Professional Documents
Culture Documents
Catalogo Varco BJ PDF
Catalogo Varco BJ PDF
CRT-14
instantaneously start rotation and circulation
through the casing string, the CRT 14 reduces
the probability of stuck casing. The tool also
has the ability to push casing into the well
with 40,000 lbs force allowing for stripping-in
during underbalanced drilling operations.
The design eliminates the power casing tong
operation near well center in addition to a
person at the stabbing board, maintains
proper alignment during stabbing and make-
up of casing, adds the ability for soft stabbing
and thread compensation while minimizing
casing thread damage.
Purposely designed, the fill-up tool allows for
fast change-out of seal and guide elements
when running mixed strings. The seals on the
fill-up tool prevent spillage of expensive
drilling fluids reducing the chance of
environmental incidents.
Features include: use of standard SL, FMS
slips and bottom guides, standard 132/144/
180 inch links, air-cushioned weight
compensator, torque/turn controls and
logging for premium casing connections are
included.
Specifications
Weight and Size
Weight 12,000 lbs. (5,443 kg)
Case Size Range O.D. 4 1/2” (114 mm) to 14” (356 mm)
Fill-up Tool 9 5/8” (244 mm) to 14” (356 mm)
Make-up Torque 45,000 lb. ft. (61,012 Nm)
Hoist Capacity 500 Tons API 8C
Push Down Force 40,000 lbs (18,144 kg)
Mud Circulation Pressure 5,000 psi
159
Designed for running casing, the type CRT 14
Casing Running Tool combines years of
operational experience between the TDS and
FMS (Flush Mounted Spider). Compact, it
uses Varco’s field proven technology while
increasing the work efficiency on the rig.
The CRT 14 is installed onto the shaft of the
Top Drive for rotation, torque and suspended
Varco BJ
Specifications
BX Hydraulically Actuated Elevator
Maximum Rating
Special Link Size
90°1
Frame Frame Size Range 18° Tool Coupling
Square
Drill Collars1
P/N Joint Shoulder
Riser Min. Max.
Bushing
3 203300Y10 9 5/8" - 20" n/a 350 ton n/a 350 ton 2 3/4” 3 1/2”
4-50 203290Y10 2 3/8" - 9 3/4" 500 ton 500 ton n/a 350 ton 2 3/4” 4 3/4”
4-75 203200Y10 2 3/8" - 9 3/4" 500 ton 500 ton 750 ton 350 ton 3 1/2” 4 3/4”
5 50004000Y10 3 1/
2" - 11" 750 ton 750 ton 1000 ton 350 ton 4 3/4” 5 1/2”
NOTES:
160 1. Make sure not to use the BX elevator to support loads in excess of the casing manufacturers recommended de-
sign loads, nor at loads higher than the coupling is designed to hold.
NOTES:
1. 2 Additional hydraulic lines required when using rotators.
Rotator part number: 50004130
Varco BJ
162
Varco BJ
Weight
Drill Collars
Zip Lift Size (kg / lbs)
Per Segment Drill Collars Weight
Plain Size (kg / lbs)
50004011Y435 4 3/4” DC with Zip lift bushing 22/48 (Lift-Plug) Per Segment
50004011Y362 6” DC with Zip lift bushing 20/44 50004013Y354 4 3/4” DC Plain bushing 22/48
50004011Y337 6 1/
4” DC with Zip lift bushing 20/44 50004013Y219 5 1/4” DC Plain bushing 20/44
50004011Y373 6 1/2” DC with Zip lift bushing 20/44 50004013Y348 6 1/4” DC Plain bushing 20/44
50004011Y387 6 3/4” DC with Zip lift bushing 20/44 50004013Y135 6 1/2” DC Plain bushing 20/44
50004011Y339 7 3/4” DC with Zip lift bushing 20/44 50004013Y334 8” DC Plain bushing 18/39
50004011Y336 8” DC with Zip lift bushing 18/39 50004013Y347 8 1/4” DC Plain bushing 18/39
50004011Y422 8 1/4” DC with Zip lift bushing 18/39
50004013Y580 8 1/2” DC Plain bushing 18/39
50004011Y426 8 1/2” DC with Zip lift bushing 18/39
50004013Y356 9” DC Plain bushing 18/39
50004011Y427 9” DC with Zip lift bushing 18/39
50004013Y346 9 1/2” DC Plain bushing 18/39
50004011Y370 9 1/2” DC with Zip lift bushing 18/39
50004013Y228 10” DC Plain bushing 18/39
50004011Y367 9 3/4” DC with Zip lift bushing 18/39
