Professional Documents
Culture Documents
Assembly of model
Manufacturing of cabinet with
insulation of wood sheet foam,
airfoil tape & plastic sheet. After
manufacturing cabinet attach fins,
module and fan assembly to the
cabinet through nut and bolt.
Fit module in between two fins with
help of thermal resisting grease.
After that fan is bolted from both
sides of fins at some distance to get
proper air circulation.
In such way that three assemblies are
prepare and attach those assemblies
in the cabinet in such a way that one
side of fan and fin assembly inside
the cabinet and another side of same
assembly outside the cabinet which
gives cooling effect inside the
cabinet & hotter effect outside the
cabinet assembly.
We are attaching stabilizer to the
cabinet through bolts. Stabilizer is
used to supply DC Current to the
three assemblies. One blower
connection also provide on stabilizer
separately.
ICEM,Pune Page 2