Professional Documents
Culture Documents
ISOMAT NR62
High Performance Vibration Isolation Material
FARRAT ISOMAT NR RANGE:
Increasing Acoustic Performance
Why Choose Farrat Isomat NR62? NR44 NR50 NR62 NR70
Increasing Load Bearing Capacity
Farrat Isomat is a range of natural, neoprene and nitrile rubbers
moulded into innovatively designed, constant shape-factor
sheets to provide load bearing vibration isolation. It is
used regularly in both structural and industrial applications
around the world as full sheets, strips and individual pads.
Features
)) Materials tested and approved to BS 6177:1982 and
BS EN 1337-3:2005
)) Very high resilience with moderate damping qualities
)) Low level of creep
)) Long working lifetime (>60 years)
)) Also available as neoprene CR (for enhanced chemical
resistance) and nitrile rubber BR (for enhanced damping).
Can be supplied as full sheets, cut to size pads and strips Isomat NR62 used as Isomat NR62 used as
(including holes and slots if required) according to the floating floor isolators steel column isolation
customer's requirements.
Isomat NR62 site applications:
Applications
Farrat Isomat NR62 can be used in a wide range of
vibration isolation applications, such as:
Full Area
)) Full building isolation (raft-slab)
)) Heavyweight partition support
Strips
)) Light/Medium weight partition support
)) Pre-cast concrete supports
Pads
)) Acoustic floating floor isolators
)) Anti-vibration pads
)) Steel/timber frame isolation
)) Vibration isolation for machinery/plant
)) Isolated foundations for sensitive or high impact machinery
)) Floating Floors
)) Full Building Isolation
Available to download at: www.farrat.com
CHARACTERISTICS TEST STANDARD PROPERTIES UNIT CHARACTERISTICS TEST STANDARD PROPERTIES UNIT
Static Compression
Hardness BS ISO 48:2010 62 (+/- 3) IRHD Varies with load/thickness - see graphs
Modulus, Ec
Density BS EN ISO 845 800 Kg/m³ Dynamic to Static Ratio 2.3 N/A
Determined using
Tensile Strength BS ISO 37:2011 27.3 N/mm² Damping Ratio, C/Cc @ fn in-house test 4.8 %
methodology.
Max Static Pressure Test pad dimensions: 0.61
Elongation at Break BS ISO 37:2011 606 % N/mm²
[Overload] [0.92]
75 x 75mm
Compression Set Max Residual Compression
ISO 815-1:2008 25 % 2.0 %
(24hrs@70°C) After Overload
Tear Resistance
ISO 34-1:2010 16.7 kN/m Standard Sheet Size +/-5% 1010x505 mm
Trouser Method A
Static Shear Modulus BS ISO 1827:2007 1.08 N/mm2 Operating Temperature N/A -30 to +60 °C
% per
Creep ISO 8013 : 2006 2.4 Operational Life N/A 60 Years
decade
14 Availability
12 37mm THICKNESS TREAD (Bottom/Top) STOCK
20 mm Isomat/Plain Non-Stock
Deflection (mm)
10
25 mm Isomat/Treaded Stock
8 25mm
37 mm Isomat/Plain Non-Stock
6 20mm 50 mm Isomat/Isomat Stock
2
STOCK 2-3 working days
0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
NON-STOCK 2-3 working weeks
Pressure (MPa) BESPOKE 4-6 working weeks
If cutting is required add +5 days
30 30 90%
(-20dB)
28 28
26 26
Isolator Natural Frequency (Hz)
24 24
Natural Frequency (Hz)
94%
22 22
(-25dB)
20 20
18 18 97%
16 16 (-30dB)
20mm
14 14
25mm 98%
12 12 (-35dB)
37mm
10 10 99%
(- 40dB)
50mm
8 8
6 6
Data based on material damping specific,
4 4 single degree of freedom model.
2 2 Model applies to all thicknesses.
0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0 10 20 30 40 50 60 70 80 90 100
Pressure (MPa) Disturbing Frequency (Hz)
All information in this datasheet is for guidance only based on current knowledge and may be subject to change and correction.
Farrat Isolevel Ltd Balmoral Road, Altrincham, Cheshire, WA15 8HJ, England, UK
T. +44 (0) 161 924 1600 F. +44 (0) 161 924 1616
E. sales@farrat.com www.farrat.com