Professional Documents
Culture Documents
The distance measured along the circumference of the pitch circle from a point on one
tooth to the same point on the adjacent tooth is called ________________
a) circular pitch
b) line of centers
c) pitch diameter
d) pitch point
3. The distance travelled by a point on either pitch circle of the two wheels during the period
of contact of a pair of teeth is called ____________________
a) angle of action
b) path of contact
c) arc of contact
d) contact ratio
5. In a multi plate clutch, T = 150 N-m, n = 4, µ = 0.3 and R = 0.1 m. Find the axial thrust.
a) 1800
b) 1250
c) 200
d) 18
6. For a Whitworth quick return motion mechanism β = 110°. Find the ratio of time of cutting
stroke to time of return stroke.
a) 0.42
b) 0.44
c) 2.27
d) 2.37
8. Which of the following expression is not correct for designing a shaft according to rigidity?
a) T = GθJ / L
b) J = TL / Gθ
c) θ = TL / GJ
d) L = GθT / J
9. When the pitch angle is greater than 90⁰, it is called external bevel gear.
a) True
b) Internal
c) Helical
d) Herringbone
10. The following is a work cycle graph for a flywheel. T₂ is the torque supplied by motor while
T₁ and T₃ are the torques required by machine. The flywheel is accelerated during the
a) AB
b) BC
c) CD
d) Both AB and CD
11. In design of wire ropes, bending stress is converted into an equivalent bending load which
is given by [d= diameter of individual wire and D= diameter of sheave].
a) AEd/D
b) 2AEd/D
c) AEd/2D
d) None of the listed
18. Using the Taylor Equation for tool life and letting n = 0.5 and C = 120, calculate the
percentage increase in tool life when the cutting speed is reduced by 50%.
a) 100%
b) 200%
c) 300%
d) 400%