Professional Documents
Culture Documents
Answer :
o Install os load the VGA and LAN drivers after increase the SWAP Memory 3 times
of physical RAM and Assign IP Address .
o Install Kernel patches and java files
o Install dialog and central instance (Start à Programs SAP system setup of install
Dialog and Central and Database instance .
o C11a install central and database instance.
PARAMETERS:
1.Memory
2.Number of parallel process
3.Instance number
4.SID
5.Central Transport host
6.Data base name
7.Sap data.. Up1 to Data six locations .
2. Question 2. What Is The Folder It Will Ask To Install Oracle ?
Answer :
Orahome81 path=Oracle.
3. Question 3. What Is You Allocate Disks To Different Areas In Sap ?
Answer :
a. Disk1,Disk2,(Raid 1 min 4 GB)à winnt, Saparch.
b. Disk3,Disk4( Stripe Min 4 GB)à swap.
c. Disk5 (min 4 gb) Origilog A, Mirror log B, TRANS:
d. Origlog B , Mirror log A, SAPREORG.
e. Sapdata1, Sapdata2 ,Sapdata3 , up to Sapdata6.
4. Question 4. How Much Swap Memory Should Be In The System ?
Answer :
Three times of main Memory – at least 2GB.
5. Question 5. What Is Meant By The Terms L And F Access?
Answer :
An L access method refers to local printer. It is local to the SAP server, not the user.
An F access method refers to front end printer. This uses the users Windows printer.
6. Question 6. How Many Types Of Work Processes ?
Answer :
There are 7 types:
( Dialog , Enque , Update , Background,Spool,Message server,Gateway)
7. Question 7. What Is Difference Between Central Instance And Dialog Instance ?
Answer :
Central Instance have message server installed on it whereas Dialog Instance do not have
message server.
8. Question 8. How to See The Work Process Status?
Answer :
SM50.
9. Question 9. How Many Types Of Printer You Have Configured ? How Do You
Differentiate Between Them ?
Answer :
4 types of printers
Production Printing , Mass Printing ,Test Printing, Desktop Printing .
10. Question 10. Where Printer Port(lpt) Is Running On The System ?
Answer :
Network and Desktop printers.
11. Question 11. What Is The Transaction Code For Creating Roles And How To Users And
What Is Method You Will Follow ?
Answer :
PFCG , then we generate the profile after that assign roles to users.
12. Question 12. Have U Applied Patches What Is The Transaction Code ?
Answer :
yes, SPAM.
13. Question 13. What Are The Two Files Present While Importing Patches From Os Level
To Sap Level ?
Answer :
PAT,.ATT.
14. Question 14. On Which System You Have Applied Patches ?
Answer :
DEV and QA.
15. Question 15. How Many Types Of Client Copies And Which Method Do You Prefer ?
Answer :
we prefer mainly remote Client Copy.
16. Question 16. What Is The Difference Between Remote Client Copy And Client Export ?
Answer :
RemoteCopy Using RFC connection we will perform remote copy.
ClientExport Using TMS configuration we will perform client export and then we have to
import client to copy the client – STMS has to be created first for doing Client Export.
17. Question 17. How Mucn Time It Will Take To Copy A Client Of Size 650gb?
Answer :
More than 17 hours.
18. Question 18. What Is The Job Of Application Server?
Answer :
It takes the request from the user and if the request requires data than it connects to database
server and gives output.
19. Question 19. What Are The Daily Activates?
Answer :
Background job logs, Spool Logs, Work Processes Overview , Users Overview, All
Application Servers active or not .
20. Question 20. What Will You Observe In St06 ?
Answer :
CPU, SWAP , Memory , Hard Disk Space.
21. Question 21. What Is St03 ?
Answer :
Workload Analysis.
22. Question 22. What Is The Difference Between St06 And St03
Answer :
ST06 is OS Monitoring.
ST03 is used for - Monitor OS and Database and SAP System.
23. Question 23. What Will Observe In St03?
Answer :
Hit Ratio and Buffer Fillers and Roll Memory and Swap memory .
24. Question 24. Have You Configured Operation Modes?
Answer :
yes (RZ04,SM63,RZ03).
25. Question 25. Where Will You Change The Parameters In Three Profiles?
Answer :
Instance Profile ,RZ10.
26. Question 26. Can You Change The Profile Parameter In The Os Level? Which One Is
Advisable Why ?
Answer :
We can change the profile parameter from OS level. Its not recommended .
27. Question 27. What Is Development Class ? Why To Create The Development Class ?
Answer :
Group of requests under one logical name is development class. When ever we change in R3
repository it should be assigned to development calss and it internally assigned to transport
layer .
28. Question 28. Do You Know About Oss What Do You Do With Oss?
Answer :
Yes it is online system service.
29. Question 29. Do You Know Logon Groups At Which Situation Will Be Created Logon
Group ?
Answer :
Yes, If we find load on application server then we have to create logon group (If the
production department users are more than we have to create logon group for that department
).
30. Question 30. How Many No Of Users Have Been Connected To That Particular Logon
Group ?
Answer :
100 to 150 users.
31. Question 31. What Is The Purpose Of Enqueue Processor ?
Answer :
Enque work process makes sure that database in consistent state.
32. Question 32. What Are The States Of Back Ground Job ?
Answer :
6 states
o Scheduled
o Ready
o Released
o Active
o Finished
o Cancelled
33. Question 33. If A User Complaints That He Could Not Execute Some Of The
Transaction Codes Then What Will You Do ?
Answer :
Use T-code SU53 , This will show which authorization is missing in his profile.
34. Question 34. What Are The Daily Transactions ?
Answer :
AL03,SM04,SM37,SP01,SM21 etc..
35. Question 35. What Are Patches You Applied ?
Answer :
SAP_BASIS,SAP_ABAP,SAP_HR,SAP_SD.
36. Question 36. What Are The Different Types Of Sap Profiles?
Answer :
There are 3 types of profiles in SAP.
They are
o DEFAULT.PFL (known as System Profile)
o Start Profile
o Instance Profile
37. Question 37. What Is Purpose Of Logon Load Balance?
Answer :
To distributed the workload between application servers.
38. Question 38. Which Tcode Is Using Logon Load Balance ?
Answer :
SMLG.
39. Question 39. I Am Having Two Application Servers The Logon Load Balance Is There ;
If The User Wants To Connect To Application Server Which Will Connected First.
Answer :
Messages server is will assign the Application server automatically.
40. Question 40. How Do You Distribute The Load.
Answer :
Depend upon the load, according to module we have to configure logon groups.
41. Question 41. How To Analysis Abap Dumps ?
Answer :
o By seeing ABAP dump error we come to know that whether the error or developer
technique.
o If belongs to insufficient memory dump error display at which stage the
transaction terminate and how much memory requires. So that we have to increase
the memory (Through Instance profile).
o If belongs to table space error it displays the table name so that we increase the
table space through the SAPDBA.
o If belongs to program error we have analysis the ABAP program through se30.
o If belongs to developer technique cancel the ABAP program.
42. Question 42. Each And Every Work Processor Is Full Even Though The User Wants To
Execute The Program. Then What's The Solution ?
Answer :
o If you don’t have second applicaitno server than we have to cancel te particular
work processor (through SM50).
o If u have second application server than we have to configure the logon groups.