Professional Documents
Culture Documents
ISOMAT NR70
High Performance Vibration Isolation Material
FARRAT ISOMAT NR RANGE:
Increasing Acoustic Performance
Features
High resilience and high damping qualities
Low level of creep
Long working lifetime (>60 years)
Also available as neoprene CR (for enhanced chemical
resistance) and nitrile rubber BR (for further enhanced
damping).
100% recyclable
Can be supplied as full sheets, cut to size pads and strips Isomat NR70 used as Isomat NR70 used as steel
(including holes and slots if required) according to the floating floor isolators column isolation
customer’s requirements.
Full Area
Full building isolation (raft-slab)
Heavyweight partition support
Strips
Pre-cast concrete supports (e.g. corbells)
Pads
Acoustic floating floor isolators
Anti-vibration pads
Steel/timber frame isolation
Vibration isolation for machinery/plant
Isolated foundations for sensitive or high impact machinery
Density BS EN ISO 845 850 Kg/m³ Dynamic to Static Ratio 3.1 N/A
Determined using
Tensile Strength BS ISO 37:2011 23.8 N/mm² Damping Ratio, C/Cc @ fn in-house test 6.2 %
methodology.
Max Static Pressure 0.73
Elongation at Break BS ISO 37:2011 509 % Test pad dimensions: N/mm²
[Overload] [1.09]
75 x 75mm
Compression Set Max Residual Compression
ISO 815-1:2008 22 % 2.0 %
(24hrs@70°C) After Overload
Tear Resistance Standard Sheet Size +/-5% 1010x505 mm
ISO 34-1:2010 18.1 kN/m
Trouser Method A
Static Shear Modulus BS ISO 1827:2011 1.52 N/mm2 Operating Temperature N/A -30 to +60 °C
Availability
THICKNESS TREAD (Bottom/Top) STOCK
20 mm Isomat/Plain Non-Stock
25 mm Isomat/Treaded Non-Stock
37 mm Isomat/Plain Non-Stock
50 mm Isomat/Isomat Non-Stock
All information in this datasheet is for guidance only based on current knowledge and may be subject to change and correction.