Mortar Considering
Different Concentrations And Combinations Of Alkaline Activator
Solution”,Ceramics internationals,1-8,10-071.
Kim, B., dkk, 2017, “ The Effects of Graphene Oxide Flakes on the Mechanical
Properties of Cement Mortar”, Advances in Structural Engineering and
Mechanics, 1-14, 28-2017
Malkawi, A.B., dkk, 2016,” Effect of Alkaline Solution on Properties of the HCFA
Geeopolymer Mortars”,Procedia Engineering, 1-8,710-717
Putri, T.A.,2015,” Kajian Eksperimental Kuat Tekan Mortar Yang Mengandung Air
Laut Dan NaCl”,,halaman 1, Skripsi, Universitas Hasanudin Makasar.
Putri, W.A., 2016, “ Kharacteristik Mortar Geopolimer Abu Sawit dengan Variasi
Modulus Aktivatior”, halaman 5, Skripsi, Universitas Riau
Ranjbar N., dkk, 2014, “Compressive Strength and Microsructural Analysis of Fly
ash/Palm Oil Fuel ash Based Geopolymer Mortar”, Material & Design,1-
27,026-130
Ramujee K., 2016, “ Strength and Setting times of F-Type Fly Ash- Based
Geopolymer Mortar”, International Journal of Earth Science and
Engineering,1-6,360-365
Rusli, M.E., 2010, “Performance of Concrete by Using Palm Oil Fuel ash (POFA)
as A Cement Replacement Material”, halaman 1-25, Tesis, Universiti
Malysia Pahang
Saafi, M., L. Tang, J. Fung, M. Rahman dan J. Liggat, 2014, “Enchanced Properties
of Graphene/Fly Ash Geopolimeric Composite Cement“, Cement and
Concrete Research, 2, 292-299
Suryadiputra, N.N., dkk, 2005, “Panduan Penyekat Parit dan Saluran di Lahan
Gambut Bersama Masyarakat”, edisi 1, halaman 11, Wetlands
International, Bogor
SNI, 2014, “Spesifikasi Mortar untuk Pekerjaan Unit Pasangan”, edisi 1, halaman
1-48, BSN, Jakarta
Sooraj V.M., 2013, “Effect of Palm Oil Fuel Ash (POFA) on Strength Poperties of
Concrete”, International Journal of Scientific and Publications, 1-7, 2250-
3153
Tuyan, M., 2017, “ Effect Of Alkali Activator Concentration And Curing Condition
On Strength And Microstructure Of Waste Clay Brick Powder-Based
Geopolymer”,Composites,1-59, 328-128
Van Jaarsveld JGS, van Deventer JSJ, Lukey GC, 2002, “The effect of composition
and temperature on the properties of fly ash-and kaolinitebased
geopolymers”, Chem. Eng. J, 2002,(89),63-73.
Van Jaarsveld JGS, van Deventer JSJ, Lukey GC,2003, “The characterization of
source materials in fly ashed-geopolymers”, Mat. Lett, 57(7), 1272-80.
Varrla, E., dkk, 2014, “Turbulance- Assited Shear Exfoliation Of Graphene Using
Houshold Detergent And A Kitchen Blender”, Nanoscale, 1-102,190-822
Wang, B., R. Jiang., dan Z. Wu, “Investigation of The Mechanical Properties and
Microstructure of Graphene Nanopletelet – Cement Composite,
Nanomaterials, 1-15, 611-200
Yan S., P. Peigang ., dkk, 2015, “In Situ Fabricatioon and Characterization of
Graphene/Geopolymer Composites”, Ceramic Internationals,1-28,010-016
Zarina Y., A.M Bakri, H. Kamarudin, dkk, 2012, ” Review on the Various Ash
From Palm Oil Waste As Geopolymer Material”, Advance Master
Science,1-7, 343-743