Professional Documents
Culture Documents
An International Code: Boiler and Pressure Vessel Code
An International Code: Boiler and Pressure Vessel Code
GO.ASME.ORG / BPVC15
FOR DETAILS, CALL 1-800-THE-ASME (1-800-843-2763) (OR) 1-973-882-1170 (OR) VISIT GO.ASME.ORG/BPVC15.
BOILERS AND
PRESSURE VESSELS
Since its first issuance in 1914,
ASME’s BPVC has pioneered modern
standards-development, maintaining a
commitment to enhance public safety
and technological advancement to meet
the needs of a changing world. This
“International Historic Mechanical
Engineering Landmark” now has been
incorporated into the laws of state and
local jurisdictions of the United States
and nine Canadian provinces.
NUCLEAR
Please note: ASME’s Boiler and Pressure
ASME has played a vital role in
Vessel Code (BPVC) begins it bi-annual
supporting the nuclear industry since its
publishing cycle with this Edition in 2015.
inception, when ASME codes, standards
User feedback was clear that assimilating
and conformity assessment programs,
all the changes every two years would
originally developed for fossil fuel-fired
spare the need for yearly changes through
plants, were applied to nuclear power-
addenda; and produce a more user-
plant construction. Its widely-adopted
friendly reference that eliminates the
BPVC Section III, Rules for Construction
need for interfiling of replacement pages.
of Nuclear Facility Components, celebrated
ASME issued its first Standard, Code for 50 years in 2013.
the Conduct of Trials of Steam Boilers, in
Presently, half of the world’s nuclear
1884. This paper evolved into Rules for the
power plants incorporate all or portions
Construction of Stationary Boilers and for
of ASME nuclear codes and standards in
Allowable Working Pressure – the first
their construction, operation, and/or
edition of ASME’s now-legendary Boiler
maintenance. Sixty nations generally
and Pressure Vessel Code (BPVC) – issued
recognize and apply the BPVC, while 30
in 1914 and published in 1915.
of the 44 nuclear nations purchase their
The BPVC has grown over the decades to nuclear components to specifications
include 31 books and 17,000 pages covering contained within ASME’s nuclear codes
industrial and residential boilers as well and standards. The nuclear sections of
as nuclear reactor components, transport the BPVC reflect the best-practices of
tanks, and other forms of pressure industry, while contributing to more
vessels. It is kept current by nearly 1,000 than a half-century of safety for the
volunteer technical experts – drawn from general public.
a balance of interests among industry,
Visit go.asme.org/BPVC15
government and R&D – who operate in a
fully open and transparent manner via
consensus process.
1
POWER BOILERS
SECTION I
POWER BOILERS
Provides requirements for all methods
of construction of power, electric, and
miniature boilers; high temperature
water boilers, heat recovery steam
generators, and certain fired pressure
vessels to be used in stationary service;
and power boilers used in locomotive,
portable, and traction service. Rules
pertaining to use of the single ASME
certification mark with the V, A, M, PP, S,
and E designators are also included. REFERENCED
BPVC SECTIONS
Seccion I – Reglas para la construccion
de calderas de energia (BPVC-I_ES – 2010). BPVC-II, A, B, C,D
Section II, Materials, Parts A through D.
BPVC-V
SECTION VII Section V, Nondestructive Examination.
CARE OF POWER BOILERS
BPVC-VIII-1
Provides guidelines to assist those
Section VIII, Rules for Construction of
directly responsible for operating,
Pressure Vessels, Division 1.
maintaining, and inspecting power
boilers. These boilers include stationary, BPVC-IX
portable, and traction type boilers, but Section IX, Welding, Brazing, and
not locomotive and high-temperature Fusing Qualifications.
water boilers, nuclear power-plant boilers
(see Section XI), heating boilers (see
Section VI), pressure vessels, or marine REFERENCED
boilers. Guidelines are also provided for ASME STANDARDS
operation of auxiliary equipment and
B1.20.1
appliances that affect the safe and
Pipe Threads, General Purpose, Inch.
reliable operation of power boilers.