50004013Y229 10 1/2” DC Plain bushing 18/39
50004011Y195 10” DC with Zip lift bushing 18/39
50004013Y230 11” DC Plain bushing 18/39
50004011Y527 10 3/4” DC with Zip lift bushing 18/39
50004011Y419 11” DC with Zip lift bushing 18/39
Special
Square
Weight 163
Size (kg / lbs)
Shoulder Per Segment
50004014Y757 Riser handling bushing 8” 18/39
50004014Y783 Riser handling bushing 8 3/4” 18/39
50004014Y784 Riser handling bushing 8 5/8” 18/39
50004014Y788 Riser handling bushing 9 5/8” 18/39
Varco BJ
202271- 51202271-
202433-1 8 1/4 DC 8 3/4 8 1/4 350 2638 — — 12 7/8
825 825
202271- 51202271-
202433-1 8 1/8 DC 8 5/8 8 1/8 350 2650 — — 12 3/4
813 813
202272- 51202272-
202433-1 8 DC 8 1/2 8 350 2633 — — 13 1/4
800 800
202272- 51202272-
202433-1 7 3/4 DC 8 1/4 7 3/4 350 2655 — — 13
775 775
202272- 51202272-
202433-1 7 1/2 DC 8 7 1/2 350 2652 — — 12 3/4
750 750
Varco BJ
169
Varco BJ
Hydraulic Cathead
Hydraulic Cathead
Hydraulic Cathead
Specifications:
■ Line Pull : Variable to 26,000 lbs (11794 kg)
Description:
@ 2000 psi (140 Bar) variable to 32,500 lbs
Greater Safety for Rig Personnel. Snatch (14742 kg) @ 2500 psi (170 bar)
blocks and multi-line hook-ups are not ■ Speed : 0 to 1.5 ft/sec @ 29 GPM - free line
required for most connections. Shock loads pull (0 to .46 m/sec @ 110 l/min)
are replaced by a smooth, steady line pull to ■ Stroke : 84” (2134 mm)
save wear and tear on rig tongs. Once
■ Cylinder Stroke : 42” (1067 mm)
adjusted, the Varco HC26 pulls to the desired
force, up to 32,500 lbs, every time and with a ■ Line Diameter : 7/8” (22.23 mm)
quickness that is unequalled. It will also ■ Weight : 1883 lbs (854 kg)
make-up mousehole connections. ■ Load Indicator : reads directly in lbs. of line
This tool features the simplest, most positive pull
automatic cable feed out system yet devised. ■ Hydraulic Power Requirements : Flow Rate
After completing make-up or break-out the Range 29 to 35 GPM (110 to 133 l/min)
control lever is simply pushed into the detent ■ Operating Pressure range : 2000 to 2500 psi
position. The line will automatically and (140 to 170 Bar)
smoothly feed out and stop ready for the next Assembly numbers:
joint. ■ For Closed-Center operation : 76713
The HC 26 Hydraulic Cathead, includes ■ For Open-Center operation : 76713-1
cylinder housing and wire line assembly,
remote control box assembly and 25 foot
hoses to connect cylinder and control box.
Does not include main pressure and return
hoses.
171
HC 26 Hydraulic Cathead
Varco BJ
Spinning Wrenches
SSW 10
Specifications: SSW 40
■ Size range 3 1/2” to 5 1/2” (89-140 mm)
In a typical spinning operation the rig hand
■ Air Pressure: 90-120 psi (6,2-8,6 bar) swings the SSW-40 onto the pipe just above the
■ Air consumption:240 cfm (510 dm3/s) joint upset. The clamp control is pulled and the
■ Speed (5” pipe): 80-100 RPM
throttle handle actuated to spin in or out with
absolute precision.
■ Stall torque (5” pipe):1000 ft lbs (1350
Nm)
For added safety spin direction lockout feature
is included to prevent spinning pipe in wrong
■ Weight: 810 lbs (368 kg) direction.
Assembly number: (less rollers) Specifications:
172 10426 ■ Size Range : 3 ½” to 9 ½” (89-241 mm)
Roller Assembly ■ Speed (5” pipe) : 120 RPM
Pipe OD 3 1/2 4 4 1/2 5 5 1/ 2
■ Stall Torque (5” Pipe) : 1100 ft lbs (1490 Nm)
P/N 12035 12040 12045 12050 12055
■ Air Pressure : 90-120 psi (6,2-8,6 Bar)
■ Air Consumption : 250 cfm (530 l/s)
SSW 40 Spinning Wrench
Description: ■ Weight : 850 lbs (386 kg)
Proving the old saying that “Good things Assembly number: 73109
come in small packages”, the Varco SSW-40
is not only small in size but also the most
powerful pneumatic spinning wrench on
the market.
