This document provides specifications for an industrial motor. It is a 30 horsepower, 230/460 volt, 60 Hertz, 3 phase motor suitable for continuous duty. Features include a cast iron frame, premium efficiency of 94.1%, Class F insulation, and footnotes regarding construction details.
This document provides specifications for an industrial motor. It is a 30 horsepower, 230/460 volt, 60 Hertz, 3 phase motor suitable for continuous duty. Features include a cast iron frame, premium efficiency of 94.1%, Class F insulation, and footnotes regarding construction details.
This document provides specifications for an industrial motor. It is a 30 horsepower, 230/460 volt, 60 Hertz, 3 phase motor suitable for continuous duty. Features include a cast iron frame, premium efficiency of 94.1%, Class F insulation, and footnotes regarding construction details.
APPLICATIONS: For use where water and dust exposure is minimal.
Ideally suited for use on
pumps, compressors, blowers, fans, and other standard industrial applications.
Features Include:
Cast Iron frame construction
Premium efficient C-Face with base 1.25 service factor 3-year warranty on Premium efficient motors Class F insulation systems Shielded ball bearings for direct coupled applications Torques exceed NEMA performance standards Inverter-Rated UL Recognized and CSA certified Footnotes: C, US
Volts 230 Volts 460 Volts 190/380
F.L. Amps 74 F.L. Amps 37 F.L. Amps 75/37.5 S. F Amps 91 S. F Amps 45.5 S. F Amps RPM 1800 Hertz 60/50 HP 30 Duty CONTINUOUS TYPE TDS KW 22.4 Frame 286TSC Serv. Factor 1.25 Phase 3 Max Amb 40 Design B Code G Insul Class F Protection NOT Therm.Prot. Eff 100% 94.1 Eff 75% PF 81 UL V-INS, CONST UL REC CSA Yes Bearing OPE 210 CC Number CC004A CE Yes Bearing PE 311 Load Type Inverter Type Speed Range NONE Motor Wt. 461 LB Enclosure DP Lubrication STANDARD Nameplate 92117 Mounting RIGID Rotation REV 9/4/2007 11:27:42 PM - 1/6/2010 8:38:11 AM Table of Contents District Sales Offices and Warehouses Footnotes Agricultural Duty Motors High Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 171, 182 LEESON District Sales Offices & Warehouses can provide complete information including price and availability on both standard stock and S Steel frame 26 Shaft is 1/2”” Dia. X 1 1/2”” long with flat Eco-AG Series / Premium Efficient . . . . . . . . . . . . . . . . . . . . . . . . . . 172 special motors. New Stock Ratings Extra High Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 United States A C Aluminum frame Cast Iron frame 27 28 Shaft is 5/8” Dia. X 1.97” ling with 3/16” keyway 1/4” long extended through-bolts Fan Duty / Crop Dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 Grain Stirring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 ARKANSAS, Little Rock n GEORGIA, Atlanta MINNESOTA, Minneapolis n n PENNSYLVANIA, Allentown/ US Made in the USA 29 IEC Frame - See IEC dimension chart in back of catalog for High Efficient Eco-AG, Catfish Pond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 District Mgr., District Mgr., District Mgr., John Marshalla Philadelphia MX Made in Mexico dimension information Farm Duty, AG - Pump Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Kevin Springstead Walter Brooks 952/935-8273 District Mgr., CA Made in Canada 30 CW rotation only, from lead end of motor Milk Transfer Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 972/245-2017 770/933-0453 Fax: 952/935-8399 Craig Brisbane Single Phase Motors............. see page 172 Feed Auger Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 Fax: 972/245-2328 Fax: 770/933-0549 570/325-3684 CN Made in China 31 For motors having a ”P” suffix letter in the date code MISSOURI, St. Louis n 2 These combination 56H base motors have mounting holes 32 Motor has terminal board connection Feather Picker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 n CALIFORNIA, n ILLINOIS, Chicago District Managers Fax: 570/325-3870 for 56 and 143-5T, and 1/2 diameter shaft with flat 1.5” long 33 Automatic overload - cannot use with VFD Hatchery / Fan Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Los Angeles Co District Mgrs., Pat and Ken Anvender n TEXAS, Dallas 3 Combination 56 H base has mounting holes for NEMA 56 34 1” long extended through-bolts Automotive Duty Motors . . . . . . . . . . . . . . . . . . . . . . . . . . 