You are on page 1of 216

PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

KING LIFTING
Tel: 0117 982 1121
www.kinglifting.co.uk

SPECIFICATION GUIDE
'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'
PREVIOUS PAGE NEXT PAGE

CONTENTS
INTRODUCTION
CONTENTS
GUIDANCE NOTES
LIFTING HEIGHT CHART
CRANES
CAPACITY CRANES CAPACITY CRANES
8te Tadano TS 75M/L 130te Grove GMK 5130
25te Kato CR-250 (City Crane) 140te Terex Demag AC140-1
30te Terex/Demag AC30 (City Crane) 200te Terex/Demag AC200-1
40te Terex/Demag AC40-2L 250te Terex/Demag AC250-1
40te Terex/Demag AC40-1 (City Crane) 350te Terex Demag AC350-6
60te Grove GMK 3055 500te Liebherr LTM1500
60te Terex/Demag AC60-3L 9te Spierings SK 599-AT5
70te Terex/Demag AC70 (City Crane) 10te Spierings SK 1265-AT6
80te Terex/Demag AC80-2 18te Spierings SK 2400-AT7
3te Maeda Compact Crane

SPECIALISED EQUIPMENT
CAPACITY SPECIALISED EQUIPMENT CAPACITY SPECIALISED EQUIPMENT
3000kg Caterpillar VC60E Forklift @ 500mm 7000kg Hyster Spacesaver S7.00XL Forklift @ 600mm
5000kg Caterpillar VC110F Forklift @ 500mm 15880kg Versa-Lift 25/35 @ 610mm Extended Ballast
5500kg Mitsubishi FGC55K Forklift @ 600mm 27300kg Versa-Lift 40/60 @ 915mm Extended Ballast
6050kg Caterpillar T150D Forklift @ 600mm 100te Power Lift System

TRANSPORT
The Quick Guide to Notification attendant and Marker Requirements
CAPACITY TRANSPORT
150te MAN TGX 26.540 6x4 BBS
150te MAN TGX 26.540 6x4 BBS
150te MAN TGX 33.480 6x4 BBS
90te MAN TGX 26.480 6X4 BLS
10.2te Scania Rigid 8x4 + Fassi Crane S660A
10.2te Scania Rigid 8x4 + Fassi Crane S660A
14.0te Scania Rigid 8x4 + Palfinger Crane 35000B
11te DAF FTG85CF 380 Rigid 6x4 + Atlas Crane
3.0te Mercedes Attego 815 Rigid Flatbed with Side Boards
PLANT NO TRAILERS
K1 ARB Semi-Low-loader Tri-Axle
K2 King 6 Axle Ballast Trailer
K4 King 6 Axle Ballast Trailer
K5 SDC 45-70ft Tri-Axle Flatbed Extendable
K6 Overlander TPT36E Euroliner 13.2m Tri-Axle
K8 McCauley c279917 Tri-Axle Drag Trailer
K9 McCauley c281241 Tri-Axle Drag Trailer
K10 King 5 Axle Ballast Trailer
K11 Nooteboom 5 Axle Plant Trailer
K12 Broshuis 5 Axle Ballast Trailer

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

INTRODUCTION
AFTER NEARLY 3 DECADES OF PROVIDING EXCELLENT SERVICE
AND VALUE FOR MONEY, KING LIFTING IS TODAY THE LEADING
CRANE HIRE, HEAVY LIFT, MACHINERY MOVEMENT AND TRANSPORT
SPECIALIST IN THE UNITED KINGDOM.
Operating an extensive and modern fleet of vehicles & equipment from a network of
depots across the UK, has always allowed King Lifting to meet and exceed customers
expectations. The fleet includes all-terrain and city class cranes, mobile and pedestrian
operated tower cranes together with semi low & low loaders, flatbed vehicles fitted with
lorry loaders and highly specialised plant & machinery movement equipment.
The accreditation of our Quality Management System to BS EN ISO
9001:2001 is not only a sign of the company's effectiveness but is a
guarantee of consistently high standards of service.
King Lifting as an Environmentally Friendly company operate an Environment
Management System which complies to the requirements of BS EN ISO
14001:2004.
We are members of the Construction Plant-hire Association Freight Transport Association
are a CPCS Construction Plant Competence Scheme accredited Test Centre and maintain
both internal and external consultants to assist with all aspects of Health and Safety,
Environmental and Employment Law.
At King Lifting we are totally committed to ensuring the safety of our customers,
employees and the public. We continue to promote a safety culture and invest in the
highest levels of training and equipment for all our employees.
If you choose to undertake the lifting operations on a CPA Crane Hire only basis, ‘BS 7121
- Safe Use of Cranes’ and recommendations from the Health and Safety Executive place
the responsibility of providing a suitably qualified and experienced Appointed Person on
the customer. The Appointed Person is responsible for planning the lift and preparing the
necessary method statement and risk assessments prior to the commencement of the
lifting operation.
In this high risk industry King Lifting recommend that customers who are not experienced
in hiring cranes and therefore not aware of the responsibilities, duties and risks involved,
take advantage of our CPA Contract Lift service.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEPOTS
Bristol Depot
KING LIFTING KING LIFTING
Thirdway, Avonmouth,
Bristol, BS11 9YL
T: 01179 821121 F: 01179 235762

KING LIFTING
BIRMINGHAM Depot
Aden Court, Coventry Road
Solihull, West Midlands, B92 0DY
T: 01675 446 840 F: 01675 443 457

KING LIFTING
Southampton Depot
Unit 3, Oceanic Way, Marchwood Industrial Park,
Marchwood, Southampton, SO40 4BD
T: 02380 661384 F: 02380 661494

KING LIFTING
South Wales Depot
Tir-y-berth Industrial Est, Tir-y-berth,
Hengoed, Mid Glamorgan, CF82 8AU
T: 01443 812457 F: 01443 814143

KING LIFTING
Swindon Depot
Darby Close, Cheney Manor Industrial Est,
Swindon, SN2 2PN
T: 01793 542740 F: 01793 514837

KING LIFTING
london (West) Depot
Stockley Farm Road, Stockley Park,
West Drayton, UB7 9BW
T: 01895 446443 F: 01895 446449

KING LIFTING
london (east) Depot
Albion Parade, Canal Basin, Gravesend,
Kent, DA12 2RN
T: 01474 321721 F: 01474 321821

KING LIFTING
YEOVIL Depot
Westlands, Lysander Road, Yeovil, BA20 2YB
T: 07774 338336 F: 01935 704843

'big enough to cope, small enough to care'


KING LIFTING Limited
Head Office: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk Depots aCROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CAUTION
UNLESS YOU UNDERSTAND
THE REQUIREMENTS
CONTAINED IN THIS
GUIDE, WE WOULD
RECOMMEND
YOU CHOOSE A
CONTRACT LIFT.

DISCLAIMER
The configurations and duties for the cranes included in this specification
are too numerous to include fully. The charts that have been included have
been reproduced from manufacturer specifications, and while every effort
has been made to ensure their accuracy, we do not accept any responsibility
for errors or omissions.
We also need to draw your attention to the guidance notes to assist you with your
crane selection.
All aspects of this document are for guidance purposes only.
If you have any queries regarding the content or you require more extensive specifications
please contact your nearest depot or alternatively the technical department on
0117 982 1121.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEFINITION OF CPA CRANE HIRE


AND CPA CONTRACT LIFT
INTRODUCTION
The guide clarifies the contractual arrangement, duties, responsibilities and risks involved when
hiring mobile cranes.
The Lifting Operations and Lifting Equipment regulations 1998 (LOLER) provide details of the
statutory provisions for lifting operations. This is supported by the code of practice British Standard
Safe Use of Cranes: BS7121 and in particular parts 1 and 3. Both of these documents clearly define
the qualifications and duties of all personal involved.

TRAINING
The importance of correctly trained and certified personnel is critical King Lifting is committed
to training and conducts regular training courses for employees and customers we are an CPCS
accredited test and training centre.
Employees can contact our Health and Safety Department and customers should contact our
training services on 0117 982 1121.

INSURANCE
The hire of any item of plant or equipment is inevitably accompanied by risk- either through accidental
damage, theft or misuse. With the cost of modern mobile cranes ranging from £100,000 to over £2.5
million, the financial implications for customers in the event of a serious incident are significant.
BS7121- Safe Use of Cranes- notes these risks and highlights the need to protect against their
consequences through appropriate comprehensive insurance cover. A factor which is now
considered by many customers to be as important as the specification of equipment.
We at King Lifting are able to offer a damage waiver which is specifically tailored to the crane hire
market at an increased cost and rely on own insurances.
Damage Waiver Scheme For CPA Crane Hire Only.
CPA Crane tire waives the right of recovery under Clause 13 of the CPA Model Conditions of Hire
“Hirer’s Responsibility for Loss and Damage” at 16.5% of invoice value:
• Accidental damage to crane on hire to full replacement value.
• Loss of hire charges as a result of loss or damage to the crane.
• Cover in respect of goods being lifted up to a value of £25,000.
Limit can be increased on request and the appropriate charge made.
NB: Excesses and exclusions apply.

Insurance Cover arranged by us for use in respect of CPA Contract Lift


Insurance is included within the contract lift price subject to following limits:
• A maximum liability of £25,000 in respect of goods lifted;
• A maximum liability of £5 million in respect of loss or damage to other property
or death/injury to persons (Public Liability).
NB: Exclusions apply.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEFINITION OF CPA CRANE HIRE


AND CPA CONTRACT LIFT
CPA CRANE HIRE
Under the terms of a standard CPA Crane Hire agreement, the crane and the operator are the
responsibility of the customer once the crane leaves the public highway in order to access site.
This includes travel on any access roads in the event that the site is not immediately adjacent to the
public highway.
The Customer’s Appointed Person is responsible for planning the lift and all the personnel and
equipment involved. In addition, under CPA Model conditions, the Customer is responsible for and
we recommend should provide for the following:
• Loss or damage to our plant and equipment whilst on site and under the
customer’s control;
• Loss of or damage to the goods being lifted;
• Continuing hiring charges whilst the equipment is unable to work as a result of
loss or damage;
• Legal Liability-injury to the driver/operator whilst under the supervision and control of
the Customer along with injury to third parties, including damage to their property,
arising from crane operations.
For hires under CPA Crane Hire agreements, it is important to note the following:
• The Customer’s Appointed Person must have the knowledge and understanding of all
aspects of the lifting operation;
• The Crane Owner must supply a competent operator and crane fit for the intended
purpose, BS7121- Safe use of Cranes gives a full description of such responsibilities.
If you wish your responsibilities to be waived an additional charge will be levied.
In summary, under a CPA Crane Hire agreement, it is the customer’s responsibility to fully plan,
control, supervise and insure the crane operation and personnel.

CPA CONTRACT LIFT


Under the terms of standard CPA Contract Lift, the crane/equipment, operator and all personnel
supplied with the crane, (including the Appointed Person/Crane Supervisor) are the responsibility of
the Crane Owner.
The Crane Owner is responsible for all aspects of the planning and execution of the lift and will be
insured for the following:
• Loss of or damage to plant/equipment caused solely by the owner’s negligence in the
performance of lifting contract;
• Loss of or damage to third party property caused solely by the owner’s negligence in
the performance of the lifting contract subject to:
A maximum liability of £25,000 in respect of goods being lifted;
A maximum liability of £5 million in respect of loss of or damage to third party
property or death/injury to third party persons.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEFINITION OF CPA CRANE HIRE


AND CPA CONTRACT LIFT
CPA CONTRACT LIFT
If you wish our limits to be increased an additional charge will be payable.
It is important to note that a CPA Crane Hire agreement only becomes a CPA Contract Lift when
the crane owner supplies the Appointed Person/Crane Supervisor and hence, accepts liability for
planning and supervising the lift.
Specifying the correct type of contract will ultimately improve safety and ensure that the correct
system of work is adopted.
Under Contract Lift conditions the Customer still retains certain liabilities and therefore should hold
adequate insurance to provide protection against incidents arising from:
• Own negligence;
• Inadequate or unstable ground conditions;
• Inadequate or incorrect information supplied in connection with the goods being lifted.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MANAGEMENT & SUPERVISION FOR


SAFE LIFTING OPERATIONS
A SUMMARY OF CONTRACT LIFTING
If an individual or organisation does not have expertise in lifting operations they should not hire
cranes but should opt for the contract lift option.

EMPLOYING ORGANISATION
The organisation requiring the load to be moved

HIRED CRANE (Hired & Managed) CONTRACT LIFT (Fully Contracted)

THE EMPLOYING THE EMPLOYING ORGANISATION


ORGANISATION MUST: SHOULD SPECIFY:
• Carry out all work in accordance • That all work is to be undertaken in
with BS7121. accordance with BS7121.
• Supply the “Appointed Person”. • That the contractor is to supply the
• Plan the lift and operate a safe system “Appointed Person”.
of work. • What information and/or services will be
• Ensure that the crane hired is of a provided to the contractor by the
suitable type and capacity. employing organisation.
• Check the credentials of the crane hire
THE CONTRACTOR IS
company and certifications supplied.
RESPONSIBLE FOR:
THE CRANE OWNER HAS A • Supplying the “Appointed person”
DUTY TO: • Planning the lift, and operation of a safe
• Provided a crane that is properly system of work (via method statement).
maintained, tested and certificated. • Organisation and control of the
• Provide a competent driver. lifting operation.

HSE INSPECTORS WILL EXPECT TO FIND


• Llifting operations planned by trained, competent and appointed person(s);
• Lifting plan/method statement prepared as part of the project H&S Plan;
• Responsibilities established: clarity as to whether contact or crane hire terms apply;
• Crane outrigger support assessed i.e. identify loadings and load-bearing capacity of the ground;
• Slinging arrangements planned and slinging undertaken by trained and competent persons;
• Lifting operations supervised by trained persons and carried out in accordance with the lifting plan;
• Maintenance of machines and equipment supported by up to date examination reports.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MANAGEMENT & SUPERVISION FOR


SAFE LIFTING OPERATIONS
MANAGEMENT & SUPERVISION FOR SAFE LIFTING OPERATIONS
Know your Lift Team Appointed Person, Crane Supervisor, Crane
Operator and Slinger/Signaller
Ensure that your Lift Team is Trained, competent and authorised
Know your Load Weight, dimensions, type, lift points,
location before and after up/down, hot,
cold, sharp edges
Know your crane Size, type, duties, outrigger settings and
loadings, boom length, radius of work,
area for erection
Ensure that your crane is Tested, examined, inspected, fit for purpose
Know your ground Access, egress, level, sloping, excavations,
condition, load bearing
Know your proximity hazards Electrical structures, stacked goods,
pedestrians, overhead racks and trays
Know the weather Wind, rain, ice and snow, fog,
sun, thunderstorms
Permit to work Safe System of Work (Method Statement)

Remember-all lifting operations must be;


“Properly Planned, Appropriately Supervised and Carried out Safely”
(Lifting Operations and Lifting Equipment Regulations 1998 Regulation 8)

1. APPOINTED PERSON
The role of the Appointed Person, as defined by BS7121 part 1, is to provide a safe system of work
for all lifting operations which are properly planned and adequately supervised. This includes the
preparation of a comprehensive risk assessment and an adequate method statement. As well as
selecting the correct crane for the lift the Appointed person must also select the appropriate load
handling accessories (chains, slings, webs etc.), the method of attaching the load to the crane (the
slinging technique) and calculate the down rating of the accessories where necessary to ensure a
safe operation.

2. CRANE SUPERVISOR
The crane supervisor should direct and supervise the lifting operation, ensuring that these are
carried out in accordance with the method statement. The crane supervisor should be competent
and suitably trained and should have sufficient authority to stop the lifting operation if the supervisor
considers it dangerous to proceed.
NOTE: The appointed person may decide to undertake the duties of the crane supervisor or to delegate these to another person with
appropriate expertise for the lifting operation.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MANAGEMENT & SUPERVISION FOR


SAFE LIFTING OPERATIONS
3. CRANE OPERATOR
The crane operator should be responsible for correct operation of the crane in accordance with the
manufacturer’s instructions and within the safe system of work. The crane driver should only respond
to a signal from the slinger to carry put initial lifting of the load, and then only to signals from one
slinger/signaller, who should be easily identified, during the remainder of the lifting operation.
WARNING: It is essential that the crane driver does not tamper with any controls, mechanisms or
other equipment, including the rated capacity indicator.
The crane operator should be:
• Trained on the specific model of crane used;
• Able to assimilate and apply information contained in reports and duty charts relating
to the range of duties and safe use of the crane;
• Familiar with the manufacturer’s instructions for the rigging operation and for
maintenance of the crane;
• Aware that the crane should be used on level ground or else set level on outriggers
before any load is applied;
• Fully conversant with the correct use of outriggers and where outriggers should
be fitted, and aware of how to properly support the outrigger feet (this requires
regular monitoring to ensure that no movement occurs throughout the operation);
• Able to set and check the functioning of the rated capacity limiter and rated
capacity indicator;
• Aware of the effects of wind and other climactic effects on the crane and load;
• Able to resist pressures from other persons to carry out unsafe operations;
• Able to take the action to avoid dangerous situations, including stopping operations;
• Able to operate fire suppressant equipment, if fitted.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MANAGEMENT & SUPERVISION FOR


SAFE LIFTING OPERATIONS
4. SIGNALLER
The signaller should be responsible for relaying the signal from the slinger to the crane driver. The
signaller may be responsible for directing movement of the crane and load instead of the slinger,
provided that only one person is responsible at any time.
During the lifting operation, hand signals and voice instructions to the crane driver should be given
by only one person at a time. If, during the lifting operation, responsibility for directing the crane and
load is transferred to another signaller, the first signaller should clearly indicate to the crane driver
that this responsibility is transferred and to whom. The first signaller should clearly indicate to the
second signaller that the transfer is taking place. The crane driver and the second signaller should
clearly indicate that they accept the transfer.
NOTE: It is common practice to train personnel to enable them to carry out duties of both slinger and signaller.

5. SLINGER
The slinger should be responsible for attaching and detaching the load to and from the crane load
lifting attachment, and for using the correct lifting accessories and equipment in accordance with
the operation plan.
The slinger should direct initial movement of the crane. If there is more than one slinger, only one
slinger should direct initial movement.
If continuous signalling is required and the slinger is not visible to the crane driver, another slinger or
signaller should relay the signals to the crane driver.
NOTE: Alternatively, other audio or visual methods may be used. If other audio or visual methods are used, the equipment or means
of equipment use should be so that the crane driver can become immediately aware if equipment fails, so that movement of the crane
can be stopped.

The following indications of equipment failure should cause the crane driver to immediately stop
movements of the crane:
• Blank screen on a television monitor;
• Cessation of continuous instructions from a signaller using radio,
to e.g. “lower...lower...lower” etc;
NOTE: If radio is used as means of signalling, then selected personnel involved should be kept clear of other communications. All
personnel involved in signalling should be given a clear and unique call sign and all communications should be preceded by the call
sign. The crane driver should not respond to signals not preceded by the call sign.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS


DETERMINING PERMISSIBLE GROUND LOADINGS
RESPONSIBILITY
The Appointed Person is responsible for ensuring the ground conditions are suitable to set up and
operate the crane, and therefore safely carry out the lifting operation.
In most cases the Appointed Person’s role has 3 stages:
• Ensure that accurate data is obtained in respect of the imposed loadings.
• Ensure that this data had been assessed by a suitably competent person,
such that suitable support systems have been specified.
• Ensure that the specified system of support has been correctly installed
and maintained.