Twelve Standards from the B16 Series
on pipe flanges and fittings.
B31.1
Power Piping.
B36.10M
Welded and Seamless Wrought Steel Pipe.
PTC 25
Pressure Relief Devices.
QAI-1
Qualifications for Authorized Inspection.
HEATING BOILERS
PTC 25
Pressure Relief Devices
QAI-1
Qualifications for Authorized Inspection
3
PRESSURE VESSELS
REFERENCED
BPVC SECTIONS
BPVC-II, A, B, C, D
SECTION VIII Section II, Materials, Parts A through D.
PRESSURE VESSELS
BPVC-V
Division 1 provides requirements
Section V, Nondestructive Examination.
applicable to the design, fabrication,
inspection, testing, and certification of BPVC-IX
pressure vessels operating at either Section IX, Welding, Brazing, and
internal or external pressures exceeding Fusing Qualifications.
15 psig. Such vessels may be fired or
unfired. This pressure may be obtained
from an external source or by the ASME’S PRESSURE
application of heat from a direct or TECHNOLOGY BOOKS
indirect source, or any combination
thereof. Specific requirements apply to Applicable to pressure equipment
several classes of material used in Standards.
pressure vessel construction, and also to
ASME Section VIII Division 2 Criteria and
fabrication methods such as welding,
Commentary (PTB-1 - 2014).
forging and brazing.
Guide to Life Cycle Management of
Division 1 contains mandatory and
Pressure Equipment Integrity
non-mandatory appendices detailing
(PTB-2 - 2009).
supplementary design criteria,
nondestructive examination and ASME Section VIII-Division 2 Example
inspection acceptance standards. Rules Problem Manual (PTB-3 - 2013).
pertaining to the use of the single ASME
certification mark with the U, UM and ASME Section VIII-Division 1 Example
UV designators are also included. Problem Manual (PTB-4 - 2013).
FOR DETAILS, CALL 1-800-THE-ASME (1-800-843-2763) (OR) 1-973-882-1170 (OR) VISIT GO.ASME.ORG/BPVC15.
DIVISION 2
PCC-1
Guidelines for Pressure Boundary Bolted DIVISION 3
Flange Joint Assembly. API 579-1/ASME FFS-1
PCC-2 Fitness-For-Service.
Repair of Pressure Equipment and Piping. Three Standards from the B1 Series on
PTC 25 screw threads.
Pressure Relief Devices. Four Standards from the B16 Series on
QAI-1 pipe flanges and fittings.
Qualifications for Authorized Inspection. Seven Standards from the B18 Series on
hex bolts.
B36.10M
Welded and Seamless Wrought Steel Pipe.
B46.1
Surface Texture (Surface Roughness,
Waviness and Lay).
PTC 25
Pressure Relief Devices.
QAI-1
Qualifications for Authorized Inspection.
5
PRESSURE VESSELS
SECTION XII
TRANSPORT TANKS
Provides requirements for construction
and continued service of pressure vessels
for the transportation of dangerous
goods via highway, rail, air or water at
pressures from full vacuum to 3,000 psig
and volumes greater than 120 gallons.
“Construction” is an all-inclusive term
comprising materials, design, fabrication,
examination, inspection, testing,
certification, and over-pressure protec-
tion. “Continued service” refers to
inspection, testing, repair, alteration, and
recertification of a transport tank that
has been in service. Rules pertaining
to the use of the single ASME certification
mark with the T, TD, and TV designators
are included.
REFERENCED
BPVC SECTIONS
BPVC-II, A, B, C, D
Section II, Materials, Parts A through D.
BPVC-V
Section V, Nondestructive Examination.
BPVC-VIII-1-2
Section VIII, Pressure Vessels,
Division 1 and Division 2.
BPVC-IX
Section IX, Welding, Brazing,
and Fusing Qualifications.
REFERENCED ASME
STANDARDS
B1.1
Unified Inch Screw Threads
(UN and UNR Thread Form).
