Professional Documents
Culture Documents
PDS Limcon LTR EN LR PDF
PDS Limcon LTR EN LR PDF
Limcon
Powerful Steel Connection Design Software
Interactive Design
All connection information is shown on screen in the style of a connection
engineering drawing, allowing for easy review of the design information.
Connections can be proportioned automatically based on input loads and
governing code provisions. Users can easily override the program selected design
at any time by specifying specific connection details, including member sizes,
plates, and bolts.
Reporting Results
Limcon produces concise calculation summaries, reporting results for all relevant
limit states. Connection drawings can be produced in CAD format directly from the
design environment. A navigable 3D view of the as-designed connection geometry
can be reviewed. Three-dimensional view of haunch end plate connection.
System Requirements Limcon At-A-Glance
Processor
Intel Pentium or AMD processor 2.0 Connection Types and Geometry • Bracing members may be single or double angle, rod,
GHz or greater • Simple shear connections including: flattened CHS, hollow section with cleat or tee plate, or
»» Web side plate rolled section
Operating System
Windows XP or later »» Flexible end plate Design
»» Angle cleat • Implementation of the following design standards:
System memory
Minimum of 512 MB of RAM, 2 GB
»» Bolted angle seat »» AS 4100-1998
recommended »» Welded angle seat »» NZS 3404:Part 1:1997
»» Bearing pad »» ANSI/AISC 360
Disk Space
Minimum 500 MB free space required • Moment connections including: »» CAN/CSA-S16
»» Welded beam/column »» BS 5950-1:2000
Display
»» Bolted moment end plate »» BS EN 1993-1-8:2005
Graphics card and monitor with
1280x1024 resolution, 256 color display »» Haunched beam end plate • Both auto-design and design-check capabilities
(16-bit high color recommended) »» Flush moment end plate • Support for designing one connection at a time or several
»» Extended moment end plate at once
»» Welded flange plate
Results and Output
»» Bolted flange plate
Find out about Bentley • Bracing connections including:
• On-screen verification of connection results
at: www.bentley.com »» Single brace
• Concise design report summarizing all checks and
connection status
Contact Bentley »» KT gusset plate
• 3D realistic views
1-800-BENTLEY (1-800-236-8539) »» Uniform force bracing connection
• DXF drawing generation
Outside the US +1 610-458-5000 • Hollow structural section (HSS) connections including:
• DXF export to CAD
Global Office Listings »» HSS cap plate
www.bentley.com/contact »» HSS mitred knee
»» HSS Y/T, X, K/N gap, and K/N overlap Analysis of
stiffener seats, bolt groups, and weld groups
CAD drawing produced directly from design results. An example of the connections available in the
Limcon connection library.
© 2014 Bentley Systems, Incorporated. Bentley, the “B” Bentley logo, and Limcon are either registered or unregistered trademarks or service marks of Bentley Sys-
tems, Incorporated or one of its direct or indirect wholly owned subsidiaries. Other brands and product names are trademarks of their respective owners. 7898 07/14