SOURCES OF INFORMATION
• Under the Construction (Design and Management) Regulations, the client and the
designer have a duty to make available to the Planning Supervisor information
relating to the site.
• If this is not available the ground conditions should be assessed by a suitably
competent engineer, who may have top be a specialist Geotechnical Engineer.
• In extreme cases physical load tests may have to be carried out in advance of the
lifting operation, to verify the load bearing capability of the ground.

METHODS OF DISTRIBUTING LOADS


The standard outrigger support equipment carried by most crane suppliers has been proven by
experience to provide effective load distribution in the majority of cases.
However, in certain situations additional load distribution is required to achieve acceptable ground
bearing pressures.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS


PERMISSIBLE GROUND PRESSURES (SOURCE: DIN 1054)

t/m2

Backfilled Ground,
not compacted 0 to 10.0

Mud, Peat, Marsh 0

Non-Cohesive Ground - medium to fine gravel 15


- course sand gravel 20

Cohesive Ground - mushy 0


- soft 4.0
- firm 10.0
- semi solid 20.0
- hard 40.0
Rock 150.0 to 300.0

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS


DETERMINING GROUND CONDITIONS
In order to determine the support arrangements required for a crane, it will be necessary to
gather some information about the ground conditions on site.
It will be necessary to know:
• The character of the ground
• The water conditions
• The engineering properties of the ground relevant to the design of the foundations
• The location of any underground hazards

SITE CATEGORIES
Sites can be categorised to highlight the most likely potential problems that need to be considered.
More attention is required to establish the strength of the ground where ground conditions are poor
or where there is lack of data on the nature of the sub-soil.

BEACHES
• Low sand density and/or high/variable water table create difficult conditions.

FILLED CONSTRUCTION SITES (BROWNFIELD)


• Unknown previous conditions, e.g. basements, poorly filled open pits, storage tanks,
variable and compacted fill.

PAVED AREAS
• These can look deceptively strong but may have been laid on week
ground underneath.
• If a road is used regularly by heavy commercial vehicles and shows no sign of
distress then it will be less of a concern than a lightly trafficked car park
or estate road.
• Footpaths always demand further investigations Edges of paved areas are usually
weak as there may be weaker material or shallow services underneath thin surfacing.

TOWN CENTRE AREAS/SITES


Expect underground hazards e.g. basements, sewers, tunnels, live services, poorly back filled
trenches, manholes, inspection chambers etc.
Rule of thumb: A rule of thumb to check for settlement of support area, raise the boom to minimum
radius and slew 360o and pause momentarily over each outrigger. Any settlement will require a larger
support base or ground improvement.
NOTE: Crane Operators are not, nor are they meant to be Geotechnical Engineers. On many sites an operators experience and
expertise will determine a safe crane set up. However if doubt exists the Appointed Person must be contacted or a suitable engineer
to determine the continuing suitability of any ground.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS


FACTORS OF SAFETY (FOS)
The following charts give foundation areas for a range of Factors of Safety against bearing failure and
excessive settlement of the ground.
FOS of 3.0 is more normally used for permanent work foundations and will give a conservative size
of foundation area. It should be used for outrigger foundations where minimum ground information
is available, where soils are variable or where minor settlements could be critical to a precision lifting
and placing operation.
FOS of 2.0 is adequate for most situations.
FOS of 1.5 is the absolute minimum and should only be used where ground conditions have been
accurately identified under the guidance of an experienced
geotechnical engineer.

OUTRIGGER FOUNDATION AREAS


GRANULAR SOILS

• If only general information on the soil type is available use the upper limit of the
bands shown.
• Where groundwater is at a depth B or less below the level of the foundation, or the
site is liable to flooding, then the above foundation areas should be doubled.
(B is the width of the foundation).

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS


OUTRIGGER FOUNDATION AREAS
COHESIVE SOILS

• If only genral information on the soil type is available use the uppoer limit of the
bands shown.
• If the site is liable to flooding, then the above foundation areas should be increased by 50%
• If the foundation is NOT approximately square in plan, but is rectangular then the above
foundation areas should be increased by 10% (B/L should not exceed 0.5 where B is the width
of the foundation and L is the length of foundation.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS


MAT FOR MOBILE CRANE OUTRIGGER DATA
CRANE: 30 tonne capacity truck-mounted mobile.
SIZE OF OUTRIGGER PADS: 400 x 400mm
MAXIMUM OUTRIGGER LOAD: Take 33 tonnes-i.e. approx 330 kN
GROUND: Dense to very dense sandy gravel

EXAMPLE

REQUIRED SIZE OF MAT


Using factor of safety = 2, and ø = 40˚, area of mat required + 0.9m2.
For granular soil, this area can be square or rectangular; try 3 no. sleepers wide x 1200mm long
i.e 750mm x 1200mm i.e area = 0.75 x 1.2 = 0.9m2.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS


CALCULATION OF AREA OF RECTANGULAR/SQUARE MAT
Area of Mat = Length x Width
EXAMPLE: A crane outrigger mat measures 2.4m in length x 1.2m in width
Area of mat is 2.4 x 1.2 = 2.88m2

CALCULATION OF AREA OF CIRCULAR MAT


Area of Mat = π X R2
π = 3.14 R2 = R X R
EXAMPLE: Mat Diameter is 0.9m
Radius = 0.9m/2 = 0.45m
R2 = 0.45 x 0.45 = 0.21
Area of Mat is 3.14 x 0.21 = 0.66m2

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS


45˚ OUTRIGGER LOAD - SIMPLE EXPLANATION

When two lower mats (a) are placed side by side, the upper mat (b) that covers the
lower mats must extend beyond the centre line.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ASSESSING GROUND CONDITIONS

The guidelines given above apply both to work adjacent to permanent structures and to work near
to temporary works, e.g. sheet pile retaining walls, trench support systems, etc.

FINAL SITING CHECKS


Even when mats have been correctly dimensioned, care must be exercised so that outriggers or
tracks avoid dangerous positions.
The following figure gives guidelines for positioning so that stability is not compromised.
If a crane operator or lift supervisor find themselves needing to set up within the
“Danger Areas” further engineering consideration must be given to the problem before moving the
crane into these areas.
If you are in a “Danger Area” do not lift without an engineering assessment being made by a
competent engineer. These areas apply to crawler cranes, lorry mounted telescopic cranes or any
other heavy plant.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SELECTING AND SAFE USE OF


LIFTING ACCESSORIES
ALWAYS
• Plan the lift, establish the weight of the load and prepare the landing area ensuring
that it will take the weight.
• Check slings and equipment are free of damage, use slings/slinging method suitable
for the load and protect slings from sharp edges and corners.
• Attach the slings securely to the load and appliance and position hook to
face outwards.
• Keep fingers and toes etc clear when tensioning slings and when landing loads.
• Ensure the load to be lifted is free.
• Make a trial lift and trial lower.

NEVER
• Use damaged slings or accessories.
• Twist or knot a sling.
• Hammer slings into position.
• Overload slings due to the weight of the load or mode of use.
• Trap slings when landing the load.
• Drag slings over floors etc, or attempt to pull trapped slings from under loads.
• Allow personal to ride on loads.

SLING CONFIGURATION AND RATING


Slings are available in single, two, three and four leg or endless form. In practice it will be found that
chain, wire rope and fibre rope slings are available in any of these configurations but the flat woven
sling is limited to single leg and endless, whilst the roundsling is supplied in endless form.
The maximum load that the sling may lift in use is governed by the slinging arrangement (mode of use)
and may vary from the marked SWL. In the case of textile slings the SWL for the various modes of
use is usually given on the information label. In other cases it will be necessary to multiply the marked
SWL by a mode factor. The following three simple rules will ensure that the sling is not overloaded.
In some cases this will mean that the sling is under utilized although this is unlikely to hinder the user
unduly. Where the maximum utilization is required reference should be made to a competent person
who understands the factors involved and who can perform the necessary calculations.
1. For a straight lift never exceed the marked SWL and in cases of multi-leg slings the specified angle
or range of angles.
2. When using slings in a choke hitch, multiply the maximum SWL by 0.8 to obtain the reduced
maximum SWL the sling may lift.
3. With multi leg slings when using less than the full number of legs, reduce the maximum load in
proportion to the number of legs in use. Simply multiply the marked SWL by the number of legs in
use expressed as a fraction of the total, thus
• 1 leg of a two leg sling in used = 1/2 marked SWL
• 3 legs of a four leg sling being used = 3/4 marked SWL and so on.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SELECTING AND SAFE USE OF


LIFTING ACCESSORIES
OPERATIVE TRAINING
Trained operatives who understand the methods of rating and application of mode factors should
only use slings.

SAFE USE OF SLINGS


Good slinging practice must ensure that the load is a safe and secure in the air as it was on the
ground, and that no harm is done to the load, lifting equipment, other property or persons.
Establish the weight of the load and ensure the lifting method is suitable and inspect the sling and
attachments for obvious defects. Prepare the landing area making sure the floor is strong enough to
take the load, follow any specific instructions from the supplier.
Ensure the lifting point is over the centre of gravity of the load, any loose part of the load should be
removed or secured.
Secure the sling firmly to the load by hooks onto lifting points or shackles etc. The sling must not be
twisted, knotted or kinked in any way. Use packing to prevent damage to the sling from corners or
edges and to protect the load.

A GENERAL PURPOSE SLINGING PRACTICE


Do not exceed the SWL or rated angle, any choke angle must not exceed 120˚ and any basket angle
must not exceed 90˚.
Do not force, hammer or wedge slings or accessories into position, they just fit freely.
When attaching more than one sling to a hook of an appliance use a shackle to join the slings and
avoid overcrowding of the hook.
Use an established code of signals to instruct the crane operator, ensure that the load is free to be
lifted and not for example bolted down. Check that there are no overhead obstacles such as power
lines. Where appropriate use a tag line to control the load. Except where special provision is made,
do not allow anyone to [pass under or ride on the load, the area should always be kept clear.
Keep fingers and toes etc clear ensuring they do not become trapped when lifting or lowering or
controlling loads.
Make a trial lift and set down, ensuring the sling will not become trapped. Use supports, which are
strong enough to sustain the load.
Never drag slings over floors etc, or attempt to drag a load. Place the hooks of free legs onto the
master link and take care to ensure that empty hooks do not become
accidentally engaged.
Never use slings, which may become in contact with chemicals or hat without the manufacturers
approval. Never use damaged or contaminated slings.
On completion of the lift return all equipment to proper storage.
This information is of a general nature and should always be read in conjunction with manufacturers instructions.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SELECTING AND SAFE USE OF


LIFTING ACCESSORIES
LIFTING ACCESSORIES
The following pages contain examples of test certificates for accessories, in addition to an example
of a 6 month thorough examination reports. Also included are simple formulas to enable an appointed
person to calculate the correct minimum SWL for various types of lifting accessories in general use,
which, together with various charts will form a useful reference for an appointed person.

CHAIN SLINGS

WIRE ROPE SLINGS

POLYESTER SLINGS

D AND BOW SHACKLES

LIFTING BEAMS

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SELECTING AND SAFE USE OF


LIFTING ACCESSORIES
DISTANCE BETWEEN LIFTING POINTS AFFECTS THE SLINGS ANGLES

30O
Half leg length = 30o

60O
Equal to leg length = 60o

90O
1.4 times the leg length = 90o
Maximum recommended included angle

120O
One & two thirds times leg length = 120o
For special application only

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SELECTING AND SAFE USE OF


LIFTING ACCESSORIES
SLING ANGLES
When lifting with multi-legs slings, they are rated at a certain tonnage from 0O to 90O and this SWL
should NOT be exceeded even if the angle is less than 90O. When using single slings in pairs
however, you must always be aware of the increased loadings in the slings when lifting at an angle.

0.5 TONNE
each Sling
0.53 TONNE
each Sling
0.58 TONNE
each Sling
0.7 TONNE
each Sling
1.0 TONNE
each Sling
6.0 TONNE
each Sling

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SELECTING AND SAFE USE OF


LIFTING ACCESSORIES
SAFE WORKING LOADS - (SINGLE ACCESSORIES)
Single chain slings, wire ropes and shackles have all been given a S.W.L. for use in a
vertical application.
When using single accessories inclined to each other, the maximum included angle of 90 degrees
(alpha angle) or 45 degrees beta angle should not be exceeded.
To allow for the increasing leg tension (stress/force) we as users are required to obtain a
revised S.W.L.
For inclined lifting using single items, (gear/tackle) - the following uniform load method should
be used.
The S.W.L. for 2 vertically rated accessories to be used for inclined loading can be calculated by
using the following simple formula.
The factor of 1.4 x the S.W.L. of 1 accessory will give the total load that may be lifted by the 2
accessories together, as a pair.
• EG: 2 No 5 tonne S.W.L. Wire rope slings used at a 90O included angle have a combined
lifting capacity of :-
• 1.4 x 5 = 7 TONNES
The S.W.L. of 3 or more vertically rated single accessories to be used at inclined loadings, will be
calculated using the same method as above except for using a factor of 2.1.
• EG: 4 No 5 S.W.L. Tonne shackles used at a 90O included angle have a combined
lifting capacity of :-
• 2.1 x 5 = 10.5 Tonnes
The factor of 2.1 x the S.W.L. of 1 accessory will give the total load that may be lifted by the 3
or 4 accessories together, AS A SET.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SELECTING AND SAFE USE OF


LIFTING ACCESSORIES
DETERMINING THE SWL OF VERTICALLY RATED SINGLE ACCESSORIES,
WHERE THE WEIGHT OF THE LOAD IS KNOWN FOR INCLINED LOADINGS :- (INCLINED
ALPHA AND BETA ANGLE)
Using the following straightforward calculations it is easy to determine the MINIMUM correct S.W.L.
of the accessories.
2 Point lift using SINGLE accessories. 71% of load weight will give the MINIMUM S.W.L.
of each accessory.
EG: Load weight 10 tonnes therefore :- 71% of load =
71% of 10 Tonnes = 7.1 TONNES
To lift a 10 Tonne load on 2 single accessories, the S.W.L. of each accessory
must not be less than 7.1 TONNES
3 and 4 point lifting using single accessories.
50% of load weight will give the minimum S.W.L. of each accessory
EG: Load weight 20 Tonnes therefore :- 50% of load =
50% of 20 Tonnes = 10 TONNES
To lift a 20 Tonne load on 3 or 4 single accessories the S.W.L. of each accessory must not be less
than 10 Tonnes.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SELECTING AND SAFE USE OF


LIFTING ACCESSORIES
WORKING LOAD LIMITS
The Working Load Limits (WLL) listed in the tables below are the maximum weights which slings are designed to sustain in general
lifting service, according to the standard uniform load method of rating. In exceptionally hazardous conditions, or in any other
circumstances which might indicate a need for a WLL lower than the designed figure, the degree of hazard should be assessed by
a competent person and the working load limit adjusted accordingly. The WLL, which should be marked on the sling itself or on a
securely fixed metal tag, must not be exceeded in any circumstances.
ALL CAPACITIES ARE IN TONNES.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CALCULATION OF THE LOAD


EXAMPLE OF HOW TO CALCULATE THE PERCENTAGE OF CAPACITY USED
Note: The reduction for fly does not apply to all Cranes - please consult Spec Book to confirm.

TYPICAL EXAMPLE

CRANE CAPACITY DETAILS

Maximum Radius 24.0 metres


Weight of Load 20.0 tonnes
Slings/Shackles 0.6 tonnes
Lifting Beam 0.5 tonnes
Load Reduction for Fly 0.4 tonnes
Hock Block 1.8 tonnes
Total Load 23.3 tonnes
Capacity 25.5 tonnes
% of Capacity used 91.3

TYPICAL EXAMPLE

CRANE CAPACITY DETAILS FOR MAN BASKET

Man Basket 0.5 tonnes


Personnel - 2 No. 0.3 tonnes
Slings/Shackles 0.2 tonnes
Lifting Beam 0.5 tonnes
Load Reduction for Fly 1.3 tonnes
Hock Block 2.8 tonnes
Total Load 2.8 tonnes
100% Contingency 2.8 tonnes
Revised Load 5.6 tonnes
Capacity 6.0 tonnes
% of Capacity used 93.3

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CALCULATION OF THE LOAD


ESTIMATED WEIGHTS OF VARIOUS LOADS

MATERIAL TYPE WEIGHT in kg/m3

Oil 800
Magnesium 1750
Concrete 2440
Brickwork 2000
Water 1000
Steel 7700
Cast Iron 7200
Aluminium 2700
Earth 1600
Paper 1120
Copper 8800
Lead 11200
Soft Wood 600
Hard Wood 800
Greenheart 1200

1000kgs = 1 Tonne 2240lbs = 1 Ton


NOTE: The figures above represent an average weight which have been rounded for ease of use.
Figures may possibly change due to water content and composition.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIFTING PERSONNEL
MAN BASKET
Carriers should not be used in the following conditions:
• Winds exceeding 7m/s (15.6mph);
• Electrical storms;
• Snow or ice;
• Fog;
• Sleet; or
• Other weather conditions that could affect the safety of personnel.
Unintentional rotation of the carrier should be prevented (e.g. by using guide ropes or anchoring). The
means of preventing unintentional rotation should not inhibit any emergency procedures and should
not otherwise interfere with safe operation of the carrier.
Carriers should not be occupied while the crane is travelling.
Lifts should not be made on any other hoist lines of the crane while any person occupies a carrier
attached to the crane.
The crane, load lifting attachments and carrier should be inspected every day during use.

CAPACITY
The crane selected to lift the carrier should have a rated capacity on the fixed load lifting attachment
of at least twice the minimum rated capacity of the crane configuration in use.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CRANES WORKING NEAR AERODROMES


A GUIDE TO SAFE OPERATION OF CRANES IN THE VICINITY OF AERODROMES
• Aviation law, in particular The Air Navigation Order, makes it an offence to act
recklessly or negligently in a manner likely to endanger aircraft. BS 7121 Safe Use
of Cranes places a duty on all operators of cranes and other lifting equipment tom
comply with procedures when intending to work in the vicinity of aerodromes.
• The Appointed Person should consult the Aerodrome Manager for permission to
work if a crane is to be used within 6Kms of the Aerodrome measured from its
perimeter, and if its height exceeds 10m above ground level or that of the
surrounding structures, trees etc.
• The term “Aerodrome” includes Airports, Airfields and Heliports where aircraft and
helicopters land and take off. The unauthorised operation of cranes and other high
lifting equipment in the vicinity of such places could present a serious hazard to
aircraft and helicopters either as a physical obstruction or by interfering with
electronic precision guidance equipment.
• The risk to pilots and aircrew who are unaware of such equipment when flying could
result in an aircraft or helicopter colliding with such equipment resulting in an accident.
• The developer or crane operator should approach the Aerodrome concerned at least
one month in advance of requiring the use a crane or other tall construction
equipment to find out if there are any limitations and regulatory procedures that must
be agreed upon before work commences.
• At least three days prior to delivery of the crane the operator must report to the
Aerodrome with precise details of the crane or lifting equipment to be used on site
and applies for the permit to set up and use the specified equipment. Information
must be provided on the type of crane that is to be used Tower or Mobile, the length
and radius of operation of the boom, the area of operation along with
intended times and dates of operations, applicants name and contact details for the
crane when operating.
• The permit will set out the criteria and any specific restrictions. A copy of the permit
must remain with the crane operator for the duration of the lifting operation and must
be produced if requested by an Aerodrome, CAA official or a Police Officer.
• Once these details have been considered it will be determined as to whether the
operation can proceed, any of the following conditions may be imposed.
• The fitting of red obstacle lights normally they will be steady red lights of either 200
or 2000 candelas depending on height and visible throughout 360 degrees.
• Restrictions on crane operating times.
• Crane operations dependant on the runways in use.
• Restrictions on crane operating height.
• Restrictions during periods of poor visibility, this may require the boom to be lowered
or positioned in a particular direction.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CRANE WORKING IN THE VICINITY


OF OVERHEAD POWER LINES
ELECTRIC LINES - GUIDANCE NOTES

WARNING: All overhead lines and other electrical apparatus should be treated as live unless declared
“dead” and “safe” by the line operator. If in doubt, seek advice from your operations manager.
If the crane makes contact with live electric line or cable, observe the following precautions: Ref: BS
7121 Safe Use of Cranes:-
• Remains inside cab.
• Warn all other personnel to keep away from the crane and not to touch any part of
the crane, rope or load.
• Try, unaided, and without anyone approaching the machine, to move the crane until it
is clear of the power line or cable.
• If the machine cannot be moved away, remain inside the cab. If possible, get
someone to inform the electricity supply authority at once.
Take no action until it has been confirmed that the conditions are safe.
• If it essential to leave the cab because of fire or some other reason, jump clear as far
away from the crane as possible. Do not touch the crane and the ground at the
same time.
• Inform the responsible engineer of the works or authority concerned of the situation
immediately, and until assistance is received someone should remain near the crane
to warn of the danger.

