Professional Documents
Culture Documents
end points. In this project, we are required to design a truss that is capable to support a pin and
a roller which support the loads given as in the question. The behaviour of complex truss beam
is identified by analysing the result of both experimental and numerical methods. Besides that,
the design of the truss must fulfil the specification given such as the magnitude and location of
the loads applied and as well as the type of supports with the dimensions given. Moreover, we
need to determine the axial forces in the members of the truss whether it is tensile or
compressive force. The material that are used to design the truss is also taken into account
because it is crucial to ensure its durability and safe to be used. The method that is used in this
project is …..
OBJECTIVES
1. The main objective of this project is to enhance the understanding and concept of
structural analysis.
4. Improve learning skills and communication skills for engineers by completing memos,
5. Able to collect data and information as well as come up with good conclusion.
INTRODUCTION