B1.20.1
Pipe Threads, General Purpose, Inch.
B18.2.2
Square and Hex Nuts.
B36.10M
Welded and Seamless Wrought Steel Pipe.
PTC 25
Pressure Relief Devices.
QAI-1
Qualifications for Authorized Inspection.
FIBER-REINFORCED PLASTIC
PRESSURE VESSELS
7
CONSTRUCTION OF NUCLEAR
FACILITY COMPONENTS
DIVISION 1, SUBSECTIONS NC, ND Subsection NH addresses Class 1
components, parts, and appurtenances
Subsection NC addresses items, which are which are expected to function even
intended to conform to the requirements when metal temperatures exceed those
for Class 2 construction. covered by the rules and stress limits of
Subsection ND addresses items, which are Subsection NB and Tables 2A, 2B, and 4 of
intended to conform to the requirements Section II, Part D, Subpart 1.
for Class 3 construction. Division 2 addresses concrete
OTHER SUBSECTIONS AND DIVISIONS containment structures, pre-stressed or
reinforced. These requirements are
Subsection NE addresses items, which are applicable only to those components that
intended to conform to the requirements are designed to provide a pressure
for Class MC construction. retaining or containing barrier.
Subsection NF addresses the supports, Division 3 addresses the design and
which are intended to conform to the construction of the containment system
requirements for Classes 1, 2, 3, and MC of a nuclear spent fuel or high level
construction. radioactive waste transport packaging.
Subsection NG addresses structures, Division 5 provides construction rules for
which are designed to provide direct high-temperature reactors, including both
support or restraint of the core (fuel and high-temperature, gas-cooled reactors
SECTION III blanket assemblies) within the reactor (HTGRs) and liquid-metal reactors (LMRs).
RULES FOR CONSTRUCTION OF pressure vessel.
NUCLEAR FACILITY COMPONENTS
REFERENCED BPVC SECTIONS
Provides general requirements which
address the material, design, fabrication, BPVC-II, A, B, C, D
examination, testing and overpressure Section II, Materials, Parts A through D.
protection of the items specified within BPVC-V
each respective Subsection, assuring Section V, Nondestructive Examination.
their structural integrity.
BPVC-IX
Division 1, Subsection NCA Subsection Section IX, Welding, Brazing, and Fusing
NCA, which is referenced by and is an Qualifications.
integral part of Division 1, Subsections
NB through NG, and Division 2 of Section BPVC-XI
III, which covers quality assurance Section XI, Rules for Inservice Inspection
requirements, ASME product-certifica- of Nuclear Power Plant Components.
tion marks, and authorized inspection for
Class 1, 2, 3, MC, CS, and CC construction.
REFERENCED ASME STANDARDS
DIVISION 1, SUBSECTIONS NB, NF, APP
Three Standards from the B1 Series on
Subsection NB addresses items which are screw threads.
intended to conform to the requirements
for Class 1 construction. Eight Standards from the B16 Series on
pipe flanges and fittings.
Subsection NF addresses supports
which are intended to conform to the Three Standards from the B18 Series on
requirements for Classes 1, 2, 3, and MC hex bolts.
construction. B36.10M
Subsection APP contains appendices, Welded and Seamless Wrought Steel Pipe.
both mandatory and non-mandatory for B36.19M
Section III, Division 1 (Subsections NCA Stainless Steel Pipe.
through NG), Division 2 and Division 3,
including a listing of design and design NQA-1
analysis methods and information, plus Quality Assurance Program
Data Report Forms. These appendices are Requirements for Nuclear Facilities.
referenced by, and are an integral part of,
QAI-1
Subsections NCA through NG, Division 2
Qualifications for Authorized Inspection.
and Division 3.
FOR DETAILS, CALL 1-800-THE-ASME (1-800-843-2763) (OR) 1-973-882-1170 (OR) VISIT GO.ASME.ORG/BPVC15.
NUCLEAR INSERVICE
BPVC-IX
Section IX, Welding, Brazing, and Fusing
Qualifications.