HEALTH AND SAFETY AT WORK ETC. ACT 1974


SECTION 7: It shall be the duty of every employee while at work - to take reasonable care for the
health and safety of himself and of other persons who may be affected by his acts or omissions
at work.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

WIND SPEED
BEAUFORT SCALE - WIND VELOCITY TABLE
This chart is intended as a general guide only - all conversion calculations are rounded to the nearest
whole number. Accurate details relating to working conditions for individual Cranes must be obtained
by reference to Crane Specification Manuals or other bulletins issued by the Manufacturer of the
crane concerned. Please note-stricter wind speed tolerances apply to cranes of over 200 tonnes
lifting capacity.
Note: As a general guide most Cranes working on Main Boom operate to 9.8 m/s.
For cranes working on Fly Jib and Luffing Fly Jib, this figure is greatly reduced.
For further information contact the Technical Department.

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

RECOGNISED CRANE HAND SIGNALS

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GUIDANCE NOTES
Please take note of the following guidelines which will assist in the assessment of suitable cranage for various lifting applications.
It is important that all relevant load reductions are applied.

LOAD CHART REDUCTIONS


• At all times the weight of the hookblock and all other load handling accessories is
considered part of the load and suitable allowance for them should be made.
• Where a crane has twin hoist facility two hookblocks may be fitted. An allowance for
the combined weight of the hookblocks should be made.
• Where a crane carries a fly jib stowed on the main boom (underslung or side mounted)
the safe working load should be reduced to allow for the additional weight. The relevant
load reductions are included in the specification guide. This is not the case however
with cranes manufactured by Jones, Tadano and Kato, where the safe working load has
been calculated with the fly jib carried in the stowed position.
• When using the main boom with any form or fly jib installed an allowance for both
the fly jib and hookblock should be added to the weight of the load, please contact
your nearest depot for further guidance.

LIFTING HEIGHT CHART


• A generic lifting height chart has been including to assist with the assesment of
boom required for the lifting operation (see next page).

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIFTING HEIGHT CHART

KING LIFTING www.kinglifting.co.uk


PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CRANE HIRE
KING LIFTING King Lifting operate a modern
fleet of over 100 All Terrain
and Tower and Crawler cranes
with capacities from 8 tonnes
upwards.
All our machines are operated by CPCS
qualified and competent personnel,
ensuring our ability to tackle all types of
lifting, regardless of restricted accesss or
stringent timetable.
If your orgainisation does not have
expertise in lifting operations you
should consider a Contract Lift. Further
information is given in Contract Lifting.

Modern All Terrain/City Class fleet


8-500t capacities
Lift consultancy facilities
Full 3D CAD facilities
Road traffic management
Spreader beams, mats
and trackway
Mobile and self erecting
tower cranes
Mini crawler and compact cranes

'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'


KING LIFTING LIMITED
HEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CONTRACT
KING LIFTING LIFTING
Contract Lifting enables you to
reduce risk by contracting out
the planning and supervision of
the lifting operation.
King Lifting provide a full Contract
Lifting service, which relieves you of
the responsibility of preparing a method
statement, risk assessment and managing
and supervising the lifting operation
ensuring that the whole operations
complies fully with BS7121.
When you request a Contract Lift, King
Lifting will provide you with a written
quotation covering all the planning,
management, craneage and our standard
insurance (details available on request).
We will then provide a method statement,
liftplan (with full 3D CAD imaging
available), craneage and operators, lifting
equipment and an Appointed Person to
assume responsibility for the mandatory
on-site requirements.

'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'


KING LIFTING LIMITED
HEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TADANO TS 75M/L
DIMENSIONS

8 Tonne
Outrigger fully extended are 4.4m wide
NOTES

Crane
• Total rated loads shown in the table are based on the condition that the crane is set on firm
ground horizontally. Those above bold lines are based on the crane strength and those below
on its stability.
• Total rated loads below the bold lines do not exceed 75% of tipping load.
• Each total rated loads includes weight of the hooks (65kg for 8 ton capacity, 20kg for
1.3 ton capacity), and slings.
• 50kg shall be subtracted from the rated lifting loads of the main boom, when single
top is attached to main boom head.
• Standard number of part lines for each boom length is as shown below. Load per line
should not surpass 1,230kg for main winch and 1,300kg for auxiliary winch.
Boom length (m) 6,6m 11,5m 16,4m 21,3m Single top
No. of part lines 7*/6 4 4 4 1
*This is the case in which the single top is made into use together with the main hoist reeving system
• For total rated load of songle top, reduce load shown in the following table from the
relevent total rated load. Total rated loads of single top should not exceed 1,300kg.

HOOKBLOCK

Boom Length 6,6m 11,5m 16,4m 21,3m Vehicle weight 9,560kg


Reductions 0kg 30kg 40kg 50kg
Overall width 2,230*mm
Tail swing radius 1,600 mm
LOAD REDUCTIONS
*These dimensions are shown as an example
Capacity 8te 1,3te when mounted on DAF carrier model FA1000.

Weight 65kg 20kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TADANO TS 75M/L
TOTAL RATED LOADS
DIN 15019.2 2-75%

OUTRIGGERS FULLY EXTENDED


Front jack* extended (360o) Front jack* not extended
Front jack* not extended (Over sides and rear)

8 Tonne
(Over sides and rear)

A 6,6m 11,5m 16,4m 21,3m 6,6m 11,5m 16,4m 21,3m


B
2,3m 8,000 8,000
2,5m 7,000 7,000
3,0m 6,100 4,900 5,200 4,900
3,5m 5,300 4,600 3,500 3,800 3,900 3,500
4,0m 4,350 4,300 3,200 2,700 2,800 2,800
4,5m 3,600 3,700 3,000 2,000 1,900 2,100 2,100 2,000
5,0m 3,000 3,100 2,800 2,000 1,500 1,600 1,600 1,700
5,5m 2,550 2,650 2,600 1,850 1,200 1,300 1,300 1,350
6,0m 2,250 2,350 2,400 1,700 900 1,050 1,050 1,100

Crane
7,0m 1,800 1,850 1,450 750 750 800
8,0m 1,450 1,500 1,250 500 500 550
9,0m 1,200 1,250 1,100 350 350 400
10,0m 1,000 1,050 950 250 250 300
10,9m 850 850 850 150 150 200
12,0m 700 750
13,0m 600 650 A - Boom Length
14,0m 500 550 B - Working radius

15,0m 400 450


*Optional
15,8m 350 400
17,0m 350
Unit - Kg
18,0m 280
19,0m 230
20,0m 180
20,5m 150

WORKING AREA DIAGRAM

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

KATO CR-250 (CITY CRANE)


DIMENSIONS

25 Tonne
Crane
HOOKBLOCK
Vehicle weight 25,140kg Capacity 22te 4te
Weight 200kg 60kg

R1 = 8.30m (Minimum turning radius) R1 = 5.00m (Minimum turning radius)


R2 = 8.49m (Turning radius of extremely outer tire) R2 = 5.19m (Turning radius of extremely outer tire)
R3 = 9.25m (Chassis turning radius) R3 = 5.95m (Chassis turning radius)
R4 = 9.93m (Boom end turning radius) R4 = 6.77m (Boom end turning radius)

A = 4.85m (Width of entrance) A0 = 4.16m (Width of entrance)


B = 4.13m (Width of wheel exit) A1 = 3.48m (Width of wheel entrance)
C = 4.89m (Width of chassis exit) B = 3.44m (Width of wheel exit)
D = 5.56m (Width of exit at end of boom) C = 4.20m (Width of chassis exit)
D = 5.02m (Width of exit at end of boom)

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

KATO CR-250 (CITY CRANE)


MAIN BOOM DUTIES

Outriggers fully extended (6.0m) Outriggers intermediately extended (4.5m) Outriggers completely retracted
Working 360° full range 360° full range (Blocked on vertical cylinders) – 360° full range
Radius 6,7m 11,0 15,2 21,6 28,0 6,7m 11,0 15,2 21,6 28,0 6,7m 11,0 15,2 21,6 28,0
(m) Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Boom Bom
2,8 25,00 12,00 12,00 25,00 12,00 12,00 10,00 9,50 7,90
3,0 22,00 12,00 12,00 8,00 22,00 12,00 12,00 8,00 8,75 8,45 7,15 6,50

25 Tonne
3,5 20,00 12,00 12,00 8,00 20,00 12,00 12,00 8,00 6,60 6,30 5,65 5,45
4,0 17,00 12,00 12,00 8,00 6,50 17,00 12,00 12,00 8,00 6,50 5,10 4,85 4,55 4,55 4,25
4,5 15,00 12,00 12,00 8,00 6,50 15,00 12,00 12,00 8,00 6,50 4,10 3,85 3,70 3,80 3,65
5,0 12,00 12,00 8,00 6,50 12,00 12,00 8,00 6,50 3,10 3,00 3,20 3,15
5,5 12,00 12,00 8,00 6,50 9,80 9,70 8,00 6,50 2,50 2,40 2,70 2,70
6,0 12,00 11,50 8,00 6,50 8,20 8,10 8,00 6,50 2,05 1,95 2,30 2,35
6,5 11,30 10,60 8,00 6,50 7,00 6,85 7,25 6,50 1,60 1,55 1,95 2,00
7,0 10,15 9,90 7,85 6,50 6,00 5,95 6,55 6,50 1,25 1,20 1,65 1,75
8,0 7,90 7,80 7,10 5,90 4,60 4,50 5,10 5,40 0,70 0,60 1,15 1,30
9,0 6,20 6,10 6,35 5,35 3,60 3,45 4,05 4,40
10,0 4,90 5,45 4,80 2,65 3,30 3,60
11,0 4,00 4,60 4,30 2,05 2,65 3,00
12,0 3,25 3,85 3,85 1,55 2,15 2,50
13,0 3,65 3,30 3,50 1,15 1,75 2,10
14,0 2,80 3,10 1,40 1,75
15,0 2,35 2,70 1,15 1,45
16,0 2,00 2,35 0,90 1,20
17,0 1,70 2,00 0,70 0,95

Crane
18,0 1,45 1,75 0,50 0,80
19,0 1,20 1,50 0,35 0,60
20,0 (19,7m) 1,05 1,30 0,45
21,0 1,15 0,35
22,0 0,95
23,0 0,80
24,0 0,70
25,0 0,60
26,0 0,50
Standard for 25 ton for 22 ton for 25 ton for 22 ton for 25 ton for 22 ton
Hook (optional) (optional) (optional)
Hook Mass 200kg 200kg 200kg 200kg 200kg 200kg
Parts of Line 7 4 7 4 7 4
Critical – – – – – – – – – 35° – 20° 51° 62° 69°
Boom Angle

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

KATO CR-250 (CITY CRANE)


FLY JIB DUTIES

28.0m Boom + 5.4m Jib 28.0m Boom + 5.4m Jib


(Standard hook for 4.0 ton - Hook mass 60kg) (Standard hook for 4.0 ton - Hook mass 60kg)
Outriggers fully extended (6.0m) – 360° full range Outriggers intermediately extended (4.5m) – 360° full range
Offset 5° Offset 25° Offset 45° Offset 5° Offset 25° Offset 45°
Boom
Boom Working Load Working Load Working Load Angle Working Load Working Load Working Load
Angle (°) Radius (m) (t) Radius (m) (t) Radius (m) (t)

25 Tonne
(°) Radius (m) (t) Radius (m) (t) Radius (m) (t)
81,0 5,2 3,00 7,0 2,50 8,3 1,55
77,7 7,2 3,00 8,9 2,50 10,0 1,55 81,0 5,2 3,00 7,0 2,50 8,3 1,55
75,0 8,9 3,00 10,4 2,30 11,4 1,50 77,7 7,2 3,00 8,9 2,50 10,0 1,55
73,0 10,0 3,00 11,5 2,14 12,4 1,46 75,0 8,9 3,00 10,4 2,30 11,4 1,50
70,0 11,7 2,60 13,1 1,94 13,9 1,42 73,0 10,0 3,00 11,5 2,14 12,4 1,46
65,0 14,3 2,15 15,7 1,69 16,3 1,35 70,0 11,7 2,60 13,1 1,94 13,9 1,42
60,0 16,8 1,83 18,1 1,49 18,7 1,30
69,0 12,2 2,50 13,6 1,88 14,4 1,40
55,0 19,2 1,55 20,3 1,35 20,8 1,25
67,0 13,2 2,14 14,7 1,77 15,3 1,37
54,0 19,6 1,45 20,7 1,32 21,2 1,22
52,0 20,4 1,29 21,5 1,19 22,0 1,18 64,0 14,7 1,63 16,0 1,46 16,8 1,33
50,0 21,2 1,14 22,3 1,05 22,7 1,08 60,0 16,6 1,14 17,9 1,02 18,5 1,00
48,0 22,0 1,01 23,0 0,94 23,3 0,99 55,0 18,9 0,70 19,9 0,67 20,7 0,60
45,0 23,2 0,82 24,1 0,77 50,0 21,0 0,39 21,9 0,37
40,0 25,0 0,58 25,8 0,54 Critical

Crane
48° 48° 53°
Boom
35,0 26,6 0,40 27,2 0,38 Angle
Critical 33° 33° 46°
Boom Angle

28.0m Boom + 8.2m Jib 28.0m Boom + 8.2m Jib


(Standard hook for 4.0 ton - Hook mass 60kg) (Standard hook for 4.0 ton - Hook mass 60kg)
Outriggers fully extended (6.0m) – 360° full range Outriggers intermediately extended (4.5m) – 360° full range
Offset 5° Offset 25° Offset 45° Offset 5° Offset 25° Offset 45°
Boom
Boom Working Load Working Load Working Load Angle Working Load Working Load Working Load
Angle (°) Radius (m) (t) Radius (m) (t) Radius (m) (t)
(°) Radius (m) (t) Radius (m) (t) Radius (m) (t)
81,0 6,0 2,00 8,7 1,20 10,5 0,80
77,7 8,7 2,00 11,1 1,20 12,7 0,80 81,0 6,0 2,00 8,7 1,20 10,5 0,80
75,0 10,0 2,00 12,2 1,20 13,7 0,78 77,7 8,7 2,00 11,1 1,20 12,7 0,80
72,0 11,9 1,81 14,0 1,20 15,3 0,75 75,0 10,0 2,00 12,2 1,20 13,7 0,78
70,0 13,0 1,71 15,1 1,18 16,4 0,74 72,0 11,9 1,81 14,0 1,20 15,3 0,75
65,0 15,9 1,49 17,8 1,12 18,9 0,72 70,0 13,0 1,71 15,1 1,18 16,4 0,74
60,0 18,6 1,33 20,3 1,05 21,3 0,69
65,0 15,9 1,49 17,8 1,12 18,9 0,72
55,0 21,2 1,20 22,7 0,98 23,5 0,67
63,0 16,9 1,26 18,8 1,09 19,8 0,70
53,0 22,1 1,14 23,6 0,95 24,3 0,66
50,0 23,5 0,96 24,9 0,77 25,4 0,65 60,0 18,4 0,98 20,2 0,87 21,3 0,69
47,0 24,7 0,80 26,1 0,63 26,5 0,64 58,0 19,4 0,81 21,2 0,72 22,2 0,68
45,0 25,6 0,69 26,8 0,56 55,0 20,8 0,60 22,5 0,54 23,3 0,53
40,0 27,5 0,49 28,5 0,39 50,0 23,1 0,31
35,0 29,1 0,33 Critical 48° 53° 53°
Boom
Critical 33° 38° 45° Angle
Boom Angle

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

KATO CR-250 (CITY CRANE)


FREE ON WHEELS DUTIES

Stationary on rubber (without outriggers)


6.7m Boom 11.0m Boom 15.2m Boom
Working Over 360° Full Over 360° Full Over 360° Full
Radius (m) Front Range Front Range Front Range
3,0 6,00 5,50 5,20
3,5 8,50 4,50 8,50 4,10 8,00 3,80

25 Tonne
4,0 8,50 3,30 8,50 3,20 8,00 3,00
4,5 7,50 2,55 7,20 2,55 6,50 2,40
5,0 6,10 2,00 5,40 1,90
5,5 5,10 1,55 4,55 1,50
6,0 4,25 1,20 3,85 1,15
6,5 3,55 0,90 3,30 0,85
7,0 3,00 0,65 2,80
8,0 215 2,05
9,0 1,55 1,50
10,0 1,00
11,0 0,60
Standard Hook for 22 ton
Hook Mass 200kg
Parts of Line 6 4

Crane
Critical Boom – – – 30° 33° 57°
Angle

PICK AND CARRY DUTIES

Pick & Carry (less than 2km/h) (without outriggers)


6.7m Boom 11.0m Boom 15.2m Boom
Working Over 360° Full Over 360° Full Over 360° Full
Radius (m) Front Range Front Range Front Range
3,0 4,80 4,40 4,00
3,5 6,80 3,60 6,40 3,30 5,90 3,00
4,0 6,80 2,65 6,40 2,55 5,90 2,40
4,5 6,00 2,05 5,50 2,05 5,00 1,90
5,0 4,75 1,50 4,30 1,40
5,5 4,10 1,05 3,65 1,00
6,0 3,40 0,65 3,10 0,60
6,5 2,85 2,65
7,0 2,40 2,25
8,0 1,65 1,60
9,0 1,00 1,00
10,0 0,50
11,0
Standard Hook for 22 ton
Hook Mass 200kg
Parts of Line 6 4
Critical Boom – – – 42° 35° 60°
Angle

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC30 (CITY CRANE)


DIMENSIONS

HOOKBLOCK
Capacity 25,3te 10te 3,3te
30 Tonne
Crane
Vehicle weight 22,540kg
Weight 220kg 100kg 80kg
() with independent rear axle steering

LOAD REDUCTIONS
Boom Length 7,5m 11,9m 16,3m 20,7m 25,0m
(Citycrane) Reductions 400kg 270kg 190kg 150kg 120kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC30 (CITY CRANE)


LIFTING CAPACITIES MAIN BOOM DUTIES

5,95m x 5,90m — 360° Main Boom 5,95m x 2,25m — 360° Main Boom
7,5 11,9 16,3 20,7 25,0 7,5 11,9 16,3
Radius (m) (ton) (ton) (ton) (ton) (ton) Radius (m) (ton) (ton) (ton)
2,7 30,0 3,0 10,2 10,6 8,9
3,0 24,7 16,0 16,0 3,5 7,8 8,1 7,5

