Professional Documents
Culture Documents
Refrigeration Parts
Refrigeration Parts
c o m
w w w. n a t r o n e q u i p m e n t s . c o m
R
Made of high-quality aluminum body and thin electrical steel sheet motor, the product is resistant to corrosion, high temperatures,
moisture and external factors like contamination and oils.
Self-lubricating motor bearings provide a silent and long-life performance. Can be operated at desired position.
Motor included in Class-I protection class.
Motor included in B insulation class.
All products are manufactured in accordance with the EN 60034-1, Low Voltage Equipment [2006/95/EC] and Electromagnetic
Compatibility [2004/108/EC] norms.
Custom manufacturing with desired technical features is possible.
Motor can be produced sintered bushing or ball bearing upon request customer.
Approval
Certification
Approval
Certification
Approval
Certification
Approval
Certification
Approval
Certification
Approval
Certification
Resistant to corrosion, high temperatures and other harsh conditions thanks to the body made of high-quality galvanized steel sheet
and the impeller made of aluminum.
Light weight, high air flow and low noise level thanks to the forward inclined, aluminum impeller design with thin blades (Ø60 mm).
Generating minimum level of vibration, the product successfully passed dynamic and static balance tests performed in compliance
with the ISO 1940 standard, and able to maintain the same amount of air flow during operation.
The product is custom designed for our customers with a speed range between 1300 and 2200 rpm and desired motor and power
input terminal positions.
Self-lubricating motor bearings and flexible silicone housing of the fan provide a silent and long-life performance.
All products are manufactured in accordance with the EN 60335-2-80, Low Voltage Equipment [2006/95/EC] and Electromagnetic
Compatibility [2004/108/EC] norms.
Resistant to corrosion, high temperatures and other harsh conditions thanks to the body made of high-quality galvanized steel sheet
and the impeller made of aluminum.
Light weight, high air flow and low noise level thanks to the forward inclined, aluminum impeller design with thin blades (Ø60 mm).
Generating minimum level of vibration, the product successfully passed dynamic and static balance tests performed in compliance
with the ISO 1940 standard, and able to maintain the same amount of air flow during operation.
The product is custom designed for our customers with a speed range between 1300 and 2200 rpm and desired motor and power
input terminal positions.
Self-lubricating motor bearings and flexible silicone housing of the fan provide a silent and long-life performance.
All products are manufactured in accordance with the EN 60335-2-80, Low Voltage Equipment [2006/95/EC] and Electromagnetic
Compatibility [2004/108/EC] norms.
Applied on our product which is produced from galvanized steel sheet due to electrostatic paint against erosion, hot and humid
environments It is resistant.
Our products are made of both metal and glass fiber reinforced plastic with two different types of propellers.
Our product has minimum vibration level and ISO 1940 dynamic and static balance tests made according to successfully passed.
On the rear side, protection against external factors is ensured by chrome-plated wire mesh protection.
Optimum body and propeller design with the same flow rate when the overpressure is obtained and the sound level is at the
lowest level It was reduced.
Thanks to the external rotor motor, low energy consumption and high efficiency have been achieved.
The roller bearing bearings provide quiet and long lasting performance without maintenance.
The motor is included in the IP44 protection class and F insulation class.
Our products are EN 60335-2-80, Low Voltage Equipment [2006/95 / EC] and In accordance with Electromagnetic Compatibility
2004/108 / EC] norms It is produced.
TYPE YZ5-13-00
VOLTAGE V 220-240 110-120
FREQUENCY Hz 50/60 60
RATED INPUT W 33 33
OUTPUT W 5 5
RATED CURRENT A 0.21 0.55
RATED SPEED r/min 1300 1550
FAN BLADE mm ¢200
WEIGHT kg 0.8
LICENSE CE VDE CCC UL
MOTOR ACCESSORIES
FAN BLADE
Nespl Code: #NSSP002000
FAN BLADE
Nespl Code: #NSSP002055
MOTOR ACCESSORIES
GRID
Nespl Code: #NSSP002009
200 MM -H25 GRID - For Fan Motor
GRID
Nespl Code: #NSSP002010