Professional Documents
Culture Documents
IT PARKS
MALLS
MULTI STOREY TOWERS
STRUCTURAL PLANING (Basics)
For this module PLANWIN / FRAMEWIN processor is used.
Advantage of using this preprocess is Work directly using Architectural Plan. Plan
structural system and arrive at member sizing.
Nowhere you have to specify.
Joint Coordinates
Member Incidence
Dead Load
Live Load
Wind Load
Seismic Load
STRUCTURAL PLANING (Slabs)
First SLABS (Rooms) are drawn using simple commands. Each slab is drawn relative to
each other like a jigsaw puzzle.
After marking of slab, COLUMN are marked. Here Auto Judge option is used.
Where by cursor moves to all possible joint.
Also it is possible to mark column relative to any joint. Thus column need not be at
corner only, can also be located easily.
STRUCTURAL PLANING (Beams)
Marking of beam is fully automatic. software finds out location of beams , Loads
are taken from Wall thickness and floor height
Initially two type of loadings are considered. Internal & External. Later on user can
change any loading.
There is provision for specifying external Points load & Wedge Load also.
LOAD TRANSFER / FLOW (Part 1)
By clicking on any beam , user can view which loads are originated from which slab, also
reaction due to secondary beams can be viewed.
LOAD TRANSFER / FLOW (Part 3)
Also software gives total summary of loads.
Acting load
Total reaction on column
There are
excellent reporting
facilities are
available , where
by complete
details like loading
diagram can be
viewed / printed
into spread sheet ,
including diagram
as shown in
adjacent figure
FrameWin Converts Levels into 3D Model
Column – Auto Sizing
After 3D Model is made, it is required to give some appropriate size for columns. For
which Auto Size option is available. By Giving Breadth, % of steel and grade software
works out column depth, based on vertical loads. It is also possible for user to give
its own column sizes.
Computing Wind Loads
Wind loads can be specified by selecting the location, or user can specify wind
speed, Risk coefficient etc. Option for specifying parapet wall height is also
available
Computing Seismic Loads
Defining Shear Walls
Export To CAD In 3D Format
Forward Integrate To Analysis Software