30 Tonne
3,5 22,3 16,0 16,0 13,0 4,0 6,2 6,5 6,5
4,0 20,3 16,0 16,0 13,0 4,5 5,1 5,3 5,5
4,5 18,3 16,0 16,0 13,0 5,0 4,5 4,6
5,0 16,0 15,8 13,0 9,0 6,0 3,3 3,4
6,0 13,6 13,6 12,2 9,0 7,0 2,6 2,6
7,0 10,5 10,7 10,0 8,8 8,0 2,0 2,1
8,0 8,2 8,4 8,4 7,8 9,0 1,6 1,7
9,0 6,7 6,8 6,9 6,7 10,0 1,4
10,0 5,7 5,8 5,8 12,0 0,9
12,0 4,1 4,2 4,2 Capacities
14,0 3,2 3,2 Charges 2)
4,0 1,0
16,0 2,5 2,5
18,0 2,0
20,0 1,6 Free on wheels 0 — 180°
22,0 1,3

Crane
Capacities 7,5 1)
11,9 1)
16,3 1)

Radius (m) (ton) (ton) (ton)


Charges 2)
13,0 5,0 2,8 1,5 0,8
3,0 10,0 10,2 10,2
3,5 8,8 9,1 9,3
5,95m x 4,0m — 360° Main Boom
4,0 8,0 8,3 8,4
7,5 11,9 16,3 20,7 25,0 4,5 7,3 7,5 7,6
Radius (m) (ton) (ton) (ton) (ton) (ton) 5,0 6,9 7,0
3,0 21,8 16,0 16,0 6,0 5,7 5,8
3,5 19,4 16,0 16,0 13,0 7,0 4,4 4,5
4,0 14,9 15,3 13,5 12,0 8,0 3,5 3,6
4,5 11,6 12,0 11,6 10,4 9,0 2,9 2,9
5,0 9,8 10,0 9,2 8,3 10,0 2,5
6,0 7,0 7,2 7,3 6,7 12,0 1,8
7,0 5,4 5,5 5,6 5,5 Capacities
8,0 4,3 4,4 4,5 4,5 Charges 2)
6,5 2,5 1,0
9,0 3,5 3,6 3,7 3,7
10,0 3,0 3,1 3,1
12,0 2,1 2,2 2,2 Free on wheels 360°
14,0 1,6 1,7 7,5 1)
11,9 1)
16,3 1)

16,0 1,2 1,3 Radius (m) (ton) (ton) (ton)


18,0 1,0 3,0
20,0 0,7 3,5 6,0 6,3 6,5
22,0 0,5 4,0 5,1 5,5 5,5
24,0 4,5 4,4 4,8 4,9
Capacities 5,0 4,1 4,2
Charges 2)
9,0 2,5 1,2 0,5 6,0 3,0 3,1
7,0 2,3 2,4
* only stationary 8,0 1,8 1,9
1)
type of tyres 14.00 9,0 1,5 1,5
2)
with horizontal boom 10,0 1,2
12,0 0,8
Capacities
Charges 2)
3,5 1,0

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE
30 Tonne Crane CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC30 (CITY CRANE)


LIFTING CAPACITIES FLY JIB DUTIES

5,95m x 5,90m — 360° 5,95m x 4,0m — 360°


20,7 20,7

Radius (m) 7,1m 13,0m Radius (m) 7,1m 13,0m


0° 30° 0° 30° 0° 30° 0° 30°
5,0 5,6 5,0 5,6

30 Tonne
6,0 5,6 6,0 5,6
7,0 5,3 2,2 7,0 5,3 2,2
8,0 5,0 2,2 8,0 4,6 2,2
9,0 4,7 3,7 2,2 9,0 3,8 3,7 2,2
10,0 4,4 3,6 2,1 10,0 3,2 3,5 2,1
11,0 4,2 3,5 2,1 11,0 2,7 3,0 2,1
12,0 4,0 3,4 2.0 12,0 2,3 2,6 2.0
13,0 3,8 3,3 1,9 1,7 13,0 2,0 2,2 1,9 1,7
14,0 3,3 3,2 1,9 1,6 14,0 1,7 1,9 1,8 1,6
15,0 2,9 3,1 1,8 1,6 15,0 1,5 1,7 1,6 1,6
16,0 2,6 2,8 1,7 1,5 16,0 1,3 1,4 1,4 1,5
17,0 2,3 2,5 1,6 1,5 17,0 1,1 1,2 1,2 1,5
18,0 2,1 2,2 1,6 1,4 18,0 1,0 1,1 1,1 1,3
19,0 1,8 2,0 1,5 1,4 19,0 0,8 0,9 0,9 1,2
20,0 1,6 1,7 1,4 1,4 20,0 0,7 0,8 0,8 1,0
21,0 1,4 1,5 1,4 1,3 21,0 0,6 0,7 0,7 0,9
22,0 1,3 1,3 1,3 22,0 0,5 0,6 0,8

Crane
23,0 1,1 1,3 1,3 23,0 0,5 0,7
24,0 1,0 1,1 1,3 24,0 0,6
25,0 0,9 1,0 1,2 25,0
26,0 0,9 1,1 26,0
27,0 0,8 0,9 27,0
28,0 0,7 28,0
29,0 0,6 29,0
30,0 0,6 30,0

5,95m x 5,90m — 360° 5,95m x 4,0m — 360°


25,0 25,0
Radius (m) 7,1m 13,0m Radius (m) 7,1m 13,0m
0° 30° 0° 30° 0° 30° 0° 30°
7,0 4,5 7,0 4,5
8,0 4,4 2,0 8,0 4,2 2,0
9,0 4,2 2,0 9,0 3,6 2,0
10,0 4,0 3,4 2,0 10,0 3,1 3,4 2,0
11,0 3,9 3,3 2,0 11,0 2,6 3,0 2,0
12,0 3,7 3,2 1,9 12,0 2,2 2,5 1,9
13,0 3,5 3,1 1,9 13,0 1,9 2,2 1,9
14,0 3,2 3,0 1,8 1,5 14,0 1,6 1,9 1,7 1,5
15,0 2,9 2,9 1,8 1,5 15,0 1,4 1,6 1,5 1,5
16,0 2,5 2,8 1,7 1,5 16,0 1,2 1,4 1,3 1,5
17,0 2,2 2,5 1,7 1,4 17,0 1,1 1,2 1,1 1,4
18,0 2,0 2,2 1,6 1,4 18,0 0,9 1,1 1,0 1,3
19,0 1,8 1,9 1,6 1,4 19,0 0,8 0,9 0,8 1,1
20,0 1,6 1,7 1,5 1,3 20,0 0,6 0,8 0,7 1,0
21,0 1,4 1,5 1,5 1,3 21,0 0,5 0,7 0,6 0,9
22,0 1,2 1,3 1,3 1,3 22,0 0,5 0,5 0,8
23,0 1,1 1,2 1,2 1,3 23,0 0,7
24,0 0,9 1,0 1,0 1,2 24,0 0,6
25,0 0,8 0,9 0,9 1,1 25,0
26,0 0,7 0,8 1,0 26,0
27,0 0,6 0,7 0,9 27,0
28,0 0,5 0,6 0,8 28,0
29,0 0,5 0,7 29,0
30,0 0,6 30,0

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC40-2L
DIMENSIONS

40 Tonne
Crane
() with independent rear axle steering

HOOKBLOCK

Vehicle weight 28,520kg Capacity 35te 25te 15te 5te


Weight 330kg 215kg 175kg 90kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC40-2L
MAIN BOOM DUTIES

Outrigger width 6,2 x 5,95 - 360°


Radius Length of Main Boom from 9,5m to 37,4
(m) 9,5
(1)
9,5 13,0 16,5 19,8 23,5 26,8 30,5 34,1 37,4
2,6 40,00
3,0 35,00 32,00 31,20 25,95 18,95

40 Tonne
3,5 30,15 27,45 27,45 23,70 18,35 18,40
4,0 27,75 24,90 24,90 22,00 18,60 17,55
4,5 25,00 22,60 22,60 20,45 17,95 16,25 14,45
5,0 22,30 20,60 20,60 19,05 16,75 15,15 13,85
6,0 17,80 17,00 17,00 17,00 14,70 13,30 12,20 10,00
7,0 14,45 14,45 14,50 14,50 12,75 11,80 10,90 9,65 7,45
8,0 11,50 11,50 11,50 10,20 9,75 8,80 7,45 5,55
9,0 9,50 9,50 9,50 8,70 8,55 8,00 7,05 5,35
10,0 8,00 8,00 8,00 7,50 7,40 7,30 6,70 5,00
11,0 6,70 6,70 6,70 6,50 6,40 6,15 4,65
12,0 6,00 6,00 6,00 5,70 5,70 5,60 4,40
13,0 5,20 5,20 5,20 5,20 5,05 5,00 4,15
14,0 4,60 4,60 4,60 4,60 4,50 4,50 3,95
15,0 4,00 4,00 4,00 4,00 4,00 3,70

Crane
16,0 3,60 3,60 3,60 3,55 3,60 3,45
17,0 3,20 3,20 3,20 3,15 3,20 3,20
18,0 2,80 2,80 2,80 2,80 2,80
19,0 2,60 2,60 2,50 2,60 2,60
20,0 2,50 2,50 2,25 2,35 2,40
21,0 2,30 2,30 2,00 2,25 2,15
22,0 2,00 1,80 2,00 1,95
23,0 1,80 1,60 1,80 1,75
24,0 1,70 1,45 1,70 1,60
25,0 1,35 1,50 1,45
26,0 1,25 1,40 1,30
27,0 1,15 1,30 1,15
28,0 1,05 1,20 1,05
29,0 1,10 0,90
30,0 1,00 0,80
31,0 0,90 0,70
32,0 0,60

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC40-2L
MAIN BOOM DUTIES

Outrigger width 6,2 x 4,80 - 360° Free on wheels


— 0° — 360°
Length of main boom From 9,5mm to 16,5m From 9,5m
Radius to13,0m
(m) 9,5 13,0 16,5 19,8 23,5 26,8 30,5 34,1 37,4 9,5 13,0 16,5 9,5 13,0
3,0 29,55 29,55 25,95 18,95 10,15 11,00 11,45 8,00 8,80

40 Tonne
3,5 26,30 26,30 23,70 18,35 18,40 9,05 9.75 10,20 6,75 7,50
4,0 23,60 23,60 22,00 18,60 17,55 8,10 8,75 9,15 5,80 6,45
4,5 21,35 21,30 19,65 17,95 16,25 14,45 7,30 7,90 8,25 5,00 5,65
5,0 19,45 18,05 18,25 15,55 14,85 13,85 6,60 7,20 7,50 4,35 4,95
6,0 15,40 14,90 14,20 13,55 11,65 11,30 10,00 5,50 6,00 6,30 3,35 3,85
7,0 11,55 11,95 11,50 11,10 9,55 9,25 9,00 7,45 4,60 5,10 5,35 2,60 3,05
8,0 9,55 9,55 9,30 8,75 7,75 7,55 7,40 5,55 4,35 4,60 2,45
9,0 7,80 8,05 7,95 7,70 6,90 6,45 6,35 5,35 3,50 3,75 1,95
10,0 6,50 6,75 6,85 6,70 6,40 5,60 5,50 5,00 2,90 3,15 1,55
11,0 5,75 5,85 5,90 5,75 4,85 4,80 4,65 2,60
12,0 4,95 5,05 5,20 5,10 4,25 4,25 4,20 2,15
13,0 4,30 4,45 4,55 4,60 3,75 3,85 3,70 1,85
14,0 3,75 3,90 4,00 4,05 3,35 3,60 3,30 1,50
15,0 3,45 3,55 3,60 2,95 3,25 2,95
16,0 3,05 3,15 3,20 2,70 2,95 2,65

Crane
17,0 2,70 2,80 2,90 2,45 2,65 2,35
18,0 2,50 2,60 2,30 2,40 2,15
19,0 2,25 2,35 2,10 2,15 1,90
20,0 2,05 2,10 1,95 1,90 1,70
21,0 1,85 1,90 1,80 1,70 1,50
22,0 1,70 1,70 1,50 1,35
Max. counterweight: 5,5T

23,0 1,55 1,55 1,35 1,20


24,0 1,40 1,45 1,20 1,05
25,0 1,30 1,10 0.90
26,0 1,20 0.95 0,80
27,0 1,05 0,85 0,65
28,0 0,95 0,75
29,0 0,65

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC40-2L
FLY JIB DUTIES

Lifting capacities outriggers 6,20m x 5,95m


34,10m Main Boom 37,50m Main Boom
Radius (m)
8,0m 8,0m
0° 20° 40° 0° 20° 40°

40 Tonne
9,0 3,20
10,0 3,00 2,80
11,0 2,90 1,90 2,70
12,0 2,70 1,80 2,70 1,80
13,0 2,60 1,75 1,40 2,60 1,75
14,0 2,45 1,70 1,35 2,50 1,70 1,35
15,0 2,35 1,65 1,35 2,35 1,65 1,35
16,0 2,25 1,60 1,30 2,25 1,60 1,30
17,0 2,15 1,55 1,30 2,15 1,60 1,30
18,0 2,10 1,55 1,25 2,05 1,55 1,25
19,0 2,00 1,50 1,25 1,95 1,50 1,25
20,0 1,95 1,45 1,25 1,85 1,50 1,25
21,0 1,85 1,45 1,25 1,85 1,50 1,25
22,0 1,80 1,40 1,20 1,75 1,40 1,20
23,0 1,75 1,40 1,20 1,65 1,40 1,20
24,0 1,70 1,35 1,20 1,60 1,40 1,20

Crane
25,0 1,60 1,35 1,20 1,50 1,35 1,20
26,0 1,45 1,30 1,20 1,45 1,30 1,20
27,0 1,30 1,30 1,20 1,30 1,30 1,20
28,0 1,15 1,25 1,20 1,20 1,25 1,20
29,0 1,05 1,15 1,20 1,05 1,20 1,15
30,0 0,95 1,05 1,10 0,95 1,05 1,15
31,0 0,85 0,95 0,95 0,85 0,95 1,00
32,0 0.75 0.85 0.85 0,75 0,85 0,90
33,0 0,65 0,75 0,75 0,70 0,75 0,80
34,0 0,60 0,65 0,65 0,60 0,70 0,70
35,0 0,50 0,55 0,55 0,55 0,60 0,60
36,0 0,50 0,55
37,0

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC40-1 (CITY CRANE)


DIMENSIONS

40 Tonne
Crane
() with independent rear axle steering

HOOKBLOCK

Vehicle weight 33,320kg Capacity 25,3te 10te 3,3te


Weight 220kg 100kg 80kg

LOAD REDUCTIONS

Boom Length 7,8m 10,7m 13,6m 19,5m 25,3m 28,4m 31,2m


(Citycrane) Reductions 420kg 310kg 250kg 180kg 130kg 120kg 110kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC40-1 (CITY CRANE)


LIFTING CAPACITIES - OUTRIGGERS FULLY EXTENDED

Outriggers fully extended Free on wheels


Radius Over rear 360° Slew over Rear
(m) 7,8 7,8 10,7 13,6 19,5 25,3 28,4 31,2 7,8 10,7 13,6
3 40,0 34,3 25,0 21,0 14,5 14,0 15,1
3,5 32,4 25,0 21,0 12,9 12,4 13,4

40 Tonne
4 30,5 25,0 21,0 16,0 11,5 11,1 12,1
4,5 28,3 25,0 20,7 16,0 10,4 10,0 11,0
5 24,0 19,7 16,0 9,0 10,0
6 20,3 17,9 16,0 14,0 7,5 8,4
7 17,0 16,0 15,3 13,2 11,1 6,1 7,2
8 15,4 14,0 12,2 10,8 9,0 5,9
9 12,6 12,3 11,2 10,1 8,8 4,8
10 10,5 10,3 10,3 9,4 8,3 4,1
12 8,1 7,6 7,6 7,3
14 5,9 6,0 5,9
16 5,0 4,9 4,7
18 4,3 4,0 3,8
20 3,5 3,4 3,1
22 3,0 2,8 2,6
24 2,3 2,1

Crane
26 1,7
28 1,4
30

LIFTING CAPACITIES - OUTRIGGERS PARTIALLY EXTENDED

Outriggers partially extended (4,40m) - 360


Radius Main Boom
(m) 7,8 10,7 13,6 19,5 25,3 28,4 31,2
3 34,3 25,0 21,0
3,5 31,2 25,0 21,0
4 28,3 25,0 21,0 16,0
4,5 23,8 23,0 20,7 16,0
5 18,4 18,0 16,0
6 13,0 14,4 14,2 13,6
7 9,8 11,1 11,4 10,9 10,8
8 8,9 9,2 8,7 8,8 8,8
9 7,3 7,6 7,7 7,4 7,2
10 6,2 6,4 6,5 6,3 6,1
12 4,8 4,9 4,7 4,5
14 3,7 3,8 3,6 3,4
16 3,0 3,0 2,8 2,7
18 2,5 2,3 2,1
20 2,1 1,8 1,7
22 1,7 1,5 1,3
24 1,2 1,0
26 0,8
28 0,6
HB 20,0 7,0 5,2 2,5 1,5 0,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC40-1 (CITY CRANE)


LIFTING CAPACITIES - OUTRIGGERS IN MIN. POSITION

Free on wheels - 360°


Radius Outriggers at 2.34m - 360° Slew Slew (Stationery)
(m) 7,8 10,7 13,6 19,5 7,8 10,7 13,6
4 11,8 11,2 12,6 12,9

40 Tonne
4,5 9,8 9,2 10,5 10,8 5,9 5,4 6,6
5 7,7 8,9 9,2 4,7 5,8
6 5,7 6,7 7,0 3,6 4,7
7 4,3 5,3 5,5 2,8 3,8
8 4,3 4,5 3,1
9 3,6 3,8 2,6
10 3,0 3,2 2,2
12 2,3
14 1,7

LIFTING CAPACITIES FLY JIB

Crane
360° Slew - 25.3m Main Boom +
Outriggers Fully Extended Outriggers Partially
Extended (4.40m)
Radius 7.1m ext 13.0m ext 7.1m ext 13.0m ext
(m) 0° 30° 0° 30° 0° 30° 0° 30°
8 6,5 6,5
9 6,2 6,2
10 5,9 4,2 3,6 5,9 4,2 3,6
12 5,4 4,0 3,3 4,7 4,0 3,3
14 4,9 3,8 3,0 3,6 3,8 3,0
16 4,5 3,7 2,8 2,2 2,8 3,1 2,8 2,2
18 4,0 3,5 2,6 2,1 2,3 2,5 2,4 2,1
20 3,3 3,4 2,4 2,0 1,8 2,0 1,9 2,0
22 2,8 2,9 2,3 1,9 1,5 1,6 1,6 1,9
24 2,3 2,4 2,1 1,9 1,2 1,3 1,3 1,6
26 1,9 2,0 1,8 0,9 1,0 1,3
28 1,6 1,7 1,8 0,7 0,8 1,0
30 1,5 1,6 0,6 0,8
32 1,2
34 1,0