9
SERVICE SECTIONS
SECTION II – MATERIALS
Part A covers Ferrous Material; Part B
covers Nonferrous Material; Part C
SECTION IX
covers Welding Rods, Electrodes, and
Filler Metals; and Part D covers Material Welding, Brazing, and Fusing
Properties in both Customary and Qualifications
Metric units of measure.
…Is another “service Code” – containing
Together, these four parts of Section II rules relating to the qualification of
comprise a “service Code” to other BPVC welding, brazing, and fusing procedures
Sections, providing material specifica- as required by other BPVC Sections.
tions adequate for safety in the field of It also covers rules relating to the
pressure equipment. These specifications qualification and requalification of
contain requirements for chemical and welders, brazers, and welding and brazing
mechanical properties, heat treatment, operators in order that they may
manufacture, heat and product analyses, perform welding or brazing in component
and methods of testing. Part A and Part B manufacture. Welding, brazing and
specifications are designated by SA or SB fusing data cover essential and
numbers, respectively, and are identical nonessential variables specific to the
with or similar to those of specifications welding, brazing or fusing process used.
published by ASTM and other recognized
national or international organizations.
Part C specifications are designated CODE CASES PRESSURE
by SFA numbers and are derived from TECHNOLOGY / NUCLEAR
AWS specifications.
Starting with this 2015 Edition, the
BPVC will be revised every two years. But
what happens in the interim with new
SECTION V materials or alternative constructions?
NONDESTRUCTIVE EXAMINATION How does the BPVC keep current with the
…Is another “service Code” – containing latest in technology and applications?
requirements and methods for nonde- Code Cases are approved actions by the
structive examination which are BPVC Committees on these alternatives,
referenced and required by other intended to allow early and urgent
BPVC Sections. It also includes manufac- implementation of any revised
turer’s examination responsibilities, requirements. They are issued four times
duties of authorized inspectors and per year in two categories: Boiler and
requirements for qualification of Pressure Vessels (CC-BPV) and Nuclear
personnel, inspection and examination. (CC-NUC). Users may purchase individual
Examination methods are intended to publications at any time. Or they may
detect surface and internal discontinu- subscribe to receive full sets of Code
ities in materials, welds, and fabricated Cases as they are published for the
parts and components. A glossary of duration of that BPVC edition’s cycle.
related terms is included.
This responsiveness to requests illustrates
the unique openness and transparency of
ASME’s code-development process –
striving to reflect best-practices of
industry, while contributing to safety for
the general public.
ASME’S BOILER AND PRESSURE VESSEL CODE (BPVC) 2015
11
ASME CONFORMITY
ASSESSMENT – BECAUSE
YOU HAVE HIGH STANDARDS
Currently, there are more than 7,000
ASME certificate holders in 75 countries.
As of August 2014
FOR DETAILS, CALL 1-800-THE-ASME (1-800-843-2763) (OR) 1-973-882-1170 (OR) VISIT GO.ASME.ORG/BPVC15.
NUCLEAR COMPONENT NUCLEAR MATERIAL
CERTIFICATION ORGANIZATION CERTIFICATION
Nuclear-type Certificates of The Nuclear Material Organization
Authorization issued by ASME verify the Certification Program certifies
adequacy of an organization’s quality organizations that provide materials
assurance program and allow the and services to the nuclear power
Certificate Holder to design, fabricate, and industry. The rules for this certification
install components and supports used in program were first introduced in the 1973
nuclear power plants and other nuclear Winter Addenda of the ASME BPVC for
facilities. These components will be Material Manufactures and Material
certified and stamped with the Suppliers, which currently are referred to
Certification Mark in accordance with as Material Organizations.
Section III of the ASME BPVC.