104 - 111 Co-District Mgrs., Mike Miller, 314/714-1460 District Mgr., Homer Rodden, Brakemotors Felix Wilson, Robert Sheppard Fax: 314/714-1461 Kevin Springstead and 143-5T and a standard NEMA 145T frame shaft of 7/8” 35 Terminal studs at 12:00 Premium Efficient Eco-AG, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 Oswald Aguirre 630/458-9511 NEW JERSEY/METRO NEW 972/245-2017 Dia. 36 Special BA dimension 2.31 for belt guard clearance Farm Duty, Washdown Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 323/278-7979 Fax: 630/458-1923 YORK/LONG ISLAND Fax: 972/245-2328 4 These motors have a NEMA 215T base mounting pattern 37 Uses drip cover kit 175305.00 Breakmotor Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 Fax: 323/278-7955 n INDIANA, Indianapolis TEXAS, Houston Three Phase Motors.............. see page 172 Definite Purpose Motors n CALIFORNIA, District Mgr., (Plainfield, NJ 18229) Contact: Dave Beck Contact, and shaft height of 5.25”, with usable length of 3 3/8 and 38 Uses drip cover kit 175004.00 diameter of 1 1/8 with standard key 39 Uses drip cover kit 175932.00 Compressor Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 San Francisco Matt Simko 570/325-3684 Donnie Heckler 5 Combination 56 H base has mounting holes for NEMA 56, 40 Uses drip cover kit 175933.00 Pressure Washer Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 District Mgr., 800/331-2911 Fax: 570/325-3870 713/952-5337 Dave Richardson Fax: 440/975-3575 Fax: 972/245-2328 and has a standard NEMA 145T frame shaft of 7/8”” Dia. 41 Uses drip cover kit 175846.00 Woodworking Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 N n EW YORK, Syracuse Instant Reversing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 925/371-8125 n IOWA, Des Moines District Mgr., n UTAH, Salt Lake City 6 Combination 56H base has mounting holes for NEMA 56 42 Uses drip cover kit 175849.00 Higher HP SST Stainless Boat Hoist Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 Fax: 925/371-5673 District Mgr., Chris Brisbane District Mgr., and NEMA 143-5T and a standard NEMA 56 shaft of 5/8” 43 Uses drip cover kit 175962.00 Motors – to 30 HP Two-Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 n COLORADO, Denver John Marshalla 866/505-8796 Kevin Springstead 7 48YZ motors have std. 48-frame base with 1/2” dia. X 1 44 Uses drip cover kit 175963.00 Crusher / Quarry Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 District Mgr., 952/935-8271 Fax: 570/325-3870 800/444-7609 (Available 4th QTR. 2012)................ see page 156 7/8 long shaft ext. with flat. Also includes sleeve to convert 45 Uses drip cover kit 175614.00 Elevator Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 Kevin Springstead Fax: 952/935-8399 n NORTH CAROLINA, Charlotte Fax: 972/245-2328 shaft to 5/8” dia. With 3/16” square key” 46 50 Hz operation at rated HP Unit Handing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 800/444-7609 n KANSAS, Kansas City District Mgrs., n WASHINGTON, Seattle Fax: 972/245-2328 8 NEMA 145TC shaft, 7/8” X 2 1/4” and NEMA 56 removable 47 Rated at 50Hz at full rated HP Export Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 District Mgr., Steve McAbee District Mgr., base 48 190/380V, 50Hz at next lowest HP @1.15 S.F. Explosion Proof Motors n CONNECTICUT, Hartford Pat Donnelly and Doug Landgraf Amorette Gent Single Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 - 100 / Metro Boston, MA 913/599-6983 803/396-8200 425/775-3504 9 S56CZ motors have mounting bases with NEMA 56 49 Class F insulated Carbonator Pump Motors..... see page 116 Three Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 - 103 District Mgr., Fax: 913/599-6987 Fax: 803/396-8208 Fax: 425/775-6706 mounting holes, NEMA 56/143-5T C-face and a NEMA 50 Suitable for single speed operation only General Purpose Motors Dave Manning MARYLAND/Baltimore n OHIO, Cincinnati n WISCONSIN, Milwaukee 143-5T shaft extension (7/8”” dia x 2 1/4” long) 51 Mechanical centrifugal starting switch with overspeed Single Phase Drip-Proof Motors 888/479-7875 District Mgr., Craig Brisbane District Mgr., Ken Simko Co-District Mgrs., 10 Motor has mounting base with 182T mounting holes, shaft protection, others have electronic start switch General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 9 Fax: 508/987-1173 570/325-3684 513/755-1000 Brian Birtic and Mark Ziegler height is 4.5”. Shaft is std. NEMA 56-5/8” dia. X 1 7/8 long 52 Extra high starting torque Premium Efficient - Fan Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 n FLORIDA, Tampa Fax: 570/325-3870 Fax: 513/755-1081 414/475-9222 11 TEBC totally enclosed blower cooled 53 Capacitor start/capcitor run design for reduced amperage, Unit Handling Motors............ see page 252 Compressor Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 District Mgr., n MICHIGAN, Grand Rapids O n HIO, Cleveland Fax: 414/475-9267 12 TENV totally enclosed non-vented others are capacitor start/induction run Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Bill Taylor District Mgr., District Mgr., Matt Simko Resilient Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 813/740-2571 13 TEFC totally enclosed fan cooled 54 Split phase start, capacitor run is suitable for belt drive Greg Norris 440/951-5117 Single Phase Totally Enclosed Motors Fax: 813/663-9104 616/249-8430 Fax: 440/975-3575 14 F1 mounting only within the airflow of the fan General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - 17 Fax: 616/249-8628 800/331-2911 (W.PA, WV) 15 Built-in conduit box located at 12:00 55 Split phase start, capacitor run Premium Efficient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Export Only Motors............... see page 253 16 1/2” diameter shaft - 2 1/4” long 56 Designed for inverter duty operation Resilient Base Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 International Regal Beloit Canada 17 5/8” diameter shaft - 2 5/8” long 57 Rated for farm duty service Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 International Sales Administrator, EUROPE n ALBERTA, Edmonton n ONTARIO, Toronto 18 Shaft extension has keyway and flat 180º apart for ease of 58 Provision for belly band mount, no base Single Phase C Face Motors Sue Kastner Mr. Ole Bakker Branch Mgr., National Sales Mgr., mounting 59 Resilient base with provision for belly band mount General Purpose - Drip-Proof & TEFC . . . . . . . . . . . . . . . . . . . 20 - 27 WISCONSIN, Grafton Mors 1-5, Eibergen Mike Strenkowski Michael Tough 19 Shaft is 5/8” Dia.by 2.0” long 60 Rigid base Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 (+1) 262/377-8810 Netherlands 7151MX 780/437-3380 905/670-4770 Higher HP Explosion Unit Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Fax: (+1) 262/377-3440 Mobile: (+31) 6-13-12-15-92 Fax: 780/434-3448 Fax: 905/670-8971 20 Shaft is 5/8” Dia.by 2 5/8” long 61 Nema 145TC face mounting with removable NEMA 182T Proof C Face Motors............. see page 101 Three Phase Drip-Proof Motors ASIA (+31) 545-46-46040 n BRITISH COLUMBIA, Vancouver n ONTARIO, Hanover 21 Shaft is 3/4” Dia.by 3 1/2” long rigid base General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 38 Fax: (+31) 545-47-50-65 22 Standard 5/8” diameter shaft with keyway plus 3/4” deep 62 Provision for belly band and pedestal fan mounting, no rigid Mr. William Chua Branch Mgr., Branch Mgr., Compressor Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ole.bakker@regalbeloit.com 12 Tuas Loop Keary Bott Doug Stafford hole drilled and tapped to 1/4-20 UNC in end of shaft to base Resilient Base Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Singapore 637346 MIDDLE EAST 9087A - 198 Street 800/463-1797 facilitate mounting of some fan blades 63 Resilient base F2 Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 (+65) 6863-3473 Mr. P. Mathivanan 888-599-1177 Fax: 800/225-9007 PO Box No 1085, PC: 114 23 Standard 7/8” diameter shaft with keyway plus 3/4” deep Automatic Overload Protected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Fax: (+65) 6863-3476 Fax: 604-888-0337 Muscat OMAN n QUEBEC, Candiac hole drilled and tapped to 1/4-20 UNC in end of shaft to Three Phase Totally Enclosed Motors n CENTRAL AMERICA, n MANITOBA, Winnipeg Branch Mgr., General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 52 (+968) 92192416 facilitate mounting of some fan blades SOUTH AMERICA & CARIBBEAN Branch Mgr., Michael Jenkins Resilient Base Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Fax: (+968) 24789519 24 Motor’s shaft is 1 inch longer than standard FLORIDA, Miami Charlie Vogel 275 Liberte Compressor Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 (+1) 305/220-4423 UNITED KINGDOM 25 Shaft extension has keyway and flat 180º apart for ease of 204/786-6802 514/337-8020 TENV Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Fax: (+1) 305/220-5945 Ms. Magda Bartosova Fax: 204/786-6934 Fax: 514/337-0773 mounting. Useable shaft is 1 1/2” long by 1/2 Dia., 1/8” F2 Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Rotor UK Ltd l NEW BRUNSWICK, Moncton keyway SUB-FHP Inverter Rated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 16 Everitt Close Denington Industrial Estate Branch Mgr., Three Phase C Face Motors Wellingborough UK NN8 2QF Ken Sheehan General Purpose - Drip-Proof & TEFC . . . . . . . . . . . . . . . . . . . 58 - 75 (+44) 1933-230900 506/383-8883 HVAC / Fan Motors Fax: 506/383-8887 Resilient Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Fax: (+44) 1933-272152 Premium Efficient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Multi-Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 n SALES OFFICE AND WAREHOUSE SALES OFFICE ONLY WAREHOUSE ONLY