360° Slew - 31.2m Main Boom +


Outriggers fully extended Outriggers Partially Extended
Radius 7.1m ext 13.0m ext 7.1m ext 13.0m ext
(m) 0° 30° 0° 30° 0° 30° 0° 30°
10 5,0 5,0
12 4,8 3,9 3,0 4,6 3,9 3,0
14 4,6 3,7 2,9 3,5 3,7 2,9
16 4,4 3,5 2,8 2,8 3,1 2,8
18 4,0 3,3 2,7 2,1 2,2 2,5 2,3 2,1
20 3,3 3,1 2,5 2,0 1,7 2,0 1,8 2,0
22 2,7 2,9 2,4 1,9 1,4 1,6 1,5 1,8
24 2,2 2,4 2,2 1,9 1,1 1,3 1,2 1,5
26 1,8 2,0 1,9 1,8 0,8 1,0 0,9 1,2
28 1,5 1,6 1,6 1,8 0,6 0,7 0,7 1,0
30 1,2 1,3 1,3 1,6 0,7
32 0,9 1,1 1,3
34 0,7 0,9 1,0
36 0,7

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 3055


DIMENSIONS

60 Tonne
Crane
Ra = Radius all wheels steered

HOOKBLOCK
Vehicle weight 43,280kg Capacity 63te 40te 16te 5te
Weight 600kg 400kg 250kg 100kg

LOAD REDUCTIONS

Boom Length 9,6 13,0m 16,4m 19,8m 23,2m 26,8m 29,6m 34,0m 36,6m 39,7m 43,0m
Reductions 500kg 385kg 300kg 252kg 200kg 187kg 167kg 147kg 150kg 126kg 100kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 3055


MAIN BOOM DUTIES

Radius Telescopic Boom — 11,6 t counterweight


(m) 9,6 13,0 16,4 19,8 23,2 26,8 29,6 34,0 36,6 39,7 43,0
2,5 55,0**
3,0 50,0*/45,0 42,5 39,5 38,0 32,5 23,5
4,0 37,0 36,0 34,5 33,0 29,5 21,5 19,0

60 Tonne
5,0 31,5 31,0 30,0 28,5 26,0 19,4 17,5 14,4 11,3
6,0 26,5 26,5 26,0 25,5 23,5 17,9 16,1 14,2 11,3 9,0
7,0 20,5 22,5 22,0 22,0 21,0 16,3 14,7 13,2 11,3 9,0 7,6
8,0 19,2 19,3 18,1 17,8 15,2 13,3 12,2 10,9 9,0 7,6
9,0 15,8 15,9 15,7 15,2 14,1 11,9 11,3 10,3 9,0 7,6
10,0 13,5 13,8 13,8 13,2 13,0 10,8 10,3 9,6 8,6 7,6
11,0 11,8 11,8 11,5 11,6 9,7 9,3 8,9 8,1 7,5
12,0 10,2 10,2 10,4 10,3 9,1 8,6 8,4 7,7 7,2
* 0° over rear

13,0 9,0 8,9 9,3 9,0 8,4 8,0 7,8 7,3 6,8
14,0 8,1 8,3 8,0 7,7 7,4 7,2 6,9 6,5
15,0 7,5 7,4 7,1 6,8 6,8 6,6 6,5 6,2
16,0 6,8 6,6 6,4 6,1 6,1 6,1 6,1 5,8
** 0° over rear with additional equipment

18,0 5,4 5,2 4,9 4,9 5,0 5,1 5,2

Crane
20,0 4,5 4,2 4,0 4,0 4,1 4,2 4,4
22,0 3,5 3,3 3,2 3,5 3,8 3,6
24,0 2,3 3,1 2,6 3,2 3,3 3,0
26,0 2,2 2,2 2,9 2,8 2,5
28,0 1,7 2,4 2,3 2,1
30,0 1,4 2,1 2,0 1,8
32,0 1,8 1,7 1,5
34,0 1,4 1,2
36,0 0,8 1,0
38,0 0,7

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 3055


FLY JIB DUTIES

Swingway (hydraulic luffing) — 8,7m


39,7 43,0
Radius 8,7 8,7
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
9,0 4,8

60 Tonne
10,0 4,8 4,1
11,0 4,8 4,1
12,0 4,8 4,2 2,5 4,1
13,0 4,7 4,1 2,5 4,1 3,8 2,5
14,0 4,7 4,0 3,3 2,4 1,9 4,1 3,8 2,4
15,0 4,6 3,9 3,3 2,3 1,9 4,1 3,8 3,2 2,4 1,9
16,0 4,5 3,8 3,2 2,2 1,8 3,9 3,7 3,2 2,3 1,9
18,0 4,1 3,7 3,2 2,1 1,8 3,6 3,4 3,1 2,2 1,8
20,0 3,8 3,5 3,1 2,0 1,7 3,3 3,2 3,1 2,1 1,8
22,0 3,4 3.3 3,0 1,9 1,7 3,1 3,0 2,9 2,0 1,7
24,0 2,9 2,9 3,0 1,8 1,7 2,9 2,8 2,7 1,9 1,7
26,0 2,6 2,5 2,6 1,8 1,6 2,5 2,5 2,6 1,8 1,7
28,0 2,3 2,3 2,3 1,7 1,6 2,1 2,1 2,3 1,8 1,6
30,0 2,0 2,0 2,1 1,6 1,6 1,7 1,7 1,9 1,7 1,6
32,0 1,6 1,6 1,8 1,6 1,6 1,4 1,4 1,5 1,4 1,5
34,0 1,4 1,4 1,5 1,4 1,5 1,1 1,1 1,3 1,1 1,3

Crane
36,0 1,1 1,1 1,2 1,1 1,2 0,9 0,9 1,0 0,9 1,0
38,0 0,9 0,9 1,0 0,9 1,0 0,7 0,7 0,8 0,7 0,8
40,0 0,7 0,7 0,8 0,7 0,8
42,0 0,6 0,6

Swingway (hydraulic luffing) — 15m


39,7 43,0
Radius 15 15
(m) 0º 20º 40º *5º - 20° *20º - 40° 0º 20º 40º *5º - 20° *20º - 40°
9,0 2,7
10,0 2,7 2,4
11,0 2,7 2,4
12,0 2,7 2,4
13,0 2,7 2,4
14,0 2,7 2,4
15,0 2,6 2,2 1,3 2,4
16,0 2,6 2,1 1,2 2,4 2,1 1,3
18,0 2,6 2,1 1,2 2,4 2,1 1,2
20,0 2,5 2,0 1,6 1,1 0,9 2,3 2,0 1,6 1,1 0,9
22,0 2,3 1,9 1,6 1,0 0,8 2,3 1,9 1,6 1,1 0,8
24,0 2,2 1,8 1,6 1,0 0,8 2,2 1,8 1,6 1,0 0,8
26,0 2,1 1,8 1,5 0,9 0,8 2,1 1,8 1,5 0,9 0,8
28,0 2,0 1,7 1,5 0,9 0,8 2,0 1,7 1,5 0,9 0,8
30,0 1,9 1,7 1,5 0,8 0,7 1,9 1,7 1,5 0,9 0,8
32,0 1,7 1,6 1,5 0,8 0,7 1,6 1,6 1,5 0,8 0,7
* Luffing under load

34,0 1,6 1,5 1,5 0,8 0,7 1,3 1,3 1,5 0,8 0,7
36,0 1,3 1,3 1,4 0,7 0,7 1,1 1.1 1,3 0,8 0,7
38,0 1,1 1,1 1,3 0,7 0,7 0,9 0,9 1,1 0,7 0,7
40,0 0,9 0,9 1,1 0,7 0,7 0,7 0,7 0,9 0,7 0,7
42,0 0,7 0,7 0,9 0,7 0,7 0,7 0,7
44,0 0,6 0,6 0,7 0,6 0,6

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC60-3L
DIMENSIONS

60 Tonne
3.965m

Crane
() with independent rear axle steering

HOOKBLOCK

Vehicle weight 47,600kg Capacity 35te 15te 5te


Weight 385kg 170kg 90kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC60-3L
MAIN BOOM DUTIES

Outrigger width 7,20m x 6,30 — 360°


Radius Length of Main Boom 11,6 t counterweight
(m) 9,9 13,3 16,7 19,5 22,3 26,8 31,3 34,2 37,2 40,1 44,0
3 51,5 39,1 37,9 40,2
3,5 47,6 40,5 39,0 37,6

60 Tonne
4 42,7 41,2 40,1 34,8 30,1 23,5
4,5 38,5 38,5 37,3 32,4 28,5 23,5
5 36,0 36,0 34,9 30,2 26,8 22,9
6 31,7 31,7 31,0 26,8 23,6 20,5 16,0
7 26,9 25,6 25,7 23,8 21,1 18,4 16,0 14,0 12,0
8 22,8 21,3 20,0 19,0 16,5 14,5 13,3 11,8
9 19,5 19,7 16,8 16,2 15,1 13,3 12,3 11,3 8,8
10 16,5 16,7 14,3 14,7 13,7 12,2 11,4 10,5 8,8 6,8
12 12,4 12,0 12,4 10,9 10,4 9,8 9,0 8,2 5,9
14 9,4 9,2 9,6 9,3 8,5 8,2 7,9 7,3 5,2
16 7,3 7,6 7,4 7,5 6,7 6,9 6,4 4,7
18 6,2 6,0 6,2 5,6 5,7 5,7 4,2
20 5,1 4,9 5,1 5,0 5,1 4,8 3,8
22 4,0 4,2 4,4 4,2 4,0 3,3

Crane
24 3,3 3,5 3,7 3,5 3,3 3,0
26 3,0 3,2 3,0 2,7 2,7
28 2,5 2,7 2,5 2,2 2,3
30 2,3 2,1 1,8 1,9
32 1,9 1,7 1,5 1,5
34 1,4 1,2 1,2
36 0,9 1,0
38 0,7
40 0,5

• While lifting on main boom with extension rigged, deduct from main boom load chart the
following; 750kg with extension 7.75m. 1650kg with extension 7.75m + 7m.
• With extension in the transported position, there is no reduction in load capacity.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC60-3L
MAIN BOOM DUTIES

Outrigger width 7,20m x4,80 — 360°


Radius Length of Main Boom 11,6 t counterweight
(m) 9,91) 9,9 13,3 16,7 19,5 22,3 26,8 31,3 34,2 37,2 40,1 44,0
2,5 60,0
over rear Lengths may vary depending on various telescoping sequences

3 51,5 48,9 39,1 37,9 40,2

60 Tonne
3,5 47,6 43,9 40,5 39,0 37,6
4 44,1 39,7 39,7 39,7 34,8 30,1 23,5
4,5 41,0 36,1 36,1 33,8 31,0 28,5 23,5
5 38,2 33,1 31,4 29,0 26,7 25,3 22,9
6 33,0 26,9 23,8 22,3 20,6 19,7 19,0 16,0
7 26,9 20,2 18,9 18,6 17,0 15,8 15,5 15,1 12,3 10,8
8 17,0 16,7 15,7 15,4 14,3 13,3 12,3 10,8
9 13,9 14,0 13,4 13,2 12,3 12,1 10,7 10,2 8,8
10 11,7 11,7 11,6 11,5 10,7 10,6 9,3 9,2 8,8 6,8
12 8,7 8,5 8,8 8,3 8,3 7,8 7,8 7,3 5,9
14 6,6 6,5 6,8 6,6 6,6 6,6 6,3 5,9 5,2
16 5,0 5,3 5,1 5,4 5,5 5,1 4,7 4,6
18 4,3 4,1 4,3 4,5 4,2 3,9 3,8
20 3,5 3,3 3,5 3,6 3,5 3,1 3,1

Crane
22 2,6 2,8 3,0 2,8 2,5 2,5
24 2,1 2,3 2,4 2,3 2,0 2,0
26 1,8 2,0 1,8 1,6 1,6
28 1,4 1,6 1,4 1,2 1,2
30
1)

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC60-3L
FLY JIB DUTIES

Lifting capacities outriggers 7,20m x 6,30m


37,2m Main Boom 44,0m Main Boom 44,0m Main Boom
Radius (m)
8,0m 8,0m 15,0m
0° 20° 40° 0° 20° 40° 0° 20° 40°

60 Tonne
12 5,6 4,3 3,6
14 5,6 4,3 3,5 3,4 2,0
16 5,0 4,0 3,2 3,4 3,1 2,9 2,0
18 4,4 3,8 3,1 3,1 2,8 2,7 1,9 1,3
20 3,9 3,6 3,1 2,8 2,6 2,4 1,8 1,3
22 3,5 3,5 3,0 2,5 2,3 2,3 1,7 1,2 1,0
24 3,1 3,1 3,0 2,3 2,2 2,1 1,6 1,2 1,0
26 2,7 2,8 2,8 2,1 2,0 1,9 1,5 1,1 1,0
28 2,2 2,4 2,5 1,9 1,8 1,8 1,4 1,1 0,9
30 1,8 1,9 2,1 1,7 1,7 1,7 1,4 1,1 0,9
32 1,4 1,6 1,6 1,5 1,6 1,6 1,3 1,0 0,9
34 1,1 1,2 1,3 1,2 1,4 1,5 1,2 1,0 0,9
36 0,8 0,9 1,0 0,9 1,1 1,2 1,1 1,0 0,9
38 0,6 0,7 0,7 0,7 0,8 0,9 0,9 1,0 0,9

Crane
40 0,6 0,6 0,7 0,9 0,9
42 0,7 0,8
44 0,6

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC70 (CITY CRANE)


DIMENSIONS

70 Tonne
Crane
() with independent rear axle steering

HOOKBLOCK

Vehicle weight 58,000kg Capacity 5,5te 16,5te 38,5te 60,5te


Weight 170kg 350kg 550kg 650kg

LOAD REDUCTIONS

Boom Length 8m 13,1m 18,1m 23,4m 28,0m 32,3m 37,4m 40,1m 45,3m 48,0m 52,0m
Reductions 0,7 0,5 0,3 0,2 0,2 0,2 0,2 0,1 0,1 0,1 0,1

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC70 (CITY CRANE)


MAIN BOOM DUTIES

Radius Length of Main Boom — 12,3 t counterweight, 360°


(m) 8,0* 8,0 13,1 18,1 23,4 28,0 32,3 37,4 40,1 45,3 48,0 52,0
3 70,0 55,1 53,3 47,8 37,6
3,5 63,3 50,2 50,4 46,1 37,6

70 Tonne
4 55,0 46,0 46,4 44,3 37,6
4,5 48,5 42,3 42,8 41,7 37,6
5 39,5 39,3 36,7
6 34,4 34,3 33,6 24,5 20,1
7 29,8 29,9 29,9 22,4 18,5
8 25,9 25,9 25,6 20,7 17,1 14,0
9 22,6 22,5 22,6 19,0 15,9 13,0 12,0
10 19,9 20,1 20,2 17,6 14,8 12,1 11,3 8,9
12 15,7 15,4 14,3 13,0 10,7 10,0 8,5 8,0
14 12,4 12,0 11,8 10,9 9,5 8,8 7,7 7,3 6,2
16 10,1 9,8 9,0 8,6 8,0 7,0 6,7 5,8
18 8,6 8,1 7,9 7,0 7,1 6,3 6,1 5,4
20 7,0 6,6 6,3 6,0 5,8 5,6 5,0
22 6,2 5,7 5,8 5,3 5,1 5,1 4,7
24 5,4 5,2 4,9 4,9 4,5 4,4 4,3

Crane
26 4,5 4,3 4,3 4,0 3,7 3,7
28 4,2 3,9 3,8 3,3 3,1 3,1
30 3,4 3,3 2,8 2,6 2,6
32 3,0 2,8 2,4 2,1 2,2
34 2,7 2,4 2,2 1,8 1,8
36 2,2 1,9 1,4 1,4
38 1,6 1,1 1,1
* over front

40 1,4 0,9 0,9


42 1,1 0,6 0,6
44

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC70 (CITY CRANE)


MAIN BOOM DUTIES

Radius Partial Rigged 7,45m x 4,8m — 12,3 t counterweight, 360°


(m) 8,0 13,1 18,1 23,4 28,0 32,3 37,4 40,1 45,3 48,0 52,0
3 50,5 50,8 47,8 37,6
3,5 45,5 46,0 45,8 37,6

70 Tonne
4 41,3 42,1 42,0 37,6
4,5 37,8 38,6 38,7 37,6
5 35,6 35,6 34,9
6 29,9 30,0 28,2 23,6 20,1
7 23,2 23,6 23,3 19,7 18,5
8 18,9 19,0 18,7 16,7 15,9 14,0
9 15,6 15,7 15,4 15,1 13,7 12,9 12,0
10 13,3 13,4 13,1 12,2 11,3 11,1 8,9
12 10,4 10,3 10,0 9,6 9,1 8,8 8,5 8,0
14 8,2 8,3 8,1 7,9 7,7 7,5 7,4 7,1 6,2
16 6,8 6,6 6,7 6,5 6,3 5,9 5,7 5,6
18 5,7 5,7 5,5 5,4 5,2 4,8 4,6 4,6
20 4,8 4,7 4,5 4,4 4,2 3,8 3,8
22 4,2 4,0 3,8 3,8 3,5 3,1 3,1
24 3,4 3,2 3,2 2,9 2,5 2,5

Crane
26 3,0 2,7 2,8 2,4 2,1 2,1
28 2,6 2,3 2,4 2,1 1,6 1,7
30 2,0 2,0 1,7 1,2 1,3
32 1,7 1,7 1,4 0,9 0,9
34 1,5 1,5 1,1 0,6
36 1,2 0,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC70 (CITY CRANE)


MAIN BOOM DUTIES

Main Boom Extension — 12,3 t counterweight, 360°


40,1m
Radius 7,6m 14,0m
(m) 0° 20° 35° 50° 0° 20° 35° 50°
12 8,1 4,5
14 7,2 6,9 4,4

70 Tonne
16 6,6 6,5 5,8 4,9 4,3
18 5,9 5,9 5,5 4,9 4,1 3,4
20 5,4 5,3 5,2 4,8 3,9 3,3 3,0
22 4,9 4,9 4,9 4,7 3,8 3,2 2,9 2,4
24 4,1 4,4 4,5 4,4 3,6 3,1 2,8 2,4
26 3,6 3,8 3,9 4,0 3,5 3,0 2,7 2,4
28 3,3 3,3 3,3 3,4 3,1 3,0 2,7 2,3
30 3,0 3,1 3,1 3,1 2,7 2,9 2,7 2,3
32 2,7 2,8 2,8 2,8 2,5 2,6 2,6 2,3
34 2,3 2,5 2,6 2,4 2,3 2,4 2,4 2,3
36 2,0 2,1 2,2 2,0 2,2 2,2 2,2
38 1,7 1,8 1,8 1,9 1,9 2,0 2,0
40 1,4 1,5 1,4 1,6 1,7 1,8 1,8
42 1,2 1,2 1,4 1,6 1,6
44 1,0 0,8 1,2 1,3 1,4
46 1,0 1,1 1,0
48 0,8 0,9

Crane
50 0,6
52

Main Boom Extension — 12,3 t counterweight, 360°


45,3m
Radius 7,6m 14,0m
(m) 0° 20° 35° 50° 0° 20° 35° 50°
14 6,2 3,9
16 5,7 5,3 3,8
18 5,3 5,0 4,9 4,7 3,8
20 4,8 4,7 4,6 4,6 3,6 3,2
22 4,4 4,4 4,3 4,3 3,5 3,1 2,8
24 4,1 4,1 4,1 4,1 3,4 3,0 2,7 2,3
26 3,5 3,8 3,8 3,8 3,2 3,0 2,7 2,3
28 3,2 3,2 3,4 3,5 3,0 2,9 2,6 2,3
30 2,7 3,0 3,0 3,0 2,6 2,7 2,6 2,3
32 2,3 2,5 2,6 2,7 2,2 2,6 2,5 2,3
34 1,9 2,1 2,2 2,2 2,1 2,2 2,4 2,3
36 1,6 1,7 1,8 1,8 1,7 1,8 2,0 2,2
38 1,4 1,5 1,5 1,4 1,7 1,8 1,8
40 1,2 1,3 1,3 1,2 1,4 1,6 1,7
42 0,9 1,0 1,1 1,1 1,2 1,3 1,4
44 0,7 0,8 0,8 0,9 1,1 1,1
46 0,7 0,9 0,9
48 0,7 0,7
50
52
54