Quality System Certificates (QSC) issued
ASME issues six different N-type by ASME verify the adequacy of a
NS – Supports
N3 – Transportation containments
and storage containments
13
NQA-1 Certification Your Quality
Begins With Quality Assurance
Entering the nuclear supply chain can be “When potential clients hear
a daunting and costly task. To support that our quality assurance
the nuclear industry, ASME developed its
new NQA-1 certification program to
program has been certified by
assess and certify companies that are ASME, it’s automatic for them to
committed to understanding quality and understand what requirements
producing high-quality products and the program meets. Premier’s
services. The ASME NQA-1 certification is business opportunities have
designed to assess a supplier’s capability
in implementing a quality assurance
grown exponentially since we
program that meets the requirements of achieved our NQA-1 certification.”
the NQA-1 Standard. – Mathew Burke,
Suppliers who achieve NQA-1 Quality Assurance Manager, Premier
certification, may: Technology Inc., Blackfoot, Idaho
Visit CSTOOLS.asme.org
15
ANDE PERSONNEL
CERTIFICATION / ASME
STANDARDS TECHNOLOGY, LLC
ANDE PERSONNEL CERTIFICATION research project. Technology proponents
can be confident in the results: every
ASME has been setting the standard ASME ST LLC project goes through a
in personnel certification for over two rigorous qualification, validation, and
decades. Over 3,000 professionals in peer review process.
20 countries have achieved these
respected credentials. EXCEED RESEARCH GOALS WITH A
TEAM OF HANDS-ON INDUSTRY EXPERTS
ASME NDE (ANDE) is a certification
program for Non-Destructive ASME ST LLC approaches its projects as
Examination (NDE) personnel and well as meets client needs with the
quality control (QC) inspectors. ANDE following capabilities:
Personnel Certification includes features
• Standards and certification
consistent with other ASME Personnel
involvement in research projects helps
Certification best-practices. This program
ensure results will be relevant to
provides independent, third-party
standards committees.
centralized certification for NDE & QC
inspection personnel as an alternate • Collaborative research projects
option to the historical, employer-based minimize individual investment while
NDE & QC certification systems. It maximizing benefits.
focuses on nuclear in-service inspection
and new nuclear construction. ANDE will • International partnerships of
ultimately expand to include pressure- government, industry and academia
boundary and structural applications in help build consensus leading to
other industries throughout the globe. technically relevant standards.
FOR DETAILS, CALL 1-800-THE-ASME (1-800-843-2763) (OR) 1-973-882-1170 (OR) VISIT GO.ASME.ORG/BPVC15.
TRAINING AND
DEVELOPMENT COURSES
ASME appreciates that an organization’s “LIVE” TRAINING
most valuable asset is its workforce. As
a recognized leader in workforce learning PUBLIC LIVE COURSES
solutions for engineers and technical More than 150 courses ranging from
professionals, our goal is to help fundamental to advanced levels, led
individuals expand their knowledge by industry experts in major cities
and organizations develop their core around the world.
human assets. ASME MASTERCLASS SERIES
• More than 300 comprehensive Premium learning programs comprised
course offerings presented in of advanced topics led by recognized
multiple learning formats industry experts and aimed at
experienced engineers, emphasizing
Visit go.asme.org/TRAINING
17
BOILERS AND PRESSURE
VESSELS LEARNING MATRIX
FUNDAMENTAL INTERMEDIATE ADVANCED
BPV Code, Section I: Power Boilers (LC) PD665 BPV Code, Section VIII, Division 2: Alternative Rules BPV Code: Plant Equipment Requirements (LC)
