Professional Documents
Culture Documents
SECTION
VENTILATION SYSTEM
VTL B
E
CONTENTS
PRECAUTION ............................................... 2 CENTER VENTILATOR DUCT ................................... 9 F
CENTER VENTILATOR DUCT : Removal and In-
PRECAUTIONS ................................................... 2 stallation ..................................................................10
Precaution for Supplemental Restraint System G
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- SIDE VENTILATOR DUCT ........................................10
SIONER" ................................................................... 2 SIDE VENTILATOR DUCT : Removal and Instal-
lation ........................................................................10
PREPARATION ............................................ 3 H
REAR HEATER DUCT 1 ............................................10
PREPARATION ................................................... 3 REAR HEATER DUCT 1 : Removal and Installa-
Commercial Service Tool .......................................... 3 tion ...........................................................................10
VTL
SYSTEM DESCRIPTION .............................. 4 REAR HEATER DUCT 2 ............................................11
REAR HEATER DUCT 2 : Removal and Installa-
VENTILATION SYSTEM ..................................... 4 tion ...........................................................................11 J
System Description ................................................... 4
REAR HEATER DUCT 3 ............................................11
REMOVAL AND INSTALLATION ................ 6 REAR HEATER DUCT 3 : Removal and Installa-
tion ...........................................................................11 K
DUCT AND GRILLE ............................................ 6
Exploded View .......................................................... 6 FOOT DUCT ...............................................................12
FOOT DUCT : Removal and Installation .................12 L
CENTER VENTILATOR GRILLE ................................ 7
CENTER VENTILATOR GRILLE : Removal and BLOWER MOTOR ............................................ 13
Installation ................................................................. 7 Exploded View .........................................................13
Removal and Installation .........................................13 M
SIDE DEFROSTER NOZZLE ...................................... 8
SIDE DEFROSTER NOZZLE : Removal and In- IN-CABIN MICROFILTER ................................. 15
stallation .................................................................... 8 Exploded View .........................................................15
N
Removal and Installation .........................................15
SIDE VENTILATOR GRILLE ....................................... 8 Replacement ...........................................................15
SIDE VENTILATOR GRILLE : Removal and In-
stallation .................................................................... 8 SERVICE DATA AND SPECIFICATIONS O
(SDS) ............................................................ 16
SIDE DEFROSTER GRILLE ....................................... 9
SIDE DEFROSTER GRILLE : Removal and In- SERVICE DATA AND SPECIFICATIONS
stallation .................................................................... 9 P
(SDS) ................................................................. 16
FRONT DEFROSTER NOZZLE .................................. 9 In-cabin microfilter ...................................................16
FRONT DEFROSTER NOZZLE : Removal and In-
stallation .................................................................... 9
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
D
Remover tool Remove clips, pawls, and metal clips
E
JMKIA3050ZZ
VTL
OUTLINE
Ventilation system is controlled by A/C auto amp. (AUTOMATIC AIR CONDITIONING) or A/C control (MAN-
UAL AIR CONDITIONING). For details of air conditioner system, refer to HAC-11, "System Description"
(AUTOMATIC AIR CONDITIONING), HAC-99, "System Description" (MANUAL AIR CONDITIONING).
AIR FLOW
Front
JMIIA1224ZZ
Rear
JMIIA0870ZZ
× × × × —
— × × × ×
— × × × ×
— × — — ×
AIR OUTRET A
MODE/DEF position in-
Ventilator
dication Foot (3) Defroster (4)
Center (1) Side (2)
B
× × — —
× × × —
— × × × C
— × × ×
— × — × D
VTL
FRONT
JMIIA1040ZZ
REAR
VTL
JMIIA0838ZZ
1. A/C unit assembly 2. Rear heater duct 1 LH* 3. Rear heater duct 2 LH*
J
4. Rear heater duct 3 LH* 5. Rear heater duct 1 RH* 6. Rear heater duct 2 RH*
7. Rear heater duct 3 RH*
: Pawl
K
*: Models for Canada only
CENTER VENTILATOR GRILLE
L
CENTER VENTILATOR GRILLE : Removal and Installation INFOID:0000000007580066
REMOVAL M
1. Remove cluster lid C. Refer to IP-12, "Removal and Installation".
2. Remove fixing screws (A).
N
JMIIA0839ZZ
JMIIA0840ZZ
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER NOZZLE
SIDE DEFROSTER NOZZLE : Removal and Installation INFOID:0000000007580067
REMOVAL
Driver Side
1. Remove instrument panel assembly. Refer to IP-12, "Removal and Installation".
2. Remove fixing screws (A), and then remove side defroster noz-
zle.
JMIIA1042ZZ
Passenger Side
1. Remove instrument panel assembly. Refer to IP-12, "Removal and Installation".
2. Remove fixing screws (A), and then remove instrument panel
bracket (1).
3. Remove fixing screw (B), and then remove side defroster nozzle
(2).
JMIIA1041ZZ
INSTALLATION
Install in the reverse order of removal.