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC70 (CITY CRANE)


MAIN BOOM DUTIES

Main Boom Extension — 12,3 t counterweight, 360°


48,0m
Radius 7,6m 14,0m
(m) 0° 20° 35° 50° 0° 20° 35° 50°
14 5,1
16 4,8 4,3 3,3

70 Tonne
18 4,6 4,1 3,9 3,8 3,1
20 4,4 3,9 3,7 3,6 2,9 2,5
22 4,1 3,7 3,6 3,5 2,8 2,4 2,3
24 3,9 3,6 3,4 3,5 2,7 2,3 2,2 2,1
26 3,6 3,4 3,3 3,3 2,5 2,2 2,1 2,0
28 3,0 3,2 3,1 3,2 2,4 2,1 2,0 2,0
30 2,5 2,8 2,9 3,0 2,3 2,1 2,0 2,0
32 2,0 2,3 2,4 2,5 2,2 2,0 1,9 1,9
34 1,7 1,9 2,0 2,1 1,9 1,9 1,9 1,9
36 1,3 1,5 1,6 1,7 1,5 1,9 1,8 1,9
38 1,0 1,2 1,3 1,3 1,2 1,5 1,7 1,8
40 0,7 0,9 1,0 0,9 1,2 1,4 1,5
42 0,6 0,7 0,7 1,0 1,1 1,2
44 0,7 0,9 0,9
46 0,6

Main Boom Extension — 12,3 t counterweight, 360°

Crane
51,5m
Radius 7,6m 14,0m
(m) 0° 20° 35° 50° 0° 20° 35° 50°
16 4,3
18 4,0 3,9 2,9
20 3,8 3,7 3,6 3,6 2,8
22 3,6 3,5 3,5 3,5 2,7 2,4
24 3,4 3,3 3,3 3,3 2,6 2,3 2,1
26 3,2 3,1 3,1 3,2 2,4 2,2 2,1 2,0
28 2,9 2,9 2,9 3,0 2,3 2,1 2,0 2,0
30 2,4 2,7 2,8 2,8 2,2 2,0 1,9 1,9
32 2,0 2,2 2,4 2,5 2,1 1,9 1,9 1,9
34 1,6 1,8 2,0 2,0 1,8 1,9 1,8 1,9
36 1,2 1,5 1,6 1,6 1,4 1,8 1,8 1,8
38 0,9 1,1 1,2 1,3 1,1 1,5 1,7 1,8
40 0,7 0,8 0,9 1,0 0,9 1,2 1,4 1,5
42 0,7 0,6 0,9 1,1 1,2
44 0,7 0,8 0,9
46 0,6
48

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC70 (CITY CRANE)


MAIN BOOM DUTIES

Main Boom Extension — 12,3 t counterweight, 360°


19,9m
Radius 40,1m 45,3m
(m) 0° 20° 35° 50° 0° 20° 35° 50°
14 2,7
16 2,6 2,4

70 Tonne
18 2,5 2,3
20 2,4 2,0 2,2
22 2,3 2,0 2,2
24 2,2 1,9 1,8 2,1 1,8
26 2,1 1,9 1,7 1,4 2,0 1,8 1,7
28 2,1 1,8 1,7 1,4 2,0 1,7 1,6 1,4
30 2,0 1,8 1,6 1,4 1,9 1,7 1,6 1,4
32 1,9 1,7 1,6 1,4 1,8 1,7 1,6 1,3
34 1,8 1,7 1,6 1,4 1,8 1,6 1,5 1,3
36 1,7 1,6 1,6 1,4 1,5 1,6 1,5 1,3
38 1,6 1,6 1,5 1,4 1,3 1,6 1,5 1,3
40 1,4 1,5 1,5 1,4 1,2 1,4 1,5 1,3
42 1,2 1,4 1,4 1,4 1,0 1,1 1,4 1,3
44 1,1 1,2 1,3 1,4 0,9 1,1 1,1 1,2
46 1,0 1,0 1,1 1,2 0,7 0,9 1,0 1,1
48 0,8 1,0 1,1 0,7 0,8 0,9
50 0,6 0,8 0,9 0,6 0,7

Crane
52 0,6
54
56

Main Boom Extension — 12,3 t counterweight, 360°


19,9m
Radius 48,0m 51,5m
(m) 0° 20° 35° 50° 0° 20° 35° 50°
18 2,1 1,8
20 2,0 1,8
22 1,9 1,8
24 1,8 1,6 1,7
26 1,7 1,5 1,7 1,5
28 1,7 1,5 1,4 1,6 1,4
30 1,6 1,4 1,3 1,3 1,5 1,4 1,3
32 1,5 1,3 1,3 1,2 1,5 1,3 1,2 1,2
34 1,5 1,3 1,2 1,2 1,4 1,3 1,2 1,2
36 1,4 1,2 1,2 1,2 1,4 1,2 1,2 1,2
38 1,3 1,2 1,2 1,2 1,1 1,2 1,1 1,2
40 1,0 1,1 1,1 1,2 0,9 1,1 1,1 1,1
42 0,8 1,1 1,1 1,1 0,6 1,1 1,1 1,1
44 0,9 1,1 1,1 0,8 1,0 1,1
46 0,7 0,9 1,0 0,6 0,8 1,0
48 0,6 0,7 0,7
50

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC80-2
DIMENSIONS

80 Tonne
Crane
() with independent rear axle steering

HOOKBLOCK
Vehicle weight 60,860kg Capacity 77te 60,5te 38,5te 16,5te 5,5te
Weight 750kg 650kg 550kg 350kg 170kg

LOAD REDUCTIONS

Boom Length 10,9m 16,1m 21,4m 25,0m 31,3m 37,1m 42,3m 46,1m 50,0m
Reductions 550kg 380kg 280kg 250kg 200kg 170kg 150kg 130kg 120kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC80-2
MAIN BOOM DUTIES

Radius Length of main boom Free on Wheels


(m) 10,9 16,1 21,4 25,0 31,3 37,1 42,3 46,1 50,0 10,9 16,1
3 80,0
3 70,0

80 Tonne
3,5 64,4 55,0
4 59,3 55,0 45,0 12,3 12,0
4,5 54,9 52,9 43,0 32,0 11,0 10,7
5 51,0 49,6 41,0 32,0 20,0 9,9 9,6
6 42,0 41,7 36,5 31,0 20,0 16,0 8,1 7,8
7 35,0 34,8 32,0 29,0 20,0 15,5 13,0 6,6 6,4
8 28,3 29,6 28,0 26,0 20,0 15,0 13,0 8,8 5,5 5,2
9 25,6 24,8 23,5 19,5 14,5 12,9 8,8 6,5 4,2
10 22,1 21,0 21,0 18,5 14,0 12,7 8,8 6,5 3,4
12 16,1 15,8 16,8 16,1 12,7 11,8 8,8 6,5 2,1
14 13,8 13,3 12,8 11,3 10,9 8,5 6,5
16 11,2 10,7 10,2 10,0 10,0 8,0 6,5
18 9,2 8,7 8,2 8,5 8,8 7,5 6,2

Crane
20 7,2 7,0 7,4 7,3 7,0 5,9
22 6,4 6,3 6,4 6,3 5,5
24 5,8 5,8 5,4 5,3 5,1
26 5,2 5,2 4,5 4,7 4,4
28 4,5 4,0 4,0 3,7
30 3,9 3,7 3,4 3,1
32 3,4 3,3 2,9 2,6
34 2,8 2,4 2,1
36 2,4 2,0 1,7
38 2,1 1,7 1,4
40 1,4 1,1
42 1,1 0,7
44
46

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC80-2
FLY JIB DUTIES

46,1metre Main Boom


Radius
(m) 9,2m 17,6m
0° 20° 40° 0° 20° 40°
10 3,9

80 Tonne
12 3,9 1,7
14 3,9 3,4 1,7
16 3,9 3,4 3,0 1,7
18 3,9 3,3 3,0 1,7 1,4
20 3,7 3,2 2,9 1,6 1,4
22 3,5 3,1 2,8 1,5 1,4
24 3,3 2,9 2,7 1,5 1,4 1,2
26 3,1 2,8 2,6 1,4 1,4 1,1
28 3,0 2,6 2,5 1,4 1,4 1,1
30 2,8 2,5 2,4 1,3 1,3 1,1
32 2,7 2,4 2,3 1,3 1,2 1,1
34 2,4 2,3 2,2 1,2 1,1 1,1
36 2,0 2,2 2,1 1,2 1,1 1,1
38 1,6 1,8 1,9 1,1 1,1 1,0
40 1,3 1,5 1,6 1,1 1,1 1,0
42 1,0 1,2 1,1 1,1 1,0

Crane
44 0,8 0,9 1,0 1,1 1,0
46 0,6 0,8 1,1 1,0
48 0,6 0,8 1,0
50 0,6

50metre Main Boom


Radius
(m) 9,2m 17,6m
0° 20° 40° 0° 20° 40°
12 3,0
14 3,0 3,0 1,2
16 3,0 3,0 2,7 1,2
18 3,0 2,9 2,7 1,2
20 2,9 2,8 2,6 1,2 1,1
22 2,8 2,7 2,5 1,1 1,1
24 2,6 2,5 2,3 1,1 1,1 1,0
26 2,5 2,4 2,2 1,0 1,1 1,0
28 2,3 2,2 2,1 1,0 1,0 1,0
30 2,2 2,1 2,0 1,0 1,0 1,0
32 2,1 2,0 1,9 1,0 1,0 1,0
34 2,0 1,9 1,9 0,9 1,0 1,0
36 1,9 1,8 1,8 0,9 0,9 0,9
38 1,5 1,8 1,8 0,9 0,9 0,9
40 1,2 1,4 1,6 0,9 0,9 0,9
42 0,9 1,1 0,8 0,9 0,9
44 0,7 0,9 0,7 0,8 0,9
46 0,6 0,7 0,8 0,8
48 0,8 0,8
50 0,6

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


DIMENSIONS

130 Tonne
Crane
Ra = Radius all wheels steered

Overall Vehicle Width 3m

HOOKBLOCK

Vehicle weight 65,000kg Capacity 8,0te 20,0te 50,0te 75,0te 100te


Weight 200kg 325kg 675kg 850kg 1150kg

LOAD REDUCTIONS

Boom Length 12,9m 22,3m 27,0m 31,6m 36,3m 41,2m 45,8m 50,6m 55,3m 60,0m
Reductions 800kg 500kg 400kg 300kg 300kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


MAIN BOOM DUTIES

Radius Length of main boom — 40,1 t counterweight

130 Tonne
(m) 12,9* 12,9 17,6 22,3 27,0 31,6 36,3 41,1 45,8 50,6 55,3 60,0
2,5 130**/110,0
3 94,5 93,5 86,0 81,0 65,0
4 81,0 79,0 76,5 71,0 65,0 50,0
5 70,5 68,0 67,5 63,5 60,5 49,5 38,0
6 62,0 59,5 60,0 57,5 54,5 47,0 37,0 28,0 20,5
7 55,0 52,5 53,0 52,0 50,0 44,0 35,0 28,0 20,5
8 48,0 46,5 47,0 47,0 46,0 41,5 33,0 28,0 20,5 16,0 11,6
9 41,0 41,0 42,5 42,5 42,0 39,0 31,5 26,5 20,5 16,0 11,6 10,0
10 31,5 31,5 38,0 38,0 37,5 37,0 29,5 25,0 20,5 16,0 11,6 10,0
11 35,0 34,5 34,0 34,5 28,0 23,5 20,5 16,0 11,6 10,0
12 32,0 31,5 31,5 32,0 26,5 22,5 19,5 16,0 11,6 10,0
13 29,0 29,0 28,5 29,5 25,0 21,0 18,6 16,0 11,6 10,0
14 25,0 26,5 26,0 27,0 23,5 19,7 17,7 15,8 11,6 10,0

Crane
15 24,0 24,5 24,0 22,5 18,7 16,8 15,2 11,6 10,0
16 21,5 22,5 21,5 21,5 17,6 15,9 14,5 11,6 10,0
18 18,2 18,5 17,9 18,8 15,8 14,4 13,0 11,6 10,0
20 15,6 16,1 15,8 13,9 12,7 11,9 11,1 9,7
22 13,3 14,1 13,5 12,6 11,5 10,8 10,3 9,1
24 12,2 11,7 11,6 10,4 9,8 9,4 8,6
26 10,7 10,1 10,8 9,5 8,9 8,6 8,0
28 9,4 9,3 9,5 8,4 8,2 7,9 7,6
30 8,7 8,4 7,5 7,4 7,3 7,1
32 8,0 7,4 6,9 6,5 6,5 6,4
34 6,6 6,2 5,7 5,7 5,7
36 5,9 5,9 4,9 5,3 5,3
38 5,5 4,5 5,0 4,9
* over rear with special equipment

40 4,9 4,2 4,7 4,4


42 4,4 3,9 4,3 3,9
44 3,6 3,9 3,4
46 3,4 3,4 3,0
48 3,1 2,6
50 2,7 2,3
52 2,0
54 1,7

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Radius Length of main boom — 23,5 t counterweight


(m) 12,9* 12,9 17,6 22,3 27,0 31,6 36,3 41,1 45,8 50,6 55,3 60,0

130 Tonne
2,5 130**/110,0
3 94,5 91,5 86,0 81,0 65,0
4 81,0 77,5 76,5 71,0 65,0 50,0
5 70,5 66,5 67,0 63,5 60,5 49,5 38,0
6 62,0 57,5 58,0 57,0 54,5 47,0 37,0 28,0
7 55,0 50,5 51,0 51,0 49,5 44,0 35,0 28,0 20,5 16,0
8 48,0 44,5 45,0 45,0 41,5 40,0 33,0 28,0 20,5 16,0 11,6
9 39,5 39,0 39,5 38,0 36,5 34,5 31,5 26,5 20,5 16,0 11,6 10,0
10 31,5 31,5 34,5 33,0 32,5 30,0 29,5 25,0 20,5 16,0 11,6 10,0
11 29,0 28,5 28,5 26,5 26,5 23,5 20,5 16,0 11,6 10,0
12 25,0 25,5 25,0 24,5 23,5 22,0 19,5 16,0 11,6 10,0
13 22,5 22,5 22,0 22,5 21,0 19,7 18,6 16,0 11,6 10,0
14 19,9 19,9 19,6 20,5 19,1 17,8 17,2 15,8 11,6 10,0
15 17,7 18,0 18,3 17,4 16,7 15,6 15,2 11,6 10,0

Crane
16 16,6 16,8 16,5 15,8 16,0 14,2 14,0 11,6 10,0
18 13,7 13,9 13,5 13,3 13,6 11,9 11,7 11,6 10,0
20 11,6 11,3 11,9 11,4 10,7 9,9 10,0 9,7
22 9,8 9,5 10,1 9,6 9,9 8,5 8,9 8,8
24 6,1 8,1 8,7 8,2 8,5 7,8 8,3 7,6
26 6,9 7,5 7,0 7,3 7,3 7,2 6,6
28 6,0 6,5 6,0 6,3 6,5 6,2 5,7
30 5,7 5,1 5,4 5,7 5,4 4,9
32 5,2 4,5 5,1 4,9 4,6 4,2
34 4,2 4,6 4,3 4,0 3,6
36 3,9 4,0 3,7 3,4 3,0
38 3,5 3,2 2,9 2,5
40 3,1 2,8 2,5 2,1
* over rear with special equipment

42 2,7 2,4 2,1 1,7


44 2,0 1,7 1,3
46 1,7 1,4 1,0
48 1,1
50
52
54
56

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 11m — 40,1 t counterweight
55,3 60,0

130 Tonne
Radius 11m 11m
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
9 6,6
10 6,6 5,3
11 6,6 5,3
12 6,6 5,3
13 6,6 6,6 6,4 5,3
14 6,6 6,6 6,4 5,3 5,3 5,1
15 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,1
16 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
18 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
20 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
22 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
24 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
26 6,4 6,2 6,2 6,2 6,2 5,3 5,3 5,3 5,1 5,1
28 6,0 5,8 5,8 5,8 5,8 5,3 5,2 5,3 5,1 5,1
30 5,6 5,5 5,5 5,5 5,5 5,0 5,0 5,0 5,0 5,0
32 5,3 5,2 5,2 5,2 5,2 4,8 4,7 4,7 4,7 4,7
34 5,0 4,9 4,9 4,9 4,9 4,5 4,4 4,5 4,4 4,5

Crane
36 4,7 4,6 4,7 4,6 4,7 4,2 4,2 4,2 4,2 4,2
38 4,4 4,4 4,4 4,4 4,4 4,0 4,0 4,0 4,0 4,0
40 4,1 4,1 4,2 4,1 4,2 3,7 3,7 3,8 3,7 3,8
42 3,7 3,7 3,9 3,7 3,9 3,5 3,5 3,6 3,5 3,6
44 3,3 3,3 3,5 3,3 3,5 3,4 3,4 3,4 3,4 3,4
46 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,2 3,0 3,2
48 2,8 2,8 2,9 2,8 2,9 2,7 2,7 2,9 2,7 2,9
* Luffing under load

50 2,6 2,7 2,7 2,7 2,7 2,3 2,3 2,5 2,3 2,5
52 2,4 2,4 2,5 2,4 2,5 2,0 2,0 2,2 2,0 2,2
54 2,1 2,1 2,1 1,7 1,7 1,8 1,7 1,8
56 1,9 1,9 1,9 1,4 1,4 1,6 1,4 1,6
58 1,6 1,6 1,6 1,2 1,2 1,2
60 1,4 1,4 1,4 1,0 1,0 1,0
62 1,2

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 11m — 23,5 t counterweight
55,3 60,0

130 Tonne
Radius 11m 11m
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
9 6,6
10 6,6 5,3
11 6,6 5,3
12 6,6 5,3
13 6,6 6,6 6,4 5,3
14 6,6 6,6 6,4 5,3 5,3 5,1
15 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,1
16 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
18 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
20 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
22 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
24 6,6 6,6 6,6 6,4 6,4 5,3 5,3 5,3 5,1 5,1
26 6,1 6,1 6,2 6,1 6,2 5,3 5,3 5,3 5,1 5,1
28 5,3 5,3 5,8 5,3 5,8 5,3 5,2 5,3 5,1 5,1
30 4,9 4,8 5,0 4,8 5,0 4,6 4,6 5,0 4,6 5,0
32 4,6 4,6 4,6 4,6 4,6 4,0 4,0 4,4 4,0 4,4
34 4,0 4,0 4,3 4,0 4,3 3,4 3,4 3,8 3,4 3,8