Varco BJ
Description: Description:
The hydraulically powered SSW 30 can spin The Varco TW 61 makes-up and breaks-out
drill pipe and drill collars from 2 7/8” to 9 1/2” drill pipe and drill collars from 4” to 8½” OD.
O.D. with no adjustments necessary. Its Torque is adjustable and can be pre-set to the
abundant power will bump up shoulders tight required value. Upper and lower gripping
enough so each joint is quickly torqued. structures provide the required torque. The
This lightweight tool is narrower and has TW 61 can rotate the tool joint pin up to 34°,
lower profile than previous spinning wrench to produce the desired torque while providing
designs. It achieves its compact shape by its own back-up. A built-in tugger is provided
using one large cylinder for clamping instead to pull the TW61 back out of the way while
of two. lowering or raising pipe stands. The tugger
can also be used to assist in pulling the TW61
Specifications: to a storage position. The tool has 6-foot
vertical travel range so it can locate at the
■ Size range 27/8” to 91/2” (73-241 mm) OD
exact tool joint height. The TW61 is human
■ Normal operating pressure: 2000 psi (140 engineered with all controls on the front of the
bar) tool.
■ Hydraulic power requirement: 29 to 45 GPM
(110-170 l/min)
■ Speed 5” dia pipe): 100 RPM
■ Stall torque (5” dia pipe): 900 to 1000 ft lbs
(1215-1350 Nm)
■ Weight: 850 lbs (385 kg)
Assembly number: Closed center;
19000-6, open center: 19000-7
Description:
6600 and 6800 Kelly Spinners
174
Varco BJ
Specifications:
HK 20000 Power Casing Tong
Hoses Couplings
1 x 979490-50 2 x 55906-20
1 x 979491-50 2 x 55906-24
HK 20000
NOTES:
1. 5 Dies for all sizes P/N 8500-5565
Varco BJ
Specifications
Rated
P/N
Size Size Cap/Set Weight/Set
in mm
tons lb kg
200450Y130 2x30 51x762 100 121 55
200450Y136 2x36 51x914 100 140 64
200450Y142 2x42 51x1070 100 162 74
200450Y148 2x48 51x1219 100 222 93
200450Y160 2x60 51x1524 100 222 101
176
Dynaplex Hook
Specifications
Hook Hook
Capacity Complete Complete
Model Tons With Less
Positioner Positioner
51000 1000 38327Y —
5750 750 31108Y —
5500 500 26955Y 26955Y1
5350 350 24767Y 24977Y
Varco BJ
Weldless Links
Weldless Links
Dimensions
Weldless Links
Dim. A B C D E F G H
in. 2 1/4 5 1/2 8 2 7/ 8 8 10 5 14
mm 57.2 139.7 203.2 73.0 203.2 254.0 127.0 355.6
in. 2 3/4 5 1/2 8 3 1/ 2 9 1/2 12 5 15,7
mm 69.9 139.7 203.2 88.9 203.2 254.0 127.0 355.6
in. 3 1/2 6 3/4 10 1/8 4 1/2 9 1/2 12,4 6 17
mm 88.9 171.5 257.2 114.3 241.3 204.8 152.4 431.8
in. 4 3/4 — — 6 10 1/4 14 1/2 7 1/2 23
mm 120.7 — — 152.4 260.4 368.3 190.5 548.2
in. 5 1/21 — — 6 12 1/2 17 1/2 8 1/4 29 1/4
mm 139.7 — — 152.4 317.5 444.5 209.6 743.0
in. 5 1/22 — — 6 8 13 7 19
mm 139.7 — — 152.4 203.2 330.2 177.8 482.6
NOTES:
1. Varco type
2. BJ type
178
Elevators
Elevators
18º Type Elevator BNC Model Auxiliary Elevators SJL and SPL
The BNC has a center latch elevator for Single-joint, center-latch elevator designed to
handling 18º external upset drill pipe and replace unsafe rope slings for hoisting collar-
tubing the inside surface of this elevator is type pipe into position. The SJL type enables
induction hardened to provide maximum the crew to handle pipe properly, helps to avoid
strength and long service. damage to pipe threads and reduces the chance
of accident or injury. The SPL is the same as the
Side Door Type Elevators SJL type except that the SPL is designed for use
X Series on tapered pipe.
