Professional Documents
Culture Documents
Petrel-Introduction PDF
Petrel-Introduction PDF
In this chapter we will load well data needed for the project which are
3.event data
4.production data
6. Tops data
Well heads
The first thing you need to do is load you well heads data
1. Well name
2. X-coordinate
3. Y-coordinate
4. Kelli bushing
5. Bottom depth
6. Well Deviation.
For this project i skip deviation but will give you short description
All data mentioned above are well know . I want to keep you attention on kelly bushing
kelly bushing or rotary bushing is fn adapter that serves to connect the rotary table to the kelly.
But in petrel this is altitude or sub sea true vertical depth (SSTVD) of rotary table
Why rotary table not well head ?? The main reason that you make logging form rotary table and
measure depth(MD) from the table. Kb and well deviation then used to convert your MD values to
SSTVD values.
I supply the file with small macro for you is the main task to analysis it as i will use this file in my next
examples
Note . In order to make the button working you need to enable macros in you excel do the following
http://www.dds.ca.gov/WorkServices/docs/DS1964MacroInstructions.pdf
纰
in the excel file you have all data needed so press the button
After pressing the button the will be file in the directory where you place excel file
This is text file with all the data needed to load your well heads
if you open file type window you will see the list of formats that supported by petrel
Note: there two major types of format ASCII and binary try to use ASCII format when taking or giving
data as you can read data in this format.
From drop down menu choose well heads
㽸ؐ
Petrel red the file and show dialog
㲈ؐ
As i used headers i old petrel the data i use in text file . But if you are not use headers you can do
manual assign of columns in the file
Press left button of your mouse and select all colums and press remove button . Now click 5 time on
add button
You will get following window
p٩
Now from drop down menu tell petrel what each column means
Keep in mind this option. It says to petrel how p٩
many rows it should skip during reading of file in this case
7 not 9 change it to 7 and press ok for all
To change appearance of you wells double click on well folder and you will be taken to well global
settings window
In Style window you can change appearance of wells
p٩
Now lets go to the menu we have under well folder.
2. Global completion
3. Well attributes
4. Well filters
5. Saved search
Global well logs - folder were petrel process and store well logs
Global completions - folder were petrel stores completion or event data like perforations, casings
diameters, plugs etc.
Global observed data - folder where you can store production o volumetric data like oil gas water rates
and injections.
p٩