Professional Documents
Culture Documents
Voip Switch Demo Installation Guide
Voip Switch Demo Installation Guide
Voip Switch Demo Installation Guide
VoipSwitch Demo
Installation Guide
Table of contents
1.
Introduction ......................................................................
........................................ 3 2. Hardware
requirements ......................................................................
................... 3 3. Obtaining
software...........................................................................
....................... 3
3.1.
VoipSwitch ........................................................................
..................................................... 3 3.2. MySQL Community
Server.............................................................................
..................... 3 3.3. MS SQL
Server ............................................................................
......................................... 4 3.4. Microsoft .NET Framework
2.0................................................................................
........... 4
4.
Installation.......................................................................
......................................... 4
4.1. Microsoft .NET Framework
2.0................................................................................
........... 5 4.2. MySQL Community Server installation &
configuration.................................................. 7 4.3. MS SQL
Server installation &
configuration ...................................................................
13 4.4. VoipSwitch Demo & MySQL
Connector/ODBC ............................................................. 21
5.
Configuration .....................................................................
....................................26
5.1. VoipSwitch &
MySQL .............................................................................
............................ 26 5.2. VoipSwitch & MS
SQL ...............................................................................
........................ 32
-2-
VoipSwitch Demo Installation & Configuration Guide
1. Introduction
Demo version is a fully functional version of VoipSwitch system with the limits of
five concurrent calls. It consists of the main application and does not contain the
WEB interfaces or additional modules either (IP IVR - two stage dialing,
SMS/ANI/PIN callback, Resellers module, Online Shop and CallShop). These modules
can be accessed and tested only through our online server. To arrange a demo
session, please contact us at sales@voipswitch.com. The software requires an SQL
server, either MySQL or MS SQL. The installation procedures for both database
servers are described further in the installation guide.
2. Hardware requirements
The supported operating systems are all versions of Microsoft Windows 2000, 2003
and XP. Hardware platform should be chosen on the basis of the type and the scale
of tasks that are to be performed. The underneath table describes the hardware
recommended for VoipSwitch system. Concurrent calls 30 120 500 1000 CPU Pentium IV
2 GHz Pentium IV 2.8 GHz Xeon Pentium IV 2.4 GHz Dual Xeon Pentium IV 2.8 GHz RAM
512 MB 1 GB 1 GB 2 GB HDD 50 GB 50 GB 80 GB 80 GB
3. Obtaining software
3.1. VoipSwitch
In order to download the demo version please fill the form on our website (it will
appear after clicking on “demo” link on our main page). In response an email will
be sent to the address provided with URL for download the demo package.
-3-
VoipSwitch Demo Installation & Configuration Guide
4. Installation
It is recommended to carry out the installation process in the following order: 1)
2) 3) 4) 5) install Microsoft .NET Framework 2.0; install SQL server, either MySQL
or MS SQL; install VoipSwitch demo package; configure connection to the SQL server;
create voipswitch database.
-4-
VoipSwitch Demo Installation & Configuration Guide
Check the box labeled “I accept the terms of the License Agreement” and click the
Install button.
-5-
VoipSwitch Demo Installation & Configuration Guide
The software is now being installed (the process can be aborted at any moment by
pressing the Cancel button).
After few minutes the installation is completed. Press the Finish button.
-6-
VoipSwitch Demo Installation & Configuration Guide
The following window will appear where the required setup type has to be chosen.
The
-7-
VoipSwitch Demo Installation & Configuration Guide
recommended type is labeled as Typical and selected by default.. Click the Next
button.
-8-
VoipSwitch Demo Installation & Configuration Guide
Click Next button through subsequent two screens until reaching the last window of
the wizard. Leave the Configure the MySQL Server now option checked and click the
Finish button in order to start the server configuration phase.
-9-
VoipSwitch Demo Installation & Configuration Guide
Select Standard Configuration (recommended for not advanced users) and press Next
button.
- 10 -
VoipSwitch Demo Installation & Configuration Guide
In this step leave the current settings as they are and press the Next button.
Set the root password. Type a password in the empty fields and press the Next
button.
- 11 -
VoipSwitch Demo Installation & Configuration Guide
Configuration wizard in now ready to start the configuration of the SQL server,
click the Execute button to proceed.
After several seconds you should get following window indicating that the whole
procedure has been completed successfully and your settings have been applied.