Crane
36 3,5 3,5 3,8 3,5 3,8 2,9 2,9 3,3 2,9 3,3
38 3,0 3,0 3,3 3,0 3,3 2,5 2,5 2,8 2,5 2,8
40 2,5 2,5 2,8 2,5 2,8 2,0 2,0 2,3 2,0 2,3
42 2,1 2,1 2,4 2,1 2,4 1,7 1,7 1,9 1,7 1,9
44 1,8 1,8 2,0 1,8 2,0 1,3 1,3 1,6 1,3 1,6
46 1,4 1,4 1,6 1,4 1,6 1,0 1,0 1,2 1,0 1,2
48 1,2 1,2 1,3 1,2 1,3 0,9 0,9
* Luffing under load

50 0,9 0,9 1,0 0,9 1,0


52
54
56
58
60
62

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 18m — 40,1 t counterweight
55,3 60,0

130 Tonne
Radius 18m 18m
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
11 4,1
12 4,1 3,6
13 4,1 3,6
14 4,1 3,6
15 4,1 4,0 3,6
16 4,1 4,1 4,0 3,6
18 4,1 4,1 4,0 3,6 3,6 3,3
20 4,1 4,1 4,0 3,6 3,6 3,3
22 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,3
24 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
26 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
28 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
30 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
32 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
34 4,1 4,1 3,9 4,0 3,9 3,6 3,6 3,6 3,3 3,3
36 4,1 4,0 3,9 4,0 3,9 3,6 3,6 3,6 3,3 3,3
38 3,9 3,8 3,8 3,8 3,8 3,5 3,5 3,6 3,3 3,3

Crane
40 3,7 3,7 3,8 3,7 3,8 3,3 3,3 3,5 3,3 3,3
42 3,5 3,5 3,6 3,5 3,6 3,2 3,2 3,3 3,2 3,3
44 3,3 3,3 3,4 3,3 3,4 3,0 3,0 3,1 3,0 3,1
46 3,1 3,1 3,2 3,1 3,2 2,8 2,8 3,0 2,8 3,0
48 2,8 2,8 3,1 2,8 3,1 2,7 2,7 2,8 2,7 2,8
50 2,5 2,5 2,8 2,5 2,8 2,5 2,6 2,7 2,6 2,7
52 2,2 2,3 2,5 2,3 2,5 2,3 2,3 2,5 2,3 2,5
54 2,1 2,2 2,2 2,2 2,2 2,0 2,0 2,3 2,0 2,3
* Luffing under load

56 2,0 2,0 2,0 2,0 2,1 1,7 1,7 2,0 1,7 2,0
58 1,9 1,9 1,8 1,9 2,0 1,5 1,5 1,7 1,5 1,7
60 1,6 1,6 1,6 1,8 1,2 1,2 1,5 1,2 1,5
62 1,4 1,4 1,4 1,0 1,0 1,2 1,0 1,2
64 1,2 1,2 1,2
66 1,0 1,0 1,0
68 0,9 0,9 0,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 18m — 23,5 t counterweight
55,3 60,0

130 Tonne
Radius 18m 18m
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
11 4,1
12 4,1 3,6
13 4,1 3,6
14 4,1 3,6
15 4,1 4,0 3,6
16 4,1 4,1 4,0 3,6
18 4,1 4,1 4,0 3,6 3,6 3,3
20 4,1 4,1 4,0 3,6 3,6 3,3
22 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,3
24 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
26 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
28 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
30 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
32 4,1 4,1 4,0 4,0 4,0 3,6 3,6 3,6 3,3 3,3
34 3,8 3,8 3,9 3,7 3,9 3,6 3,6 3,6 3,3 3,3
36 3,6 3,6 3,7 3,6 3,7 3,2 3,2 3,6 3,3 3,3
38 3,3 3,3 3,5 3,3 3,5 2,7 2,7 3,3 2,7 3,3

Crane
40 2,9 2,9 3,4 2,9 3,4 2,3 2,3 2,9 2,3 2,9
42 2,5 2,5 2,9 2,5 2,9 1,9 1,9 2,5 1,9 2,5
44 2,1 2,1 2,5 2,1 2,5 1,6 1,6 2,1 1,6 2,1
46 1,8 1,8 2,1 1,8 2,1 1,3 1,3 1,7 1,3 1,7
48 1,5 1,5 1,8 1,5 1,8 1,0 1,0 1,4 1,0 1,4
50 1,2 1,2 1,5 1,2 1,5 1,1 1,1
52 0,9 0,9 1,2 0,9 1,2
54 1,0 1,0
* Luffing under load

56
58
60
62
64
66
68

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 26m — 40,1 t counterweight
55,3 60,0

130 Tonne
Radius 26m 26m
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
13 3,1
14 3,1 2,5
15 3,1 2,5
16 3,1 2,5
18 3,1 2,5
20 3,1 3,1 3,1 2,5 2,5 2,5
22 3,1 3,1 3,1 2,5 2,5 2,5
24 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5
26 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,5
28 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,5
30 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,5
32 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,5
34 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,5
36 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,5
38 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,5
40 3,0 3,0 2,8 3,0 2,8 2,5 2,5 2,5 2,5 2,5
42 2,9 2,9 2,8 2,9 2,8 2,5 2,5 2,5 2,5 2,5

Crane
44 2,7 2,7 2,8 2,7 2,8 2,4 2,5 2,5 2,5 2,5
46 2,6 2,6 2,7 2,6 2,7 2,3 2,3 2,5 2,3 2,5
48 2,4 2,5 2,5 2,5 2,5 2,1 2,2 2,3 2,2 2,3
50 2,3 2,3 2,4 2,3 2,4 2,0 2,1 2,2 2,1 2,2
52 2,1 2,2 2,3 2,2 2,3 1,9 2,0 2,1 2,0 2,1
* Luffing under load

54 1,9 1,9 2,2 1,9 2,2 1,8 1,8 2,0 1,8 2,0
56 1,6 1,6 1,9 1,6 1,9 1,7 1,7 1,8 1,7 1,8
58 1,4 1,5 1,6 1,5 1,6 1,5 1,5 1,7 1,5 1,7
60 1,3 1,4 1,5 1,4 1,5 1,2 1,2 1,5 1,2 1,5
62 1,2 1,3 1,4 1,3 1,4 1,0 1,0 1,3 1,0 1,3
64 1,2 1,2 1,3 1,2 1,3 1,0 1,0
66 1,0 1,0 1,2 1,0 1,2

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 26m — 23,5 t counterweight
55,3 60,0

130 Tonne
Radius 26m 26m
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
13 3,1
14 3,1 2,5
15 3,1 2,5
16 3,1 2,5
18 3,1 2,5
20 3,1 3,1 3,1 2,5 2,5 2,5
22 3,1 3,1 3,1 2,5 2,5 2,5
24 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5
26 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,5
28 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,5
30 3,1 3,1 3,0 3,1 3,0 2,5 2,5 2,5 2,5 2,5
32 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,5
34 3,1 3,1 2,9 3,1 2,9 2,5 2,5 2,5 2,5 2,5
36 3,0 3,0 2,9 3,0 2,9 2,5 2,5 2,5 2,5 2,5
38 2,8 2,8 2,9 2,8 2,9 2,5 2,5 2,5 2,5 2,5
40 2,6 2,7 2,8 2,7 2,8 2,2 2,2 2,5 2,2 2,5
42 2,4 2,4 2,7 2,4 2,7 1,8 1,8 2,4 1,8 2,4

Crane
44 2,0 2,0 2,5 2,0 2,5 1,5 1,5 2,0 1,5 2,0
46 1,7 1,7 2,1 1,7 2,1 1,2 1,2 1,7 1,2 1,7
48 1,4 1,4 1,8 1,4 1,8 0,9 0,9 1,3 0,9 1,3
50 1,2 1,2 1,5 1,2 1,5 1,1 1,1
52 0,9 0,9 1,3 0,9 1,3
* Luffing under load

54 1,0 1,0
56
58
60
62
64
66

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 32m — 40,1 t counterweight
55,3 60,0

130 Tonne
Radius 32m 32m
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
14 2,4
15 2,4 1,9
16 2,4 1,9
18 2,4 1,9
20 2,4 2,4 2,4 1,9
22 2,4 2,4 2,4 1,9 1,9 1,9
24 2,4 2,4 2,4 1,9 1,9 1,9
26 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
28 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
30 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
32 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
34 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
36 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,7
38 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,7
40 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,7
42 2,3 2,2 2,0 2,2 2,0 1,9 1,9 1,7 1,9 1,7
44 2,3 2,2 2,0 2,2 2,0 1,9 1,9 1,7 1,9 1,7

Crane
46 2,2 2,1 2,0 2,1 2,0 1,9 1,9 1,7 1,9 1,7
48 2,1 2,1 2,0 2,1 2,0 1,8 1,9 1,7 1,9 1,7
50 1,9 2,0 1,9 2,0 1,9 1,7 1,8 1,7 1,8 1,7
52 1,8 1,9 1,9 1,9 1,9 1,6 1,7 1,7 1,7 1,7
* Luffing under load

54 1,7 1,8 1,8 1,8 1,8 1,5 1,5 1,7 1,5 1,7
56 1,6 1,6 1,7 1,6 1,7 1,3 1,4 1,6 1,4 1,6
58 1,4 1,4 1,6 1,4 1,6 1,3 1,3 1,4 1,3 1,4
60 1,1 1,1 1,4 1,1 1,4 1,2 1,2 1,3 1,2 1,3
62 1,0 1,1 1,2 1,1 1,2 1,0 1,0 1,2 1,0 1,2
64 0,9 1,0 1,0 1,0 1,0 1,0 1,0
66 0,9 0,9 0,9 0,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

GROVE GMK 5130


FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 32m — 23,5 t counterweight
55,3 60,0

130 Tonne
Radius 32m 32m
(m) 0º 20º 40º *0º - 20° *20º - 40° 0º 20º 40º *0º - 20° *20º - 40°
14 2,4
15 2,4 1,9
16 2,4 1,9
18 2,4 1,9
20 2,4 2,4 2,4 1,9
22 2,4 2,4 2,4 1,9 1,9 1,9
24 2,4 2,4 2,4 1,9 1,9 1,9
26 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
28 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
30 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
32 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
34 2,4 2,4 2,1 2,4 2,1 1,9 1,9 1,7 1,9 1,7
36 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,7
38 2,4 2,3 2,0 2,3 2,0 1,9 1,9 1,7 1,9 1,7
40 2,1 2,1 2,0 2,1 2,0 1,9 1,9 1,7 1,9 1,7
42 2,1 2,1 2,0 2,1 2,0 1,7 1,7 1,7 1,7 1,7
44 1,9 1,9 1,9 1,9 1,9 1,4 1,4 1,7 1,4 1,7

Crane
46 1,6 1,6 1,9 1,6 1,9 1,1 1,1 1,6 1,1 1,6
48 1,3 1,3 1,8 1,3 1,8 1,3 1,3
50 1,1 1,1 1,5 1,1 1,5 1,0 1,0
52 1,2 1,2
* Luffing under load

54 1,0 1,0
56
58
60
62
64
66

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
DIMENSIONS

140 Tonne
Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x7,00m 360° 43t

43t Counterweight
m 12,5* 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t
140,0**
3 120,0 107,5 99,1 81,9
4 100,5 96,8 86,0 75,4 58,7
5 88,4 85,0 76,3 68,3 55,4 42,3
6 78,3 75,7 68,2 61,7 52,3 40,2 35,2
7 69,4 68,2 60,1 56,4 49,3 38,4 32,7
8 60,2 59,4 55,4 51,1 46,2 36,5 30,2 26,2
9 51,0 51,7 50,9 45,9 43,0 34,9 27,8 24,5 20,4
10 44,8 44,4 42,9 39,9 33,4 25,5 22,9 19,9 16,3
12 33,6 33,2 34,0 33,2 30,5 22,5 19,8 17,8 15,5 12,2 9,3
14 25,1 27,2 26,8 27,4 26,9 19,6 17,6 15,8 14,3 11,8 9,2
16 22,3 22,1 22,6 21,9 17,4 15,5 14,2 13,1 11,4 8,8
18 16,7 19,4 18,9 18,3 16,3 13,8 12,7 11,9 10,8 8,3
20 16,6 16,2 15,5 15,1 12,6 11,3 10,7 10,0 7,8
22 14,4 14,0 13,4 13,9 11,3 10,4 9,6 9,1 7,3
24 12,2 12,1 12,1 10,3 9,4 8,9 8,3 6,9

Crane
26 10,8 11,2 10,7 9,6 8,5 8,2 7,6 6,4
28 10,0 9,5 9,0 7,7 7,4 7,1 5,9
30 9,0 8,4 8,5 7,2 6,7 6,5 5,5
32 7,5 7,7 6,7 6,2 6,0 5,1
34 6,9 6,9 6,3 5,8 5,4 4,8
36 3,7 6,2 5,9 5,4 5,1 4,4
38 5,6 5,5 5,0 4,7 4,0
40 3,6 5,0 4,7 4,4 3,8
42 4,5 4,3 3,9 3,5
44 2,7 3,8 3,5 3,2
46 2,5 3,4 3,0 3,0
48 2,6 2,7 2,6
50 2,5 2,3 2,3
52 2,0
54 1,7

* over rear
** Capacity class

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x7,00m 360° 32,5t

32,5t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 120,0 107,5 99,1 81,9 - - - - - - - -


4 100,5 96,8 86,0 75,4 58,7 - - - - - - -
5 88,1 85,0 76,3 68,3 55,4 42,3 - - - - - -
6 76,8 75,7 68,2 61,7 52,3 40,2 35,2 - - - - -
7 64,5 64,3 60,1 56,4 49,3 38,4 32,7 - - - - -
8 54,3 53,9 53,6 49,5 46,2 36,5 30,2 26,2 - - - -
9 44,2 44,7 44,3 43,1 41,3 34,9 27,8 24,5 20,4 - - -
10 - 37,5 37,1 38,0 36,2 33,4 25,5 22,9 19,9 16,3 - -
12 - 28,6 28,7 28,3 29,1 28,4 22,5 19,8 17,8 15,5 12,2 9,3
14 - 20,4 22,6 23,4 22,9 22,2 19,6 17,6 15,8 14,3 11,8 9,2
16 - - 19,2 19,1 18,7 18,0 17,4 15,5 14,2 13,1 11,4 8,8
18 - - 13,3 16,0 15,5 15,2 15,5 13,8 12,7 11,9 10,8 8,3
20 - - - 13,6 13,2 13,7 13,1 12,3 11,3 10,7 10,0 7,8
22 - - - 11,8 11,6 11,8 11,2 11,2 10,4 9,6 9,1 7,3
24 - - - - 10,7 10,3 9,7 10,0 9,2 8,9 8,3 6,9

Crane
26 - - - - 9,5 9,0 8,9 8,7 8,2 7,8 7,6 6,4
28 - - - - - 8,0 8,1 7,6 7,6 7,2 7,1 5,9
30 - - - - - 7,1 7,2 6,7 6,6 6,5 6,1 5,5
32 - - - - - - 6,4 6,0 5,8 5,7 5,3 5,1
34 - - - - - - 5,7 5,4 4,9 4,6 4,6 5,7
36 - - - - - - 3,7 5,0 4,7 4,3 3,9 3,9
38 - - - - - - - 4,5 4,2 3,7 3,4 3,4
40 - - - - - - - 3,6 3,7 3,3 2,9 2,9
42 - - - - - - - - 3,3 2,9 2,5 2,4
44 - - - - - - - - 2,7 2,5 2,1 2,0
46 - - - - - - - - 2,5 2,1 1,7 1,7
48 - - - - - - - - - 1,8 1,4 1,4
50 - - - - - - - - - 1,5 1,1 1,1
52 - - - - - - - - - - - 0,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x7,00m 360° 27,2t

27,2t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 120,0 107,5 99,1 81,9


4 100,5 96,8 86,0 75,4 58,7
5 87,7 85,0 76,3 68,3 55,4 42,3
6 74,1 73,9 68,2 61,7 52,3 40,2 35,2
7 61,8 61,6 58,2 53,4 49,3 38,4 32,7
8 49,0 49,6 48,6 46,6 43,3 36,5 30,2 26,2
9 39,8 40,3 40,1 40,2 37,3 34,9 27,8 24,5 20,4
10 34,5 34,6 34,2 33,5 32,2 25,5 22,9 19,9 16,3
12 26,2 25,8 26,7 26,2 25,5 22,5 19,8 17,8 15,5 12,2 9,3
14 18,1 21,1 21,0 20,6 19,9 19,4 17,6 15,8 14,3 11,8 9,2
16 17,2 17,1 16,7 16,7 16,6 15,5 14,2 13,1 11,4 8,8
18 11,5 14,2 13,9 14,4 13,8 13,1 12,7 11,9 10,8 8,3
20 12,1 12,6 12,2 11,5 11,8 10,9 10,7 10,0 7,8
22 10,3 10,8 10,4 10,3 10,0 9,7 9,1 9,1 7,3
24 9,4 9,0 9,1 8,6 8,6 8,4 8,1 6,9

Crane
26 8,2 7,9 8,0 7,6 7,4 7,3 6,9 6,4
28 7,4 7,0 7,0 6,7 6,3 5,9 5,9
30 6,6 6,1 6,1 5,8 5,4 5,0 5,0
32 5,5 5,3 5,0 4,6 4,3 4,2
34 5,1 4,7 4,4 4,0 3,6 3,6
36 3,7 4,1 3,8 3,4 3,0 3,0
38 3,7 3,4 2,9 2,5 2,5
40 3,3 2,9 2,5 2,1 2,1
42 2,5 2,1 1,7 1,7
44 2,2 1,7 1,3 1,3
46 1,9 1,4 1,0 1,0
48 1,1 0,7
50 0,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x7,00m 360° 22,8t

22,8t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 120,0 107,5 99,1 81,9


4 100,5 96,8 86,0 75,4 58,7
5 87,3 85,0 76,3 68,3 55,4 42,3
6 71,5 71,1 65,4 59,9 52,3 40,2 35,2
7 57,4 57,7 53,4 50,3 46,9 38,4 32,7
8 44,7 45,2 44,4 42,9 39,6 36,5 30,2 26,2
9 36,2 37,5 37,7 36,8 35,6 33,5 27,8 24,5 20,4
10 31,4 31,5 31,6 31,6 29,4 25,5 22,9 19,9 16,3
12 23,8 24,4 24,3 23,8 23,1 21,9 19,8 17,8 15,5 12,2 9,3
14 16,1 19,1 19,1 18,6 18,2 18,6 16,9 15,8 14,3 11,8 9,2
16 15,5 15,4 15,0 15,6 14,9 14,3 13,6 13,1 11,4 8,8
18 9,9 12,7 13,3 12,8 12,4 12,5 11,9 11,3 10,8 8,3
20 11,1 11,2 10,8 11,0 10,4 10,4 10,0 9,8 7,8
22 9,8 9,6 9,4 9,3 9,0 9,0 8,7 8,3 7,3
24 8,3 8,4 8,0 8,0 7,7 7,3 7,0 6,7

Crane
26 7,2 7,3 7,0 6,9 6,6 6,2 5,8 5,7
28 6,4 6,3 6,0 5,7 5,3 4,9 4,8
30 5,7 5,5 5,2 4,9 4,5 4,1 4,1
32 4,8 4,6 4,3 3,8 3,4 3,4
34 4,2 4,0 3,7 3,2 2,8 2,8
36 3,7 3,5 3,1 2,7 2,3 2,3
38 3,0 2,7 2,2 1,8 1,8
40 2,6 2,3 1,8 1,4 1,4
42 1,9 1,4 1,1 1,0
44 1,6 1,1 0,7 0,7
46 1,3 0,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x7,00m 360° 10,8t

