Cleveland, Ohio 44117-1199 Q1 Lot Number: 14963013 Product: Excalibur® 7018 MR® Classification: E7018 H4R Specification: AWS A5.1:2012, ASME SFA-5.1 Date November 02, 2016 This is to certify that the product named above is of the same classification(s) and design as the material used for the tests reported herein. The material was tested according to the specification(s) indicated and met all requirements. It was manufactured and supplied according to a Quality System Program that meets the requirements of ISO9001 among others as documented on The Lincoln Electric web page (http://www.lincolnelectric.com/en-us/company/Pages/certifications.aspx). E7018 H4R Operating Settings Requirements RESULTS Electrode Size 294 1 mm) 5/32" (4.0 2 mm) 5/32" (4.0 3 mm) 3/16" (4.8 4 mm) 3/16" (4.8 Current Type/Polarity AC,DC+ AC DC+ AC DC+ Nominal Current, A 185 165 240 210 Nominal Voltage, V 23 22 23 21 Average Heat Input, kJ/mm (kJ/in) 2.0 (50) 1.9 (47) 2.1 (54) 2.0 (52) Travel Speed, cm/min (in/min) 13 (5) 13 (5) 15 (6) 13 (5) Pass/Layers 16/8 16/8 16/8 16/8 Preheat Temperature, °C (°F) (225 min.) 120 (250) 120 (250) 120 (250) 120 (250) Interpass Temperature, °C (°F) (225 - 350) 165 (325) 165 (325) 175 (350) 175 (350) Postweld Heat Treatment As-welded As-welded As-welded As-welded As-welded Mechanical properties of weld deposits Tensile Strength, MPa (ksi) (70 min.) 540 (79) 530 (76) 530 (77) 530 (77) Yield Strength, 0.2% Offset, MPa (ksi) (58 min.) 450 (66) 430 (62) 440 (64) 440 (64) Elongation % 22 min. 29 31 31 30 Average Impact Energy (20 min.) 189 (139) 274 (202) 259 (191) 205 (151) Joules @ -29 °C (ft-lbs @ -20 °F) 165,184,218 (122,135,161) 257,264,303 (189,194,223) 255,259,263 (188,191,194) 170,212,232 (126,157,171) Average Hardness, HRB Info. Only 86 84 85 84
Chemical composition of weld deposits (weight %)
C 0.15 max. 0.05 0.04 0.05 0.04 Mn 1.60 max. 1.17 1.20 1.14 1.10 Si 0.75 max. 0.44 0.46 0.53 0.50 S 0.035 max. 0.004 0.005 0.007 0.006 P 0.035 max. 0.012 0.012 0.011 0.012 Cr 0.20 max. 0.04 0.04 0.02 0.02 Ni 0.30 max. 0.03 0.03 0.01 0.01 Mo 0.30 max. 0.01 0.01 0.00 0.00 V 0.08 max. 0.01 0.01 0.01 0.01 Mn+Ni+Cr+Mo+V 1.75 max. 1.26 1.29 1.20 1.15
Page 1 of 3 Cert. No. 31758
The Lincoln Electric Company 22801 St. Clair Avenue CERTIFICATE OF CONFORMANCE Cleveland, Ohio 44117-1199 Q1 Lot Number: 14963013 Product: Excalibur® 7018 MR® Classification: E7018 H4R Specification: AWS A5.1:2012, ASME SFA-5.1 Date November 02, 2016 E7018 H4R Operating Settings Requirements RESULTS Electrode Size 294 5 1/4" (6.4 mm) 6 1/4" (6.4 mm) Current Type/Polarity AC,DC+ AC DC+ Nominal Current, A 340 320 Nominal Voltage, V 25 22 Average Heat Input, kJ/mm (kJ/in) 2.6 (66) 2.6 (65) Travel Speed, cm/min (in/min) 20 (8) 15 (6) Pass/Layers 20/10 20/10 Preheat Temperature, °C (°F) (225 min.) 120 (250) 120 (250) Interpass Temperature, °C (°F) (225 - 350) 165 (325) 165 (325) Postweld Heat Treatment As-welded As-welded As-welded Mechanical properties of weld deposits Tensile Strength, MPa (ksi) (70 min.) 570 (82) 540 (78) Yield Strength, 0.2% Offset, MPa (ksi) (58 min.) 480 (69) 450 (66) Elongation % 22 min. 30 30 Average Impact Energy (20 min.) 164 (121) 107 (79) Joules @ -29 °C (ft-lbs @ -20 °F) 158,160,174 (117,118,128) 28,125,167 (21,92,123) Average Hardness, HRB Info. Only 88 86
Chemical composition of weld deposits (weight %)
C 0.15 max. 0.06 0.05 Mn 1.60 max. 1.32 1.30 Si 0.75 max. 0.46 0.46 S 0.035 max. 0.005 0.006 P 0.035 max. 0.009 0.009 Cr 0.20 max. 0.03 0.03 Ni 0.30 max. 0.01 0.01 Mo 0.30 max. 0.01 0.01 V 0.08 max. 0.01 0.01 Mn+Ni+Cr+Mo+V 1.75 max. 1.38 1.36
Page 2 of 3 Cert. No. 31758
The Lincoln Electric Company 22801 St. Clair Avenue CERTIFICATE OF CONFORMANCE Cleveland, Ohio 44117-1199 Q1 Lot Number: 14963013 Product: Excalibur® 7018 MR® Classification: E7018 H4R Specification: AWS A5.1:2012, ASME SFA-5.1 Date November 02, 2016 E7018 H4R Diffusible Hydrogen (per AWS A4.3) Requirements RESULTS Electrode Size 294 1 3/32" (2.4 mm) 2 3/32" (2.4 mm) 3 1/4" (6.4 mm) 4 1/4" (6.4 mm) Current Type/Polarity AC DC+ AC DC+ Nominal Voltage, V 21 21 22 22 Nominal Current, A 105 90 340 320 Diffusible Hydrogen, mL/100g 4 max. 2 2 4 4 Abs. Humidity (gr moisture/lb dry air) 79 81 56 56 E7018 H4R Moisture Requirements RESULTS Electrode Size 294 1 3/32" (2.4 mm) 2 5/32" (4.0 mm) 3 1/4" (6.4 mm) Coating moisture - As received 0.3 max. 0.1 0.1 0.1 Coating moisture - Humidified 0.4 max. 0.2 Info. Only 0.4 1. This document meets the requirements of EN10204, type 2.2, when a specific lot or order number is referenced. It does not meet the requirements of type 3.1. November 02, 2016 2. The electrode sizes required to be tested for this classification are 5/32 inch, 3/16 inch and 1/4 inch. All other sizes manufactured will also meet these requirements. Toronto Cunningham, Certification Supervisor Date 3. The 1/4 inch diameter electrode was reconditioned prior to diffusible testing at 800°F for 1 hour. 4. Fillet Weld Test (positions as required): Met requirements. November 02, 2016 5. Radiographic Inspection: Grade 1 - Met requirements. Rich Bollas, Certification Supervisor Date 6. Strength values in SI units are reported to the nearest 10 MPa converted from actual data. Preheat and interpass temperature values in SI units are reported to the nearest 5 degrees.