Professional Documents
Culture Documents
Boothill Miniatures Flag Sheets PDF
Boothill Miniatures Flag Sheets PDF
Toluca Toluca
Texas Alamo
Batallon Batallon
Batallon Batallon
Aldama Aldama
Mexican
CONSTITUTION CONSTITUTION
OF OF
LUX LUX
Batallon Batallon
LIBERTAS LIBERTAS
Matamores Matamores
Permanente Permanente
Austin Independence
VO VO
Jiminez Jiminez LUNTEERS LUNTEERS
Permanente Permanente FROM NEW ORLEANS FROM NEW ORLEANS
INDEPENDENCE INDEPENDENCE
INDEPENDENCE INDEPENDENCE
LIBERTY LIBERTY
JUSTICE JUSTICE
OUR OUR
COUNTRY’S COUNTRY’S
RIGHTS RIGHTS
OR OR
DEATH DEATH
INDEPENDENCE INDEPENDENCE
Print out the desired flag sheet. I cut the chosen flag out roughly Here I have used a scalpel and
Some good effects can be achieved with scissors. You can easily do metal rule to cut upto the design.
by using woven or hammered paper this and the next step together
but here I just used 80gsm photo- as one.
copier paper - the cheap stuff.
Now I fold the flag in half and Now I cover one half and into the Place your flag pole into the
make a crease. You can trim the crease with PVA glue. I used it crease.
edges with the scalpel and rule neat but you can thin it down.
quite well at this point.
Fold back in half, lining up the Because we can see a little of the Trim the pole to length, this one
edges as good as possible and white paper around the edges I was cut to 55mm, and paint it.
press the two sides flat together. take approximate colours and You may wish to wait until the
Leave to dry. touch up any white areas. pole is attached before painting.
This for me is the best bit. Just Although it will spring back a
crumple up and bend some folds little, the paper and PVA will be
into the flag. I tend to work from stiff enough to hold the bends. Add the flag to your miniature.
the pole going one way then the I also bend the corners in on the I drilled straight through this
next. diagonal. chaps top hand but only part
way into the other to form a cup
to support the pole.