The X-series elevators handle all sizes of
collar-type tubing, drill pipe and casing. The
SLX has a shielded safety latch mounted on
the elevator door. The shield protects the
latch from accidental opening. Both latches
operate from a single handle, and then
automatically relatch when the elevator
door is closed. The Type SX side-door
elevator, designed for handling large,
collar-type casing, is a sturdier, safety-
latch-equipped version of X-series
elevators.
SLX Elevator
DC Lift System
Elevators
Elevators
Elevators
183
Varco BJ
Bore Charts
184 NOTES:
1. Borecode BNC elevator.
Varco BJ
185
Bore Chart
Bore Chart
Drill Collars with Zip Lift Recess Plain Drill Collars with Lift Plugs
Bore Chart Bore Chart
Drill Bottom Drill Code Bottom
Code OD Bore Code Top Bore A Bevel C Bore B OD
Bore Code Top Bore A Bevel C
Bore B
4 1/ 8" 177 3 13/16" 1/
16" 4 1/ 4" 2 1/2" 201 2 21/32" 1/ "
16 2 21/32"
4 3/ 3/ " 7/
4" 4 4 8" 2
435 1/ 3/ " 203 2 29/32" 1/ " 2 29/32”
8 16" 4 16
5 1/ 4" 179 4 7/8" 1/
16" 5 3/ 8" 3" 205 3 5/32" 1/ "
16 3 5/32"
5 1/ 2" 180 5 1/8" 1/
16" 5 5/ 8" 3 1/8" 206 3 9/32" 1/ "
16 3 9/32"
5 3/ 4" 181 5 1/4" 1/
16" 5 7/ 8" 3 1/4" 207 3 13/32" 1/ "
16 3 13/32"
6" 362 5 1/2" 1/
16" 6 1/ 8" 3 1/2” 209 3 21/32" 1/ "
16 3 21/32"
6 1/
4" 337 5 3/ "
4 1/
16" 6 3/
8" 3 3/ "
4 211 3 29/32" 1/ "
16 3 29/32"
6 1/ 2" 373 6" 1/
16" 6 5/ 8" 4v 213 4 5/32" 1/ "
16 4 5/32"
6 3/ 4" 387 6 3/16" 3/ "
32 6 7/ 8" 4 1/8" 519 4 9/32" 1/ "
16 4 9/32"
7" 361 6 7/16" 3/ "
32 7 1/ 8" 4 1/4" 548 4 13/32" 1/ " 4 13/32"
16
7 1/ 4" 357 6 11/16" 3/ "
32 7 3/ 8" 4 1/2" 215 4 21/32" 1/ " 4 21/32"
16
7 1/ 2" 188 6 15/16" 3/ "
32 7 5/ 8" 4 3/4" 354 4 15/32" 1/ " 4 15/32"
16
7 3/ 4" 339 7 3/16" 3/ "
32 7 7/ 8" 5" 552 5 3/16" 1/ " 5 3/16"
16
8" 336 7 7/16" 3/ "
32 8 1/ 8" 5 1/4" 219 5 7/16" 1/ " 5 7/16"
16
8 1/ 4" 422 7 11/16" 3/ " 8 3/ 8" 5 1/2" 411 5 11/ 1/ " 5 11/16"
32 16" 16
8 1/ 2" 426 7 15/16" 3/ " 8 5/ 8" 5 3/ " 222 5 31/ 1/ " 5 31/32"
32 4 32" 16
9" 427 8 3/8" 1/
8" 9 1/ 8" 6" 349 6 7/ "
32 1/ " 6 7/32"
16
9 1/ 2" 370 8 7/8" 1/
8" 9 5/ 8" 6 1/4" 348 6 15/32" 1/ " 6 15/32"
16
9 3/ 4" 367 9 1/8" 1/
8" 9 7/ 8" 6 3/8" 331 6 19/32" 1/ " 6 19/32"
16
10" 195 9 3/8" 1/
8" 10 1/8" 6 1/2" 135 6 23/ " 1/ " 6 23/32"
32 16
10 3/4" 527 10 1/8" 1/
8" 10 7/8" 6 3/ " 338 7" 1/ " 7"
4 16
11" 419 10 3/8" 1/
8" 11 1/8" 7" 372 7 1/ 4" 1/ " 7 1/4"
16
11 1/4" 196 10 5/8" 1/
8" 11 3/8" 7 1/4" 335 7 1/ 2" 1/ " 7 1/2"
16
7 1/2" 137 7 3/ 4" 1/ "
16 7 3/4"
7" 550 8" 1/ " 8"
16
8" 334 8 1/ 4" 1/ "
16 8 1/4"
8 1/4" 347 8 1/ 2" 1/ "
16 8 1/2"
8 1/2" 580 8 25/32" 1/ "
16 8 25/32"
8 3/4" 226 9 1/32" 1/ "
16 9 1/32"
186 9" 356 9 9/32" 1/ "
16 9 9/32"
9 1/4" 227 9 17/32" 1/ "
16 9 17/32"
9 1/ " 346 9 25/32" 1/ " 9 25/32"
2 16
10" 228 10 11/32" 1/ "
16 10 11/32"
10 1/2" 229 10 27/32" 1/ "
16 10 27/32"
11" 230 11 11/32" 1/ "
16 11 11/32"
Varco BJ
Casing Elevators/Spiders
Casing Elevators/Spiders
