Professional Documents
Culture Documents
2. Work to do on 11/7/2018
case 56027 (2h) - Raft design: Stay at 90% and will not continue
case 53220 (2h) - New load combination for punching slab checking
case 55983 (2h) - Beam critical region: Dimension
case 56001 (2h) - Beam critical region: Update Tabulated Report for Shear
2. Work to do on 12/7/2018
case 56043 (4h) - BS VS EC Column Moments
case 56046 (2h) - Raft design result not updated
case 56032 (2h) - Internal Error in Design Slab
case 56001 - Beam critical region: Update Tabulated Report for Shear
2. Work to do on 13/7/2018
case 56043 (2h) - BS VS EC Column Moments - check the minimum k factor
case 56001 (2h) - Beam critical region: Update Tabulated Report for Shear
case 55514 (2h) - DCH Detailing: Column passed but shown as failed
case 55511 (2h) - DCM Detailing: Column summary report error
2. Work to do on 16/7/2018
case 55193 (4h): Detailing option for DCM and DCH (beam & column ONLY)
Study on the moment capacity check (2h)
case 56086 (2h): 3D Raft/TransferSlab Contour Steel Area Band Strip Cut for Design
2. Work to do on 17/7/2018
case 56043 (6h): BS VS EC Column Moments - Explore the beta calculation
case 56035 (2h): Esteem.Tests.BatchProcess unit test fails - revised the beam
torsion design for EC2
case 56114 (2h): Pile footing report: Check for pile load
case 56085 (2h): 2D Slab Contour Steel Area Band Strip Cut for Design : study the
implementation for the design
2. Work to do on 18/7/2018
case 56139 (2h): Esteem.Tests.CodeCommon unit test fails - due to relative stiffnes
set to 0.4
case 56114 (2h): Pile footing report: Check for pile load - output checking
case 56132 (2h): Beam shear and torsion failed: Section near column support -
result checking
case 56134 (2h): Unable to re-open Raft design result - file saving problem
case 55193 (2h): Detailing option for DCM and DCH (beam & column ONLY) - critical
region dimension issue
2. Work to do on 19/7/2018
case 56043 (2h): BS VS EC Column Moments - follow up
case 55193 (4h): Detailing option for DCM and DCH (beam & column ONLY)
case 52028 (2h): Custom Parameter setting: Beam cover - updated the code
2. Work to do on 20/7/2018
case 56172 (2h): Raft not design
case 56023 (4h): Parameter usage of TBeamEffect and BeamStiffInc
case 56176 (2h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 23/7/2018
case 55193 (3h): Detailing option for DCM and DCH (beam & column ONLY)
case 56147 (1h): Top element stiffness calculation for wall - BS 8110
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 24/7/2018
case 51101 (2h): Column Design Report for DCM Selected - Exception thrown when open
column full report
case 56023 (2h): Parameter usage of TBeamEffect and BeamStiffInc - check the Ec
usage
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour -
create a button and create data class to keep the As value
2. Work to do on 26/7/2018
case 56176 (7h): Raft, slab, flat slab Detailing based on Steel area contour
case 56230 (1h): Seismic EC8: capacity check (for checking purpose) - study the
specification
2. Work to do on 27//2018
case 54573 (2h): Pad footing detailing comments from Ir Anthony
case 54618 (2h): Revise flexural shear check for pile cap design
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 30//2018
case 53068 (2h): Raft Punching Shear Design for Floor based slab - result
verification
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour -
create the raftslab span class
2. Work to do on 31/7/2018
case 53068 (1h): Raft Punching Shear Design for Floor based slab - result
verification - done
case 56254 (2h): Critical region detailing not shown - fixed
case 56147 (1h): Top element stiffness calculation for wall - fixed
case 56176 (6h): Raft, slab, flat slab Detailing based on Steel area contour -
create the raftslab span class
2. Work to do on 1/8/2018
case 56176 (8h): Raft, slab, flat slab Detailing based on Steel area contour -
create the raftslab span class
2. Work to do on 2/8/2018
case 56176 (8h): Raft, slab, flat slab Detailing based on Steel area contour -
create the raftslab span class
2. Work to do on 3/8/2018
case 56175 (2h): Column drop profile overlap with beam
case 56176 (6h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 6/8/2018
case 56175 (4h): Column drop profile overlap with beam
case 56172 (2h): Raft not design
case 56176 (2h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 8/8/2018
case 56350 (6h): study on flat slab design
case 56230 (2h): Seismic EC8: capacity check (for checking purpose)