SIDE VENTILATOR GRILLE
SIDE VENTILATOR GRILLE : Removal and Installation INFOID:0000000007580068
REMOVAL
1. Remove instrument panel assembly. Refer to IP-12, "Removal and Installation".
JMIIA0845ZZ
D
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER GRILLE E
SIDE DEFROSTER GRILLE : Removal and Installation INFOID:0000000007580069
REMOVAL F
1. Remove instrument panel assembly. Refer to IP-12, "Removal and Installation".
2. Remove side defroster nozzle. Refer to VTL-8, "SIDE DEFROSTER NOZZLE : Removal and Installation".
G
3. Remove fixing screw (A) and disengage fixing pawl (B), and
then remove side defroster grille.
H
VTL
J
JMIIA0846ZZ
INSTALLATION
Install in the reverse order of removal. K
FRONT DEFROSTER NOZZLE
FRONT DEFROSTER NOZZLE : Removal and Installation INFOID:0000000007580070
L
REMOVAL
1. Remove instrument panel assembly. Refer to IP-12, "Removal and Installation". M
2. Remove side defroster nozzle. Refer to VTL-8, "SIDE DEFROSTER NOZZLE : Removal and Installation".
3. Remove fixing screw (A), and then remove front defroster noz-
zle. N
JMIIA0843ZZ
INSTALLATION
Install in the reverse order of removal.
CENTER VENTILATOR DUCT
REMOVAL
1. Remove instrument panel assembly. Refer to IP-12, "Removal and Installation".
2. Remove side defroster nozzle LH and RH. Refer to VTL-8, "SIDE DEFROSTER NOZZLE : Removal and
Installation".
3. Remove front defroster nozzle. Refer to VTL-9, "FRONT DEFROSTER NOZZLE : Removal and Installa-
tion".
4. Remove fixing screws (A), and then remove center ventilator
duct.
JMIIA1043ZZ
INSTALLATION
Install in the reverse order of removal.
SIDE VENTILATOR DUCT
SIDE VENTILATOR DUCT : Removal and Installation INFOID:0000000007580072
REMOVAL
1. Remove instrument panel assembly. Refer to IP-12, "Removal and Installation".
2. Remove fixing screws (A), and then remove side ventilator duct.
JMIIA0847ZZ
INSTALLATION
Install in the reverse order of removal.
REAR HEATER DUCT 1
REAR HEATER DUCT 1 : Removal and Installation INFOID:0000000007580073
REMOVAL
1. Remove center console assembly. Refer to IP-22, "Removal and Installation".
: Pawl
B
JMIIA0848ZZ
D
INSTALLATION
Install in the reverse order of removal.
REAR HEATER DUCT 2 E
REAR HEATER DUCT 2 : Removal and Installation INFOID:0000000007580074
REMOVAL F
1. Remove center console assembly. Refer to IP-22, "Removal and Installation".
2. Remove front seat assmbly. Refer to SE-18, "Removal and Installation".
G
3. Remove front kicking plate inner and rear kicking plate inner. Refer to INT-18, "KICKING PLATE INNER :
Removal and Installation".
4. Remove center pillar lower garnish. Refer to INT-21, "CENTER PILLAR LOWER GARNISH : Removal H
and Installation".
5. Remove dash side finisher. Refer to INT-20, "DASH SIDE FINISHER : Removal and Installation".
6. Remove rear heater duct 2. (Models for Canada only) VTL
• Peel off floor carpet (1).
• Remove rear heater duct 3 (2) from rear heater duct 2 (3).
: Vehicle front J
JMIIA0849ZZ L
• Remove front floor spacer, and then remove rear heater duct 2
(2) from rear heater duct 1 (1).
M
: Vehicle front
JMIIA0850ZZ
INSTALLATION P
Install in the reverse order of removal.
REAR HEATER DUCT 3
REAR HEATER DUCT 3 : Removal and Installation INFOID:0000000007580075
REMOVAL
: Vehicle front
JMIIA0849ZZ
INSTALLATION
Install in the reverse order of removal.
FOOT DUCT
FOOT DUCT : Removal and Installation INFOID:0000000007580076
REMOVAL
Driver Side
1. Remove instrument lower panel LH. Refer to IP-12, "Removal and Installation".
2. Disconnect harness connector.
3. Remove harness connector fixing clamp.
4. Remove fixing screws, and then remove foot duct LH.
Passenger Side
1. Remove glove box assembly. Refer to IP-12, "Removal and Installation".
2. Remove fixing screws, and then remove foot duct RH.
INSTALLATION
Install in the reverse order of removal.
JPIIA1549ZZ
H
1. A/C unit assembly 2. Blower fan resistor*1 3. Sub harness*1
4. Power transistor*2 5. Sub harness*2 6. Blower motor
JMIIA1044ZZ
P
3. Remove front passenger air bag module. Refer to SR-16, "Removal and Installation".
JPIIA1692ZZ
G
JPIIA1679ZZ
REMOVAL VTL
1. Remove glove box assembly. Refer to IP-12, "Removal and Installation".
2. Remove filter cover (1), and then remove in-cabin microfilter (2).
CAUTION: J
If the filter is deformed/damaged when removing, replace it
with a new one. Deformed/damaged filter may deteriorate
the dust collecting performance. K
JPIIA1683ZZ
M
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
When installing, handle the filter with extreme care to avoid deforming/damaging. N
Replacement INFOID:0000000007580081
O
Replace In-cabin microfilter.
Refer to VTL-16, "In-cabin microfilter".