Professional Documents
Culture Documents
Construction of the National The construction investor was the bonded slab PT system in flat
Technical Library began in autumn State Technical Library and Sekyra ducting, with passive H 6-4
2006. The Library is situated on the Group a.s. and the contractor was a anchorages. The PT tendons provide
college campus in the Dejvice district consortium of Metrostav a.s. and strong reinforcement of the slab,
of Prague and includes the OHL ŽS a.s.. The works including while in the column strips there are
collections of the State Technical the subterranean support structure typically 11 tendons at 400mm
Library as well as part of the Czech were designed by Helika a.s. and the spacing. In specific cases, this
Technical University libraries and the support structure's overground spacing is reduced to half in one
central library of the faculty of section was designed by PPP, s.r.o.. direction. The plate strips are
chemistry and technology. The post-tensioning system was reinforced with PT tendons with a
The National Technical Library's supplied by VSL Systems (CZ), typical axis spacing of 1,500mm. A
project scope, construction time s.r.o.. total of approximately 300t of
constraints, prestige and social prestressing steel, 63km of steel
importance created challenges for all The typical 15m by 15m spacing of ducts and 2,200 active and passive
the parties involved. the supports and the high imposed
loads led to the design of a two-way
floor system. For the project's
Scope of works performed overground storeys, the 300mm flat
slab is supported by columns topped
• Design support during the by 6m-diameter rounded shallow
application of the VSL cones. The building has a square
prestressing system footprint with smoothly-rounded
• Tendon Placing sides and corners. It measures
• Tensioning and grouting the nearly 75m by 75m.
tendons Post-tensioning of the support
ID XXXX
DATE
June to December 2007
www.vsl.com