– Design and Fabrication of Pressure Vessels (LC) PD662
BPV Code, Section VIII, Division 1: Design PD448 (Also online – EL502)
& Fabrication of Pressure Vessels (LC) PD442 Bases and Application of Heat Exchanger
(Also online – EL501) Design by Analysis Requirements in ASME Boiler Mechanical Design Rules in Section VIII of the
BOILERS AND PRESSURE VESSELS
and Pressure Vessel Code Section VIII, Division 2 Boiler and Pressure Vessel Code (MC) MC104
BPV Code, Section VIII, Division 1 Combo Course – Alternative Rules (MC) MC121
(combines PD441 and PD442) (LC) PD443 Flow Induced Vibration with Applications to Failure
Inspections, Repairs and Alterations of Pressure Analysis (LC) PD146
Pressure Relief Devices: Design, Sizing, Equipment (LC) PD441 (Also online – EL503)
Construction, Inspection & Maintenance (LC) Structural Materials and Design for Elevated to
PD583 Failure Prevention, Repair & Life Extension of High Temperatures (MC) MC112
Piping, Vessels and Tanks (LC) PD077
Non-Destructive Examination – Applying ASME Techniques and Methods Used in API 579-1/ASME
Code Requirements (BPV Code, Section V) (LC) Repair Strategies and Considerations for Pressure FFS-1 for Advanced Fitness-For-Service (FFS)
PD389 Vessels and Piping (MC) MC114 Assessments (MC) MC113
B31.1 Power Code (LC) PD013 API 579-1/ASME FFS-1 Fitness-for-Service (LC)
PD395
BPV Code, Section III, Division 1: Class 1 Failure Prevention, Repair & Life Extension of Flow Induced Vibration with Applications to Failure
Piping Design (SS) EL542 Piping, Vessels and Tanks (LC) PD077 Analysis (LC) PD146
BPV Code, Section III, Division 1: Class 2 & Repair Strategies and Considerations for Pressure Techniques and Methods Used in API 579-1/ASME
3 Piping Design (SS) EL543 Vessels and Piping (MC) MC114 FFS-1 for Advanced Fitness-For-Service (FFS)
Assessments (MC) MC113
B31 Piping Fabrication and Examination (LC) PD445 API 579-1/ASME FFS-1 Fitness-for-Service (LC)
PD395
B31.1 Power Piping Code (LC) PD013
How to Predict Thermal-Hydraulic Loads on
B31.3 Process Piping Design (LC) PD014 Pressure Vessels & Piping (LC) PD382
PIPING
B31.3 Process Piping Materials Fabrication, Seismic Design and Retrofit of Equipment and
Examination and Testing (LC) PD457 Piping (LC) PD394
B31.3 Process Piping Design, Materials,
Fabrication, Examination and Testing Combo
Course (combines PD014 and PD457) (LC) PD581
KEY FOR COURSE TYPE: LC = Live Course MC = MasterClass Series IS = Instructor-Supported eLearning SS = Self-study eLearning
NUCLEAR LEARNING MATRIX
FUNDAMENTAL INTERMEDIATE ADVANCED
BPV Code, Section III: Introduction (IS) EL509 Manufacturing, Fabrication & Examination Advanced Design & Construction of Nuclear
FACILIT Y CONSTRUCTION
Responsibilities in Codes, Standards and Facility Components per BVP Code, Section III (LC)
BVP Code, Section III, Division 1: Rules for Construction Regulations for Nuclear Power Plant Construction PD644 (Also online –EL524)
of Nuclear Facility Components (LC) PD184 (LC) PD631
Design Basis vs Beyond Design Basis
Overview of Codes & Standards in Nuclear Power BPV Code, Section III, Division 1: Class 1, 2, & 3 Considerations in Nuclear Plants (MC) MC120
Plant Construction (LC) PD633 Piping Design (LC) PD615
Structural Materials and Design for Elevated to
Design in Codes, Standards and Regulations for Design of Buried High Density Polyethylene (HDPE) High Temperatures (MC) MC112
Nuclear Power Plant Construction (LC) PD632 Piping Systems (LC) PD617 (Also online – EL544)
Techniques and Methods Used in API 579-1/ASME
FFS-1 for Advanced Fitness-For-Service (FFS)
Assessments (MC) MC113
BPV Code, Section VIII, Division 1: Design & Fabrication of Pressure Vessels (LC) Bases and Application of Heat Exchanger
