Professional Documents
Culture Documents
ENG - Sequential LPG Reducer Maintenance Guide PDF
ENG - Sequential LPG Reducer Maintenance Guide PDF
Up-date: 07/02/2003
WARNING:
While unscrewing the six screws, hold the
cover down with one hand to prevent it from
springing off..
fig.1
fig.2
Remove the spring.
fig.3
Take the diaphragm out of the
regulator casing.
fig.4
fig.6
WARNING:
Protect yourself with your hand in case the
plate is projected outwards.
fig.7
fig.8
fig.9
Turn the regulator over
fig.10
fig.11
Take the plunger out by slightly pressing
down from the top.
fig.12
fig.13
Insert the new plunger, putting it in from
bottom to top, ensuring the stem is correctly
inserted in the GAS expansion chamber.
fig.14
fig.16
fig.17
Insert the plate, making sure the hole of the
securing screw matches up with the relative
threading in the casing.
fig.18
fig.19
fig.20
fig.22
fig.23
fig.24
Servicing the Solenoid valve:
Unscrew the screw that secures the coil.
Remove the coil.
fig.25
Unscrew the sleeve that carries the small
piston.
fig.26
fig.27
fig.28
Replace the filter with a new one.
Tighten the cap again.
fig.29
Maintenance is complete.
fig.30
Time schedules: