Professional Documents
Culture Documents
One approach, however, might be to introduce hollow glass beads. Although ceramic glasses have densities
comparable to that of aluminum, a hollow bead will have a very low density. The glass also has a high
melting temperature and could be introduced into liquid aluminum for processing as a casting.
Para producir un material compuesto de matriz de aluminio con una densidad de 1.5 g /
cm3, deberíamos seleccionar un material que tenga una densidad considerablemente
menor que 1.5 g / cm3. Si bien la densidad del polietileno lo haría posible, el polietileno
tiene un punto de fusión muy bajo en comparación con el aluminio; esto haría muy difícil
introducir el polietileno en una matriz de aluminio sólida; procesos como la fundición o la
metalurgia de polvos destruirían el polietileno. Por lo tanto, el polietileno NO sería una
posibilidad probable. Un enfoque, sin embargo, podría ser introducir cuentas de vidrio
huecas. Aunque los vidrios de cerámica tienen densidades comparables a las del
aluminio, una cuenta hueca tendrá una densidad muy baja. El vidrio también tiene una
alta temperatura de fusión y podría introducirse en aluminio líquido para procesarlo como
fundición.
Aluminum provides good heat transfer due to its high thermal conductivity. It has good ductility and
toughness, reasonably good strength, and is easy to cast and process. The silicon carbide, a ceramic, is hard
and strong, providing good wear resistance, and also has a high melting temperature. It provides good strength
to the aluminum, even at elevated temperatures. However there may be problems producing the material—for
example, the silicon carbide may not be uniformly distributed in the aluminum matrix if the pistons are
produced by casting. We need to assure good bonding between the particles and the aluminum—the surface
chemistry must therefore be understood. Differences in expansion and contraction with temperature changes
may cause debonding and even cracking in the composite