PD442 (Also online – EL501) Mechanical Design Rules in Section VIII of the
ASME Boiler and Pressure Vessel Code (MC) MC104
Inspection, Repairs and Alterations of Pressure Vessels (LC) PD441 (Also online – EL503)
Bases and Application of Piping Flexibility Analysis
BAL ANCE OF PL ANT
BVP Code, Section VIII, Division 2: Alternative Rules – Design and Fabrication of Pressure Vessels (LC) to ASME B31 Codes (MC) MC110
PD448 (Also online – EL502)
Piping Vibration Causes and Remedies – A
Flow-Induced Vibration with Applications to How to Predict Thermal-Hydraulic Loads on Practical Approach (MC) MC111
Failure Analysis (LC) PD146 Pressure Vessels & Piping (LC) PD382
Piping Failures - Causes and Prevention (MC)
Non-Destructive Examination – Applying ASME Code Seismic Design and Retrofit of Equipment and MC117
Requirements (BPV Code, Section V) (LC) PD389 Piping (LC) PD394
Overview of Probabilistic Risk Assessment (PRA) BPV Code, Section XI: Inservice Inspection of Run-or-Repair Operability Decisions for Pressure
Standard (SS) EL541 Nuclear Power Plant Components (LC) PD192 Equipment and Piping Systems in Nuclear Plants
(MC) MC115
Developing a 10-Year Pump Inservice Test Program Risk-Informed Inservice Testing Program (LC)
(LC) PD595 PD597 (Also online –ZI309)
INSERVICE
KEY FOR COURSE TYPE: LC = Live Course MC = MasterClass Series IS = Instructor-Supported eLearning SS = Self-study eLearning
19
PUBLISHING
The ASME Digital Collection is ASME’s The ASME Journal Program has been
repository of current and archival established to further the progress of
literature comprising ASME’s Transaction science through the sharing the latest
Journals, Conference Proceedings, and engineering research. Each ASME Journal
eBooks. Boilers and Pressure Vessels is title publishes the highest quality,
one of the Collection’s main Topic areas; it peer-reviewed literature in its respective
includes more than 15,000 papers and field of mechanical engineering. Specific
chapters drawn from all publications. Journals related to Boilers and Pressure
Vessels include:
ASME sponsors more than 30 conferences
annually and publishes approximately • Journal of Engineering
100 proceedings volumes -- much of this Resources Technology.
content is relevant to Boilers and Pressure
• Journal of Engineering for Gas
Vessels. These proceedings include:
Turbines and Power.
• ASME Pressure Vessels and Piping
• Journal of Fluids Engineering.
Conference (PVP).
• Journal of Heat Transfer.
• International Conference on Nuclear
Engineering (ICONE). • Journal of Manufacturing Science
and Engineering.
• ASME International Mechanical
Engineering Congress and • Journal of Solar Energy Engineering.
Exposition (IMECE).
• Journal of Pressure Vessel Technology.
• ASME International Conference on
Offshore Mechanics and Arctic • Journal of Turbomachinery.
Engineering (OMAE). ASME Press has over 150 eBooks now
• ASME Power Conference. available. Specific titles related to Boilers
and Pressure Vessels include:
• ASME Fluids Engineering Division
Summer Meeting. • Primer on Engineering Standards
(2014).
• ASME Turbo Expo: Turbine Technical
Conference and Exposition. • Fluid Mechanics, Water Hammer,
Dynamic Stresses, and Piping Design
• International Pipeline Conference (IPC). (2013).
Visit asmeDIGITALCOLLECTION.asme.org
FOR DETAILS, CALL 1-800-THE-ASME (1-800-843-2763) (OR) 1-973-882-1170 (OR) VISIT GO.ASME.ORG/BPVC15.
21
ASME’S BOILER AND PRESSURE VESSEL CODE (BPVC) 2015
2015 ASME
Boiler and Pressure Vessel Code
An International Code
go.asme.org/BPVC15
COMING IN 2016!
Journal of Verification, Validation,
and Uncertainty Analysis
Editor: Ashley F. Emery
University of Washington
Frequency: Quarterly
FOR DETAILS, CALL 1-800-THE-ASME (1-800-843-2763) (OR) 1-973-882-1170 (OR) VISIT GO.ASME.ORG/BPVC15.