Professional Documents
Culture Documents
1. A welder has made 25 SMAW groove welds, but the guided bend
test for the welder's qualification was never performed. In order to
avoid cutting out all of the production welds made by this welder,
which of the following minimum steps would be taken to validate
the qualification?
a. P - Nos
b. F - Nos
c. S – Nos
d. A - Nos
--------------------------------------------------------------------------------------------------------------------------------------------
/conversion/tmp/scratch/407044184.doc
1/18/2019 / 12:32:26 PM / NCD
Professional Training and Consultation
b. Ultrasonic testing
c. D.P. check
b. None of above
--------------------------------------------------------------------------------------------------------------------------------------------
/conversion/tmp/scratch/407044184.doc
1/18/2019 / 12:32:26 PM / NCD
Professional Training and Consultation
a) A longitudinal crack
b) A circumferential crack
c) Pits that are one half through wall
d) General corrosion
--------------------------------------------------------------------------------------------------------------------------------------------
/conversion/tmp/scratch/407044184.doc
1/18/2019 / 12:32:26 PM / NCD
Professional Training and Consultation
a) Once a month
b) Approximately 6 month intervals
c) Once a year
d) Once every 3 months
a. ASME Section V
b. ASME Section IX
c. ASME B31.3
d. API 570
a. 2
b. 4
c. 6
d. 3
a. 1G
b. 2G
c. 5G
--------------------------------------------------------------------------------------------------------------------------------------------
/conversion/tmp/scratch/407044184.doc
1/18/2019 / 12:32:26 PM / NCD
Professional Training and Consultation
d. 6G
19. What are the methods for detecting thickness of buried piping?
20. You are reviewing a WPQ for a welder. The test results indicate the
following:
a. Yes
b. No, because bend tests are not correct type.
c. Not enough information given
d. No, because radiography is essential for welder
qualification
------------------------------------End----------------------------
--------------------------------------------------------------------------------------------------------------------------------------------
/conversion/tmp/scratch/407044184.doc
1/18/2019 / 12:32:26 PM / NCD
Professional Training and Consultation
ANSWER KEY
--------------------------------------------------------------------------------------------------------------------------------------------
/conversion/tmp/scratch/407044184.doc
1/18/2019 / 12:32:26 PM / NCD