350 Ton Elevator/Spider 4 1/2” To 14” 500 Ton Elevator/Spider 4 1/2” To 14”
— Varco Type — Varco Type
P/N Description P/N Description
Elevator/Spider Less Slips and Guides 3900 lb 13800Y Elevator/Spider Less Slips and Guides 5000 lb (2268 kg)
11776
(1769kg) 11798 Bell Guide Kit 400 lb (181 kg)
11798 Bell Guide Kit 400 lb (181kg) 19276 Spider Adapter Plate 700 lb (318 kg)
19276 Spider Adapter Plate 700 lb (318kg) 11881 Airline and Filter assembly
11881 Airline and Filter assembly
NOTES:
1. Numbers followed by the letter “B” indicate beveled in-
serts (required at top and bottom of each slot).
Varco BJ
Casing Elevators/Spiders
NOTES:
1. Uses same size components as air operated version. 16”
slips made before May 2002 cannot be used in hydraulic
Elevator/Spider.
2. Uses same controls of BX & PS
500 Ton Elevator/Spider Varco Type 3. Complete with pipe detectors and feedback signals
500 Ton Elevator/Spider 16” to 24 1/2” 750 Ton Hydraulic Operated Elevator/
— Varco Type Spider
P/N Description P/N
Elevator/Spider Less Slips and Guides 10,500 lb Elevator 50006500Y with auto setting system
15740Y 4 1/2" - 14" Elevator 50006500Y2 without auto setting system
(4763 kg)
19001 Bell Guide Kit 600 lb (272 kg) Spider 50006500Y1
16552 Spider Adapter Plate 2700 lb (1225 kg) Elevator 50006600Y with auto setting system
16" - 24 1/2" Elevator 50006600Y2 without auto setting system
11881 Airline and Filter assembly Spider 50006600Y1
Casing Elevator
Spider Slip Set
Bottom Top With Insert Set
Size Guide Guide Inserts Qty.
(In.) P/N
P/N P/N P/N
16 16184 73138 15790Y6 2636 180
18 15794-6 73139-6 15790Y4 2635-180 180
18 5/8 15794 73137 15790Y3 13868-4201 420
20 15793 73136 15790Y2 2635-180 180
22 50006055 50006074 15790Y5 2635-180 180
24 15792 73135 15790Y1 2635-180 180
24 1/2 74818 74817 15226Y1 2635 180
NOTES:
1. Circular buttons used for 18 5/8” casing.
190
Varco BJ
Casing Elevators/Spiders
Casing Elevators/Spiders
NOTES:
1. Numbers followed by the letter “B” indicate beveled in-
serts (required at top and bottom of each slot).
750 Ton Elevator/Spider VarcoType 2. Circular buttons used for 18 5/8” casing.
Varco BJ
Casing Elevators/Spiders
192
Casing Elevators/Spiders
7 177.80 51952 51937 52552-5 26750 75 18 5/8 473.08 51973 51964 52533-11 32561 195
7 5/8 193.68 51953 51938 52552 16407 75 20 508.00 51972 51962 52533 32186 195
22 558.80 51971 51961 52534 51222 225
8 5/8 219.08 51954 51939 52553-8 25474 90
24 609.60 51970 51960 52535 51221 225
9 5/8 244.48 51955 51940 52553 15660 90
24 1/2 622.30 51969 51235 52536 51790 225
10 3/4 273.06 51956 51941 52554-8 25474 105
11 3/4 298.45 51957 51942 52554 15660 105
12 3/4 323.85 51958 28571 52555-5 32700 135
13 3/8 339.73 51958 28571 52555 15660 135
193
Casing Elevators/Spiders
194
Varco BJ
Description
CU, CUL & CB Casing Bushings
Casing
Rotary Bushing &
Table Casing Size Weight
Size Make (in.)
