Professional Documents
Culture Documents
xls
Program to calculate critical shaft speeds (e.g., for leadscrews supported at both
ends)
By Alex Slocum, last modified 19/05/02 by Alex Slocum
Enter numbers in BOLD, results in RED
Be consistant with units! (in, lb or N, m or N, mm)
Leadscrew
Travel length L (m, mm) 1 1000
root diameter dr (m, mm) 0.013 13
outer diameter do (m, mm) 0.015 15
density rho (kg/m^3) 7900
Modulus E (M/m^2) 2.00E+11
Area A 0.0001767146 based on OD
Inertia I (m^4) 1.40198480904966E-09 based on root D
linc 0.0417
Shaft support K 3.142
Unsupported shaft length (m) Position/L(m) Critical Speed (rp wn (rad/sec) Travel (m)
1.00 0.00 1336 140 0.0000
0.96 0.04 1455 152 0.0417 6000
0.92 0.08 1590 167 0.0833
0.88 0.13 1745 183 0.1250
0.83 0.17 1924 201 0.1667 5000
0.79 0.21 2132 223 0.2083
0.75 0.25 2375 249 0.2500
0.71 0.29 2663 279 0.2917 4000
5000
4000
Critical Speed (rpm)
3000
2000
1000
0
0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00