Professional Documents
Culture Documents
Ironmongery Body Details
Ironmongery Body Details
PROTECTION PLATES:
Kick/Strick/Push plate shall be of 3mm thick stainless steel, satin finish.
HINGES:
Hinghes for fire rated door shall be stainlesss steel triple knuckle button tripped with
caged ball bearings.
Hinghes for non-fire rated doors shall be stainless steel washered triple knuckle
aluminium butts or stainless steel double-washered hinges.
PULL HANDLES:
Pull handles should be of an approved aluminium section with corrosion proof bolts with
cup washers and locking patches.
DOOR STOOPERS:
Floor mounted door stops shall be of stainless steel body of 45mm diameter with 38mm
projection and rubber buffer. Stops shall be complete with 'raw bolt' fixing device.