Professional Documents
Culture Documents
TRANSFORMER
x
the low-voltage door is opened.
Transformer tank welded from cover to base.
Tests
x Permanent nameplate.
x One-inch NPT pipe cap filling provision. Each transformer receives all standard commercial tests in accordance with
x ANSI tank ground pads. ANSI C57.12.90 (latest revision), with test reports available by serial number
of the transformer.
x One-inch drain valve and sampler.
x Automatic pressure-relief valve (35 SCFM).
x Tap changer with (2) 2.5% full capacity taps above ▶ Resistance tests of all windings ▶ Impedance and load
and below nominal. losses
▶ Ratio tests on the rated voltage
x One 10”x18” (or 14”x25”) hand hole in transformer and all tap connections ▶ Applied voltage test
tank cover. ▶ Polarity and phase relation tests ▶ Induced voltage test
Painted olive-green color (Munsell 7GY 3.29/1.5). at rated voltage
x ▶ Full-wave impulse test
Designed, manufactured and tested in accordance ▶ No load loss at rated voltage
x ▶ Mechanical leak test
with the latest ANSI standards. ▶ Exciting current at rated voltage
Configuration
INPUT ELBOWNS
LIMITER BAY-O-NET TRANSFORMER
FUSE FUSIBLE
RADIAL MODIFIED OUTPUT
PAD MOUNTED ELBOWNS OR
ELBOW
TRANSFORMER ARRESTERS
2-POSITION SWITCH
AT BT
ON-OFF
INPUT TRANSFORMER
RADIAL PAD ELBOWNS SWITCH
MOUNTED
TRANSFORMER LIMITER BAY-O-NET
FUSE FUSE AT BT
MOUNTED ELBOWNS OR
ELBOW
TRANSFORMER ARRESTERS
AT BT
3
Standard Voltages Standard Ratings
4 5 6 7 8 9
3 10
ITEM QTY PARTS
2
1 6 HV BUSHING
11
2 1 LOADBREAK SWITCH
1
3 2o4 LIFTING LUGS
4 3 BAY-O-NET FUSING
16
12
5 1 TAP CHANGER
6 1 TERMOMETER*
7 1 LIQUID LEVEL*
4 5 6 7 8 9
8 1 OIL FILLING 14 13
10 1 NAMEPLATE 10
11 4 LV BUSHING
15
12 1 DRAIN VALVE 11
13 2 LV GROUND
14 2 HV GROUND
15 1 HANDLE
16 6 PARKING STAND
12
14 13
SINGLE-PHASE
PAD MOUNTED
TRANSFORMER
NOTE: The above dimensions are approximate, at the time of purchasing the
equipment please request an update on the dimensions, as these may have varied.
7
www.datsanst.com
+90-482-215 3188
info@datsanst.com.tr