Insert
lbs. (kg)
Bowl
(in.)
(P/N)
11 3/4 & 13 3/8 CU (3102) 470 (213)
17 1/2 -
ALL W/bowl No.
20 1/2 9 5/8 & 10¾ 342 (155)
2 (1902)
18 5/8 & 20 CUL(3103) 938 (425.5)
W/bowl
16 20x16 562 (255)
(3104)
26 & W/bowl No.
ALL 11 3/4 & 13 3/8 846 (384)
27 1/2 1 (3105) CUL Casing Bushing
W/bowl No.
9 5/8 & 10 ¾ 342 (155)
2 (1902)
W/bowl No.
2 3/8 & 8 5/8 464 (210.5)
3 (1809)
18 5/8 & 20 CB (6695) 713 (323)
W/bowl 20
16 572 (259)
ALL x 16 (6127)
27 1/2 27 1/2 W/bowl No.
API 11 3/4 & 13 3/8 895 (406)
1 (6126)
W/bowl No.
9 5/8 & 10 ¾ 252 (114)
2 (6114)
CB
30 1100 (499)
(V11763)
26 CB (16454) 1100 (499)
24 CB (11253) 1200 (544)
23 CB (11252) 1200 (544)
37 1/2 - 18 5/8 & 20 CB (10187) 1600 (726)
195
NATIONAL
49 1/2
W/bowl 20
16 572 (259)
x 16 (6127)
W/bowl No.
11 3/4 & 13 3/8 895 (406)
1 (6126)
W/bowl No.
9 5/8 & 10 ¾ 252 (114)
2 (6114)
Varco BJ
W/bowl No.
9 5/8 & 10 3/4 252 (114)
2 (6114)
The Baash-Ross 200 ton Hinged Casing Most casing strings’ weight and the relatively
Spider will fit most casing handling thin pipe wall make it important that the
operations. It can be placed on the rotary supporting slips provide full circumferential
table, mounted on a platform which replaces grip. The BAASS-ROSS Type UC-3 slips
the rotary table, or supported by cribbing, achieves this with many norrow segments.
depending upon the auxiliary equipment and They are hinged together to wrap around the
procedure to be followed. casing and exert a more uniform pressure.
With each segment carrying the same load,
they automtically center the casing string
within the bushing or spider. The UC-3 has a
3” taper. With changes in the number of
segments and liners, it will handle strings
from 16” OD to 42” OD. Liners are held in
place by a liner Retainer Key and Cotter Pin.
197
Varco BJ
For extreme high-torque drilling. Essentially For heavy duty square drive applications.
two HDP bushings combined into one unit, Components are interchangeable with HDP.
this tool reduces wear to kelly and itself Unit comes with wrench, wiper and wear
through wider force distribution. For master gauge. Weight 1420 lbs.
bushings with 25 ¾” pin circle. Unit comes
with wrench, wiper and wear gauge. Weight
2850 lbs.
Kelly Wiper
Kelly HDP, HDS Square Hex
Size
(inches) P/N Wt Lb P/N Wt Lb
3 API 8-0260 4 8-0320 4
3 1/2 API 8-0265 4 8-0285 4
27” HDP Roller Kelly Bushing
4 1/4 API 8-0170 3 3/4 8-0275 3 3/4
NOTES:
200 1. Sleeve bearings are standard, for roller bearings add R at end of P/N
Master Bushings
Master Bushings
Master Bushings
2 way lifting sling part no. 1021 MPCH with # 3 bowl & SDXL slips
4 way lifting sling part no. 6699
202
Varco BJ
Master Bushings
MSPC
203
Varco BJ
Master Bushings
17 ½” & 20 ½” Bushings
Description Description
17 ½ and 20 ½ Medium Duty Pin Drive Split MSP 27 ½ Split Pin Drive bushings are also
Master Bushing are designed for shallow to available. With the larger rotary opening the
medium depth service. standard No. 3 Extended API taper is used. This
allows the use of extra-long SDXL slips required
Extended API Taper for heavier loads. Weight 1600 lbs (726 kg).
