Professional Documents
Culture Documents
required TA Luft-leak rate 1) Testing conditions (s.a. VDI 2440 bzw. VDI 2200)
for flat gaskets Flange pair: DN40/PN40
Sealing surface roughness: 3.2 μm < Ra < 6.3 μm
Required leak rate Sealing surface pressure: 30 N/mm2
Treatment temperature: 200 °C
for secondary circuits Treatment time: 2,000 h
(VDI 2200: only 48 h)
Sealability reached by REINZ- Test pressure (helium): 1 bar
AFM® 34 according to TA Luft
10-9 10-8 10-7 10-6 10-5 10-4 10-3 10-2 10-1 100 101
. .
Helium leak rate QLHe [mbar l / (s m)]
difference:
more than factor 1,000
The measurement proves: AFM® 34 exhibits an extraordinarily high level of safety with a minimal leakage rate of
8.6.10-8 mbar.l / (s.m) (blue bar).
The TA Luft (green bar) specifies a leakage rate of less than 10-4 mbar.l / (s.m).
REINZ-Dichtungs-GmbH
Reinzstraße 3-7
89233 Neu-Ulm
Deutschland
Phone +49 (0) 731-7046-7 77
Fax +49 (0) 731-7046-3 99
www.reinz.com