Professional Documents
Culture Documents
Test Paper
Test Paper
1) List three units which are commonly used to define the frequency of a
vibration.
5) Phase angle measured from the keyphasor event to the first positive peak
of the waveform is called _______________.
8) Define Orbit.
a) 1X
b) 2X
c) 3X
d) None of the above
14) What is the dominant frequency in radial & axial direction, if the shaft is
bent near the center?
15) What are the different types of Soft Foot or Loose Machine Feet?
18) During partial rub, continuous change of phase can be greater than
_______ degrees.
a) 90 degrees
b) 180 degrees
c) 360 degrees
d) None of the above
19) During rub contact, stiffness;
a) Increases
b) Decreases
c) Remains Constant
21)Consider a single stage gear system. It has 25 teeth on the drive gear that
rotates at 1750 RPM. The driven gear has 17 teeth.