The MDSP Master Bushings have an
extended APT taper in the bowls that
provides 50 % more slip support than do
square drive bushings.
Varco SDML slips, used in the MDSP master
bushing are a proven combination that can
handle drilling to 15,000 feet.
Note : Varco BJ does not recommend using
split master bushings in rotary tables with
more than 3/16” (5 mm) wear in the rotary
table bore. Rebuild rotary bore or purchase
a solid type bushing.
Units come complete with bit breaker
adapter plate and lifting sling.
Weight lbs (kg) :
■ 17 ½” complete, 737 (334); body only 577
(262)
■ 20 ½” complete, 1100 (499); body only
924 (419)
204
MDSP
Varco BJ
Master Bushings
Master Casing Bushing (MSS) Unit comes complete with No. 3 insert bowl
and lifting sling. Weight lbs (kg):
17 1/2 thru 27 1/2 Solid Body Square Drive
■ 17 ½ complete, 695 (315); body only,
Master Casing Bushing (MSS) is designed for 429 (195)
all drilling operations. A 4 inch deep recess
■ 20 ½ complete,1108 (503); body only,
accommodates a square drive kelly bushing 842 (382)
to sit within the master bushing. Developed
■ 23 complete, 1390 (630); body only,
for use when a 10,000 foot well was 1142 (518)
considered deep, the MSS still serves a useful
■ 26 complete, 1740 (789); body only,
purpose where a large slip backup area is not 780 (354)
required. With the extended API insert bowl
■ 27 ½ complete, 1970 (893); body only,
No. 3, the MSS will handle 2 3/8 thru 8 5/8 inch 1010 (458)
OD drill pipe, drill collars, tubing, and casing.
Insert bowl No. 2 can handle tubular goods 9
5/ and 10 3/ inches OD. The MSS design,
8 4
with its solid body, retains the correct API
taper for medium and short rotary slips
(Varco’s SDML and SDS) under all load
conditions. These slips receive correct backup
and hold tubulars uniformly. The solid outer
body takes all transverse loads and provides
proper backing for the split insert bowls
allowing the rotary table to rotate freely,
unimpaired by transverse loads.
NOTES:
1. No Bowl Lock is used in this bushing.
2. Special API extended insert bowl for tripping only.
205
Varco BJ
Rotary Slips
Slips
Description
SDS, SDML and SDXL Rotary Slips are for
use in API standard insert bowls. Featuring
better contact and distribution of load on
drill pipe thru a superior wraparound
configuration and unique insert design,
these slips prevent bottlenecking and
gouging damage. The buttress design of
the body segments provides great strength
while minimizing weight for ease of SDXL Slip
handling.
Insert Contact Length
SDS 11”
SDML 13 3/
4 ”
SDXL 16 1/
2 ”
API
Slip Size Pipe SDS SDML SDXL SDHL 750
(in.) Sizes P/N P/N P/N ton P/N
OD (in.)
Rotary Slips
NOTES:
1. Use 23” bowl
Varco BJ
Circular Buttons
Circular Buttons
Circular Buttons for CMS-XL and CP-S Circular Buttons for DCS Slips
Casing Weight Drill Collar Weight
Slip Set OD (in) P/N Qty Slip Set OD (in.) P/N Qty
Lbs Kg Lbs Kg
6 5/8 2628-144 36 16 144 3-4 2628-49 13 6 49
DCS-S
7 2619-144 36 16 144 4 - 4 7/ 8 2620-49 8 3.5 49
7 5/8 2630-144 24 11 144 4 1/ 2 - 6 2628-63 16 7 63
DCS-R
8 5/
8 2630-156 26 12 156 5 1/ 2 - 7 2620-63 11 5 63
9 5/8 2630-168 28 13 168 5 1/ 2 - 7 2513-88 22 10 88
10 3/4 2630-180 30 14 180 6 3/4 - 8 1/4 2630-88 15 7 88
11 3/4 2627-204 51 23 204 8 - 9 1/ 2 2630-96 16 7 96
12 4 &
3/ DCS-L 8 1/
2 - 10 2627-104 26 12 104
2630-216 36 16 216
13 3/8 9 1/4 - 11 1/4 2630-112 19 8.5 112
CMS-XL
14 13868-240 40 18 240
11 - 12 3/4 2625-136 13 6 136
16 2631-252 43 19.5 252
12 - 14 2630-136 16 7 136
18 13868-300 60 27 300
18 5/8 2626-300 60 27 300
20 2631-312 52 23.3 312
22 13868-360 60 27 360
24 2631-360 60 27 360
26 2631-396 64 29 396
28 13868-432 68 31 432
30 2631-444 72 32.5 444
24 2631-156 26 12 156
CP-S 26 2631-168 28 13 168
30 2631-192 32 14.5 192
209
Varco BJ
210
Varco BJ
Power Slips
Description
Varco Power Slips are designed to eliminate
the manual lifting and setting of slips. The PS-
15 uses coil springs as a counterbalance to
offset the weight of the slips when in upper,
released position. Slips are set by standing on
the slipset ring. The foot pedal is pressed to
release the slips. The PS-16 is an air operated
power slip controlled with a foot valve. The
slips are set by gravity and released with air
pressure much like Varco BJ’s casing elevator/
spiders.