Press the Finish button to close the configuration wizard.
- 12 -
VoipSwitch Demo Installation & Configuration Guide
- 13 -
VoipSwitch Demo Installation & Configuration Guide
- 14 -
VoipSwitch Demo Installation & Configuration Guide
Setup wizard is now checking system for potential installation problems. If you do
not have
- 15 -
VoipSwitch Demo Installation & Configuration Guide
any Errors and the Success message has appeared you can now click the Next button.
Leave the Hide advanced configuration options option checked and click the Next
button.
Change the authentication mode from “Windows Authentication Mode” to “Mixed Mode”,
set the password and click the Next button.
- 17 -
VoipSwitch Demo Installation & Configuration Guide
- 18 -
VoipSwitch Demo Installation & Configuration Guide
The installer is now ready to start, press the Install button. The software is
being installed. This part can take several minutes.
After installation and configuration of the all components click the Next button.
- 19 -
VoipSwitch Demo Installation & Configuration Guide
- 20 -
VoipSwitch Demo Installation & Configuration Guide
- 21 -
VoipSwitch Demo Installation & Configuration Guide
- 22 -
VoipSwitch Demo Installation & Configuration Guide
Click the Close button to finish the installation of VoipSwitch Demo and start
automatically the MySQL Connector/ODBC setup wizard.
- 23 -
VoipSwitch Demo Installation & Configuration Guide
If you want to use MySQL server then click the Next button, otherwise click on
Cancel.
Leave the Typical option checked and click the Next button.
The setup wizard is now ready to begin the installation, click the Install button.
- 24 -
VoipSwitch Demo Installation & Configuration Guide
- 25 -
VoipSwitch Demo Installation & Configuration Guide
5. Configuration
Depending on the type of the SQL server used in the setup, go to corresponding
sections below:
- 26 -
VoipSwitch Demo Installation & Configuration Guide
Click OK and then, on another window, click Yes to go to the database connection
configuration page.
- 27 -
VoipSwitch Demo Installation & Configuration Guide
Click the Yes button to confirm removing existing database and creating new with
default values.
- 28 -
VoipSwitch Demo Installation & Configuration Guide
To ensure that the database has been created correctly click again on Test
connection and accessibility button.
.
- 29 -
VoipSwitch Demo Installation & Configuration Guide
In the next step click on Validate and wait for several seconds for the procedure
to complete.
- 30 -
VoipSwitch Demo Installation & Configuration Guide
- 31 -
VoipSwitch Demo Installation & Configuration Guide
Now, you are ready to launch VoipSwitch application. Click Start, All Programs,
VoipSwitch and then VoipSwitch. If all has been configured properly you will see,
in the
In the Protocol page select Yes for the Enabled option. Go to the second page (IP
Addresses) and in section IP All in field TCP Port put 1433 and click Apply button.
- 32 -
VoipSwitch Demo Installation & Configuration Guide
- 33 -
VoipSwitch Demo Installation & Configuration Guide
Restart the server. Choose in the menu on the left SQL Server 2005 Services option
and on the right SQL Server (SQLEXPRESS). Click on the button with red square
inside (as shown on the underneath picture)
- 34 -
VoipSwitch Demo Installation & Configuration Guide
After the sql server has stopped click on “Run” icon so as to start the service
again.
Start VSM (VoipSwitch Manager) application – click Start, All Programs, VoipSwitch
and VSM. Following error message will appear (informing that there is no connection
to database). Click the OK button.
- 35 -
VoipSwitch Demo Installation & Configuration Guide
Change the type of database server to MSsql. In the field labeled Username enter
sa, and in the field Password put the password that has been set during the
installation/configuration process of MS SQL Server (it was defined for user sa ).
Click the Test connection and accessibility button.
- 36 -
VoipSwitch Demo Installation & Configuration Guide
Click the Yes button to confirm removing existing database and creating new with
default values.
After several seconds the task will be completed. Click again on Test connection
and accessibility button.
- 37 -
VoipSwitch Demo Installation & Configuration Guide
- 38 -
VoipSwitch Demo Installation & Configuration Guide
Now, you are ready to launch VoipSwitch application. Click Start, All Programs,
VoipSwitch and then VoipSwitch. If all has been configured properly you will see,
in the Logs window, messages reporting particular services having started
successfully.
- 39 -