Professional Documents
Culture Documents
Table Form of DCP Test ERA
Table Form of DCP Test ERA
Chainage No. of Blows Total Blows Reading DCP zero Thickness/Blo No. of Total Blows Reading DCP zero Thickness/B No. of Total Blows Reading DCP zero Thickness/
(mm) reading w (mm) Blows (mm) reading low (mm) Blows (mm) reading Blow (mm)
(mm) (mm) (mm)
Surface Type Penetration mm/blow Result Status Corresponding CBR, % Corresponding Density, % Remark
Gravel Up to 3 Very good >80 >95
The penetration and Result values
from 3 to 9 good 30-50 90-95 based on field experience.
more than 9 bad <30 <90
Subgrade soil up to 9 Very good up to 30 >95
DCP-CBR Relationship is taken from
from 9 to 25 good >10<30 90-95
TRL-Dynamic Cone Penetrometre.
more than 25 bad <10 <90
Job Tested:
Type of Test done: In-Situ CBR test by Dynamic Cone Penetrometer(DCP), TRL Method
Test Data Sheet
Station/Chainage: Station/Chainage:
1 100.0 10.00 26
1 125.0 25.00 10
1 160.0 35.00 7
1 180.0 20.00 13
200.0 20.00 13
250.0 50.00 5
300.0 50.00 5
360.0 60.00 4
400.0 40.00 6
500.0 100.00 2
600.0 100.00 2
For the full depth In-Situ CBR is For the full depth In-Situ CBR is
00 22 44 66 88 10
10 12
12
00
Penetration mm
Penetration mm
22
44
66
44
66
88
10
10
12
12
1.975683 10
2.4246
Dynamic Cone Penetrometer (DCP)
Job Tested: Test Date:
Type of Test done: In-Situ CBR test by Dynamic Cone Penetrometer(DCP), TRL Method
Road Name:
Station/Chainage: Station/Chainage:
DCP PLotting
No. of blows
0 2 4 6 8 10 12
0
Sample from Pk
DCP PLotting
171+200
No. of blows
RN5 , Contract 5B
0 2 4 6 8 10 12
0
2
Penetration mm
10
12