PS-15 and PS-16 Power Slip Features: PS 15 Spring Slip
PS 16 Power Slip
PS-15/PS-16
Ps-16 Compl.
Ps-15 Complete With Air Con-
Slip Body Size Drill Pipe Size With Guide & trols & Hose Insert Set Guide Ring
In. In. Slip Set P/N P/N P/N
Slip Set P/N Guide & Slip Set
P/N
4 1/2 3 1/ 2 18172-45-35 78181-45-35 7686 2163-16B-32 79011-1
4 1/
2 4 18172-45-40 78181-45-40 7685 2164-16B-32 79011-2
4 1/2 4 1/ 2 18172-45-45 78181-45-45 7684 2165-48 79011-2
5 1/2 4 1/ 2 18172-55-45 78181-55-45 7691 2168-16B-32 79011-2 211
5 1/2 5 18172-55-50 78181-55-50 7690 2169-16B-32 79011-3
5 1/2 5 1/ 2 18172-55-55 78181-55-55 7689 2170-48 79011-4
7 5/ 1
8 6 5/ 8 78181-76-66 7696 2632-24B-48 7799
NOTES:
1. For tripping only
HT Manual Tongs
HT Manual Tongs
HT Manual Tongs
HT 100
Complete less lug jaws 100000 533 200071
Lug jaw assembly 4”-8 1/2” 100000 135 200663-1
Lug jaw 8 1/2”-12” 100000 102 200664
Lug jaw 12”-15” 75000 140 200665
Lug jaw 15 3/4” 100000 162 200666
Lug jaw 16”-17” 60000 135 200667
Hinge jaw assy. 8 1/2”-17” 100000 112 200662-1
HT 135
Complete less lug jaws 135000 659 200520
Lug jaw 7 1/2”-9 1/2” 135000 142 200525
Lug jaw 9 1/2”-11” 135000 168 200526
Lug jaw 10 3/ ”-12”
4 135000 182 200527
HT 200
Complete less lug jaws 200000 1050 200500
Lug jaw 6”-7 7/8” 200000 80 200506-SP
Lug jaw assembly 8”-9 5/8”
200000 89 200506-1
or 11 1/2”-13 1/4”
Lug jaw assy. 9 1/2”-11 1/8”
200000 104 200507-1
or 13”-14 3/4”
Lug jaw assembly 11”-12 1/2”
200000 150 200508-1
or 14 3/8”-16”
Hinge jaw assy. 11 1/2”-16” 200000 60 200505-1
HT 501
Casing head assy. 13 3/8”-14 1/2” 50000 340 200580-1
Casing head assy. 14 1/2”-16” 50000 352 200580-2
Casing head assy. 16”-17 1/2” 50000 373 200580-3
Casing head assy. 17 1/2”-19” 50000 385 200580-4
Casing head assy. 19”-20” 50000 397 200580-5
Casing head assy. 20”-21 1/2” 50000 418 200580-6
Casing head assy. 21 1/2”-23” 50000 430 200580-7
Casing head assy. 24”-25 1/2” 50000 459 200580-8
Casing head assy. 25 1/2”-27” 50000 490 200600-1
Casing head assy. 27”-28 1/
2” 50000 499 200600-2
Casing head assy. 28 1/2”-30” 50000 531 200600-3
213
Casing head assy. 30”-31 5/8” 50000 542 200600-4
Casing head assy. 31 1/2-33” 50000 572 200600-5
Casing head assy. 33”-34 1/2” 50000 612 200600-6
Casing head assy. 34 1/2”-36” 50000 618 200600-7
NOTES:
1. To be used with HT55 tong and hanger