Test case name CABtec navigation acceptance test Test ID Robot-AI1 Description Checks the engineering requirement : CABtec Type Black Box must be able to navigate autonomously in the test chamber Tester Information Name of tester Tee Kai Wen Date Hardware Ver Robot 1.0 Time Setup CABtec battery should be fully charge and placed on the track Step Action Expected Result Pass Fail N/A Comments 1 Program should be integrate tested to verify accuracy. Write a program Should sample wall at to monitor the sufficient rate, depending on robot position speed from the wall.
Put the robot on
test track and run test, and download data.
3 CABtec must stay within 3 to 4 centimeter of the wall 90% of the course, while traveling along the testing chamber.
4 CABtec must be able to
Overall Test Result
Integrating Test Test Writer : Wan Ariff Fadhil Wan Abdullah Test case name CABtec navigation acceptance test Test ID Robot-AI2 Description Checks the engineering requirement : CABtec Type Black Box must stay within 3 to 4 centimeter of the wall 90% of the course, while traveling along the testing chamber. Tester Information Name of tester Tee Kai Wen Date Hardware Ver Robot 1.0 Time Setup CABtec battery should be fully charge and placed on the track Step Action Expected Result Pass Fail N/A Comments 1 Program should be integrate tested to verify accuracy. Write a program Should sample wall at to monitor the sufficient rate, depending on robot position speed from the wall.
Put the robot on
test track and run test, and download data.
Overall Test Result
Unit Test Test Writer : Wan Ariff Fadhil Wan Abdullah Test case name CABtec navigation acceptance test Test ID Robot-AI3 Description Checks the engineering requirement : CABtec Type Black Box must stay within 3 to 4 centimeter of the wall 90% of the course, while traveling along the testing chamber. Tester Information Name of tester Tee Kai Wen Date Hardware Ver Robot 1.0 Time Setup CABtec battery should be fully charge and placed on the track Step Action Expected Result Pass Fail N/A Comments 1 Program should be integrate tested to verify accuracy. Write a program Should sample wall at to monitor the sufficient rate, depending on robot position speed from the wall.