Professional Documents
Culture Documents
MBrace Fibre PDF
MBrace Fibre PDF
MBrace FIBRE
Unidirectional Carbon Fibre sheeting Glass and Aramid sheeting used with resin lay up method
MBrace® Glass
• Retrofit of masonry structures vulnerable to
earthquake damage
• Colours
- Carbon Fibre – Black
- Glass – White
- Aramid – Yellow
®
MBrace FIBRE
MBrace® CF 240
Carbon Fiber Reinforcement System - High Tensile CF
Available in widths of 500mm
Technical data of fibre (unidirectional) 200g/m² 300g/m²
Modulus of elasticity 240kN/mm² 240kN/mm²
Tensile strength 3800N/mm² 3800N/mm²
Weight of C fibre (main direction) 200g/m² 300g/m²
Total weight of sheet 230g/m² 330g/m²
Density 1.7g/cm³ 1.7g/cm³
ε Ultimate % 1.55 1.55
Thickness for static design weight / density 0.117mm 0.176mm
Theor. Section for static design 1000mm width 117mm² 176mm²
Safety factor for static design (manual lamination / UDproduct) 1.2 (recommended) 1.2 (recommended)
Tensile force of 1000mm width ultimate 117 x 3800 = 370.5kN 176 x 3800 = 557.3kN
1.2 1.2
Tensile force of 1000mm width at 0.6% ε for design 140kN 211kN
MBrace® CF 240 system: These products are for professional and industrial
Width 500mm, Length 100M use only; application directions must be followed.
Precautions
READ ALL SAFETY DIRECTIONS AND
WARNINGS AND REFER TO MATERIAL SAFETY
DATA SHEET FOR HANDLING PROCEDURES.
Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or implied with
any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any labour involved in the
application are beyond our control.
As all BASF technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.