10,8t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 119,5 107,5 99,1 81,9


4 100,5 96,8 86,0 75,4 58,7
5 80,1 71,7 65,5 58,3 54,4 42,3
6 59,4 55,0 51,4 47,5 43,0 40,2 35,2
7 42,9 44,5 41,7 39,0 37,4 34,2 31,8
8 33,1 34,8 34,6 33,8 31,5 28,9 27,1 25,2
9 26,6 28,6 29,2 29,0 27,0 25,3 23,5 22,1 20,4
10 23,7 24,3 24,3 23,2 22,4 20,9 19,1 18,4 16,3
12 17,0 17,6 17,5 18,2 17,7 16,9 15,8 15,2 13,6 12,2 9,3
14 10,2 13,7 14,2 14,0 13,9 13,8 13,4 12,6 11,6 10,7 9,2
16 11,0 11,3 11,2 11,3 11,2 10,9 10,3 9,4 8,6 8,3
18 7,8 9,2 9,4 9,2 9,1 8,8 8,5 7,7 7,0 6,7
20 7,7 7,8 7,8 7,6 7,4 6,9 6,3 5,6 5,3
22 6,5 6,6 6,5 6,4 6,1 5,7 5,1 4,4 4,1
24 5,7 5,5 5,3 5,0 4,7 4,1 3,5 3,2

Crane
26 4,8 4,6 4,4 4,2 3,8 3,3 2,7 2,5
28 3,9 3,7 3,4 3,1 2,6 2,1 1,8
30 3,3 3,1 2,8 2,5 2,0 1,5 1,3
32 2,6 2,3 1,9 1,5 1,0 0,8
34 2,1 1,8 1,5 1,0
36 1,7 1,4 1,1
38 1,1 0,7
40 0,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x7,00m 360° 8,2t

8,2t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 119,0 107,5 99,1 81,9


4 100,0 96,8 82,7 74,2 58,7
5 75,9 68,2 61,1 56,8 50,7 42,3
6 55,2 51,3 48,3 44,3 42,4 38,5 35,2
7 39,7 41,4 38,8 37,6 34,8 31,7 29,7
8 30,5 32,8 33,4 31,5 29,3 27,2 24,7 23,5
9 24,3 26,4 27,1 26,8 24,6 23,5 22,0 20,1 18,8
10 21,6 22,3 22,2 21,3 20,9 19,1 18,5 17,1 15,6
12 15,4 16,0 16,8 16,6 16,0 15,7 15,0 14,1 13,0 12,0 9,3
14 8,9 12,6 12,9 12,8 12,9 12,6 12,0 11,2 10,3 9,4 9,0
16 10,0 10,2 10,4 10,2 10,1 9,8 9,1 8,2 7,5 7,2
18 7,8 8,4 8,4 8,4 8,2 8,0 7,4 6,6 5,9 5,6
20 6,9 7,1 6,9 6,8 6,5 6,0 5,3 4,6 4,2
22 5,8 5,9 5,7 5,6 5,3 4,8 4,1 3,5 3,2
24 4,9 4,7 4,6 4,3 3,9 3,2 2,6 2,4

Crane
26 4,1 3,9 3,8 3,5 3,1 2,5 1,9 1,7
28 3,2 3,1 2,8 2,4 1,9 1,3 1,1
30 2,7 2,5 2,2 1,9 1,3 0,8
32 2,0 1,7 1,4 0,9
34 1,6 1,3 1,0
36 1,2 0,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x7,00m 360° 6,3t

6,3t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 119,0 107,5 99,1 81,9


4 99,5 92,7 79,3 70,3 58,7
5 72,0 64,7 57,9 53,9 48,0 42,3
6 52,2 49,3 45,8 41,9 40,2 36,4 33,6
7 37,5 39,2 36,7 35,6 32,9 30,5 27,7 22,5
8 28,8 31,0 31,6 29,8 27,4 25,9 24,2 21,8 18,2
9 22,6 24,7 25,4 25,0 22,9 22,7 20,7 19,9 18,0
10 20,2 20,8 20,8 21,2 19,5 18,9 17,2 16,7 14,3
12 14,4 15,4 15,7 15,6 15,7 14,6 14,0 13,0 11,9 11,0 9,3
14 7,9 11,7 12,0 12,2 12,0 12,0 11,1 10,3 9,4 8,6 8,2
16 9,2 9,6 9,6 9,6 9,4 9,0 8,3 7,4 6,6 6,3
18 7,6 7,7 7,9 7,8 7,6 7,3 6,7 5,9 5,1 4,7
20 6,3 6,5 6,4 6,2 5,9 5,3 4,5 3,8 3,5
22 5,2 5,4 5,2 5,0 4,7 4,2 3,5 2,8 2,5
24 4,4 4,2 4,0 3,7 3,3 2,6 2,0 1,8

Crane
26 3,6 3,4 3,3 3,0 2,6 2,0 1,4 1,1
28 2,8 2,6 2,3 2,0 1,4 0,8
30 2,3 2,1 1,8 1,4 0,9
32 1,6 1,3 1,0
34 1,2 0,9
36 0,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x7,00m 360° 0t

0t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 118,0 107,5 98,8 80,7


4 90,5 77,1 64,0 56,6 48,7
5 58,9 53,6 47,3 43,8 37,9 34,2
6 37,8 40,5 37,1 33,2 29,9 27,8 25,1
7 26,6 29,2 29,0 26,3 25,3 22,8 21,3 19,8
8 19,6 21,8 22,5 22,8 21,0 19,9 18,5 16,8 14,8
9 15,1 17,0 18,2 18,6 18,3 16,9 15,8 14,3 13,0
10 13,8 14,9 15,2 15,4 14,6 13,6 12,2 11,1 9,7
12 9,5 10,7 10,9 11,1 10,9 10,2 9,2 8,3 7,2 6,3 5,8
14 4,3 7,8 8,1 8,3 8,1 7,9 7,0 6,3 5,3 4,5 4,2
16 5,9 6,1 6,3 6,2 6,0 5,4 4,8 3,9 3,2 2,9
18 4,6 4,8 5,0 4,8 4,7 4,2 3,6 2,8 2,2 2,0
20 3,8 3,9 3,8 3,6 3,3 2,7 2,0 1,4 1,1
22 3,0 3,1 3,0 2,9 2,5 1,9 1,3
24 2,5 2,4 2,2 1,9 1,3

Crane
26 2,0 1,8 1,6 1,3 0,8
28 1,3 1,1 0,8
30 0,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x5,30m 360° 40,4t

40,4t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 115,0 107,5 99,1 81,9


4 95,6 95,4 86,0 75,4 58,7
5 81,4 81,2 76,3 68,3 55,4 42,3
6 69,2 68,8 65,4 60,1 52,3 40,2 35,2
7 52,1 52,6 52,3 50,3 47,5 38,4 32,7
8 41,4 41,9 42,8 42,4 40,6 36,5 30,2 26,2
9 34,1 35,2 35,3 35,0 35,6 34,5 27,8 24,5 20,4
10 30,3 29,9 30,8 30,3 29,7 25,5 22,9 19,9 16,3
12 23,0 23,4 23,4 22,9 22,3 21,9 19,8 17,8 15,5 12,2 9,3
14 16,0 18,6 18,6 18,2 18,2 18,1 17,1 15,8 14,3 11,8 9,2
16 15,3 15,2 15,0 15,3 14,8 14,3 14,0 13,1 11,4 8,8
18 10,4 12,7 13,2 12,8 12,4 12,5 12,0 11,7 10,8 8,3
20 11,1 11,3 10,9 11,1 10,6 10,4 10,0 10,0 7,8
22 9,9 9,8 9,4 9,6 9,1 9,1 9,0 8,7 7,3
24 8,5 8,6 8,3 8,2 8,1 7,8 7,5 6,9

Crane
26 7,5 7,6 7,3 7,3 7,1 6,7 6,5 6,4
28 6,8 6,5 6,4 6,2 5,9 5,6 5,6
30 6,1 5,9 5,7 5,5 5,2 4,9 4,9
32 5,3 5,1 4,8 4,6 4,3 4,2
34 4,8 4,5 4,3 4,0 3,7 3,7
36 3,7 4,0 3,8 3,5 3,2 3,2
38 3,7 3,4 3,1 2,8 2,8
40 3,3 3,1 2,7 2,4 2,4
42 2,7 2,4 2,0 2,0
44 2,4 2,0 1,6 1,6
46 2,1 1,7 1,3 1,3
48 1,4 1,0 1,0
50 1,1 0,7 0,7

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MAIN BOOM

12,5-60m 7,20x4,50m 360° 22,8t

22,8t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 106,0 105,5 85,5 73,9


4 82,4 71,8 62,1 56,5 49,0
5 53,4 53,6 48,9 45,3 41,2 37,3
6 37,7 39,9 39,7 37,2 33,8 31,0 29,1
7 28,7 30,6 31,2 31,0 28,3 26,6 24,8 22,5
8 22,8 24,5 25,1 25,0 24,8 23,6 22,0 20,6 18,2
9 18,7 20,3 20,8 21,0 21,4 20,6 19,9 18,3 17,2
10 17,1 17,8 18,3 18,2 18,1 17,6 16,8 15,7 14,2
12 12,8 13,6 13,8 14,0 13,9 13,8 13,5 12,6 11,5 10,6 9,3
14 7,8 10,7 11,0 11,1 11,0 10,9 10,6 10,3 9,4 8,6 8,2
16 8,7 8,9 9,1 8,9 8,8 8,6 8,3 7,7 7,0 6,7
18 7,2 7,4 7,5 7,4 7,3 7,1 6,8 6,3 5,7 5,4
20 6,2 6,3 6,2 6,1 5,9 5,6 5,2 4,6 4,4
22 5,2 5,4 5,2 5,1 4,9 4,6 4,2 3,7 3,5
24 4,6 4,4 4,3 4,1 3,9 3,5 3,0 2,8

Crane
26 3,9 3,8 3,7 3,5 3,2 2,8 2,3 2,2
28 3,3 3,1 2,9 2,7 2,3 1,8 1,6
30 2,8 2,7 2,5 2,2 1,7 1,3 1,1
32 2,3 2,0 1,7 1,3 0,9
34 1,9 1,6 1,3 0,9
36 1,5 1,3 0,9
38 0,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
TELESCOPING CAPACITIES

16,8-55,5m 360°

360°
m 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5

140 Tonne
t t t t t t t t t t

3 37,9 35,0 32,0


4 37,3 34,1 30,5 29,9
5 36,8 33,2 29,6 28,8 26,9
6 36,5 32,5 28,7 26,6 25,7 23,8
7 35,0 30,8 27,9 25,5 24,8 21,7
8 35,0 30,2 27,2 24,8 22,9 20,9 20,2
9 34,3 28,5 26,6 24,3 21,8 20,1 19,5 16,9
10 33,6 28,2 26,0 24,3 20,4 19,5 18,8 16,5 12,8
12 33,5 27,8 25,0 21,4 18,7 18,3 16,8 14,9 12,2 7,1
14 25,1 26,1 22,1 20,5 17,7 17,0 15,1 13,3 11,6 6,3
16 22,3 21,6 19,8 16,9 15,7 13,4 12,1 10,8 5,5
18 16,7 18,3 18,9 15,1 14,6 12,0 10,9 9,9 4,9
20 16,5 16,2 14,6 13,6 11,0 9,8 9,0 4,3
22 14,4 14,0 13,4 12,6 10,1 9,0 8,1 3,8
24 12,2 11,6 11,9 9,3 8,3 7,6 3,3

Crane
26 10,8 10,2 10,7 8,6 7,6 7,0 2,3
28 9,7 9,5 8,1 6,9 6,5 1,5
30 9,0 8,4 7,6 6,5 5,9 0,9
32 7,5 7,1 6,1 5,5
34 6,7 6,8 5,7 5,2
36 6,2 5,3 4,9
38 5,6 5,1 4,5
40 3,2 4,8 4,2
42 4,5 4,0
44 3,7
46 3,4
48 2,4
50 2,2

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
HAV

12,5m 7,20x7,00m 9,1-17,0m 360° 43t 51,2m 7,20x7,00m 9,1-17,0m 360° 43t

0°- 0°-
40° 40°

43t Counterweight 43t Counterweight


12,5m 51,2m

140 Tonne
9,1m 17,0m 9,1m 17,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
m t t t t t t m t t t t t t
3 16,2 10,6 12 10,2
4 16,2 9,8 14 9,9 5,6
5 15,4 11,5 9,1 16 9,5 8,0 5,4
6 14,4 10,8 8,4 18 9,2 7,7 6,5 5,1
7 13,4 10,2 7,8 20 8,7 7,5 6,4 4,9 4,0
8 12,6 9,7 7,8 7,3 22 8,1 7,5 6,3 4,7 3,8
9 11,7 9,3 7,5 6,8 5,5 24 7,5 6,9 6,2 4,5 3,7 3,1
10 10,9 8,9 7,3 6,4 5,2 26 6,9 6,6 6,1 4,4 3,5 3,1
12 9,7 8,2 6,8 5,8 4,8 28 6,3 6,3 6,0 4,2 3,4 3,0
14 8,7 7,6 6,4 5,2 4,4 3,8 30 5,9 5,9 5,9 4,0 3,3 2,9
16 8,0 7,2 6,3 4,7 4,0 3,5 32 5,4 5,5 5,6 3,9 3,2 2,9
18 7,4 7,2 4,3 3,8 3,4 34 5,0 5,1 5,2 3,7 3,1 2,8
20 3,9 3,5 3,2 36 4,5 4,7 4,8 3,6 3,1 2,8
22 3,6 3,3 3,1 38 4,1 4,3 4,4 3,5 3,0 2,7

Crane
24 3,4 3,2 3,1 40 3,9 3,9 4,0 3,4 2,9 2,7
26 3,1 42 3,6 3,6 3,7 3,2 2,9 2,7
44 3,4 3,4 3,4 3,1 2,8 2,7
46 3,1 3,2 3,2 2,9 2,7 2,7
48 2,8 2,9 3,0 2,7 2,6 2,6
50 2,4 2,5 2,6 2,5 2,5 2,5
52 2,1 2,2 1,6 2,3 2,3 2,4
54 1,8 1,9 1,5 2,0 2,2 2,2
56 1,4 1,4 1,8 2,0 2,1
58 1,2 1,2 1,5 1,7 1,8
60 1,3 1,4 1,0
62 1,1 1,2 0,9
64 0,8 0,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
HAV

55,5m 7,20x7,00m 9,1-17,0m 360° 43t 60,0m 7,20x7,00m 9,1-17,0m 360° 43t

0°- 0°-
40° 40°

43t Counterweight 43t Counterweight


55,5m 60,0m

140 Tonne
9,1m 17,0m 9,1m 17,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
m t t t t t t m t t t t t t
14 7,7 5,1 14 6,0
16 7,4 4,9 16 6,0 3,9
18 7,2 7,0 4,7 18 5,9 5,7 3,9
20 7,0 6,8 6,2 4,6 3,8 20 5,6 5,5 5,4 3,8
22 6,7 6,5 6,1 4,4 3,7 22 5,4 5,3 5,2 3,7 3,5
24 6,4 6,3 6,0 4,3 3,5 24 5,2 5,1 5,0 3,6 3,4
26 6,1 6,0 5,9 4,1 3,4 3,0 26 4,9 4,9 4,8 3,5 3,3 2,9
28 5,9 5,8 5,6 4,0 3,3 2,9 28 4,6 4,6 4,6 3,5 3,2 2,8
30 5,6 5,5 5,4 3,8 3,2 2,9 30 4,4 4,4 4,4 3,3 3,1 2,8
32 5,2 5,2 5,2 3,7 3,2 2,8 32 4,1 4,2 4,2 3,2 3,0 2,7
34 4,8 4,9 4,9 3,6 3,1 2,8 34 3,8 3,9 4,0 3,1 2,9 2,7
36 4,5 4,5 4,6 3,4 3,0 2,7 36 3,6 3,7 3,8 3,0 2,8 2,6
38 4,1 4,2 4,2 3,3 2,9 2,7 38 3,3 3,4 3,5 2,8 2,7 2,6
40 3,7 3,8 3,9 3,1 2,8 2,7 40 3,1 3,2 3,3 2,6 2,6 2,5

Crane
42 3,4 3,5 3,6 3,0 2,8 2,6 42 2,8 2,9 3,0 2,4 2,5 2,5
44 3,2 3,2 3,3 2,9 2,7 2,6 44 2,5 2,7 2,7 2,3 2,3 2,4
46 2,8 3,0 3,1 2,7 2,6 2,6 46 2,3 2,4 2,5 2,1 2,2 2,3
48 2,4 2,6 2,7 2,5 2,6 2,5 48 2,2 2,2 2,3 1,9 2,0 2,1
50 2,0 2,2 2,3 2,3 2,5 2,5 50 1,9 2,1 2,1 1,7 1,9 2,0
52 1,7 1,9 1,9 1,9 2,3 2,3 52 1,6 1,8 1,9 1,6 1,7 1,7
54 1,4 1,6 1,6 1,7 2,0 2,2 54 1,3 1,5 1,6 1,5 1,6 1,7
56 1,2 1,3 1,4 1,7 1,8 56 1,1 1,2 1,2 1,3 1,5 1,5
58 0,9 1,0 1,1 1,4 1,5 58 0,8 0,9 1,0 1,0 1,3 1,4
60 0,9 1,1 1,2 60 0,8 1,0 1,2
62 0,9 0,9 62 0,8 0,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
HAV

12,5m 7,20x7,00m 9,1-17,0m 360° 6,3t 51,2m 7,20x7,00m 9,1-17,0m 360° 6,3t

0°- 0°-
40° 40°

6,3t Counterweight 6,3t Counterweight


12,5m 51,2m

140 Tonne
9,1m 17,0m 9,1m 17,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
m t t t t t t m t t t t t t
3 16,2 10,6 12 10,2
4 16,2 9,8 14 8,3 5,6
5 15,4 11,5 9,1 16 6,8 7,8 5,4
6 14,4 10,8 8,4 18 5,3 6,2 6,5 5,0
7 13,4 10,2 7,8 20 4,1 5,0 5,6 4,0 4,0
8 12,6 9,7 7,8 7,3 22 3,0 3,8 4,5 3,0 3,8
9 11,7 9,3 7,5 6,8 5,5 24 2,2 2,9 3,5 2,2 3,5 3,1
10 10,9 8,9 7,3 6,4 5,2 26 1,5 2,1 2,6 1,6 2,7 3,1
12 9,7 8,2 6,8 5,8 4,8 28 1,0 1,5 1,9 1,0 2,0 2,9
14 8,7 7,6 6,4 5,2 4,4 3,8 30 1,0 1,4 1,4 2,3
16 8,0 7,2 6,3 4,7 4,0 3,5 32 0,9 1,0 1,7
18 7,4 7,2 4,3 3,8 3,4 34 1,2
20 3,9 3,5 3,2 36 0,8
22 3,6 3,3 3,1

Crane
24 3,4 3,2 3,1
26 3,1

55,5m 7,20x7,00m 9,1-17,0m 360° 6,3t 60,0m 7,20x7,00m 9,1-17,0m 360° 6,3t

0°- 0°-
40° 40°

6,3t Counterweight 6,3t Counterweight


55,5m 60,0m
9,1m 17,0m 9,1m 17,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
m t t t t t t m t t t t t t
14 7,7 5,1 14 6,0
16 6,0 4,9 16 5,7 3,9
18 4,6 5,6 4,5 18 4,1 5,2 3,9
20 3,4 4,3 5,1 3,3 3,8 20 2,9 3,9 4,7 2,8
22 2,4 3,2 3,9 2,3 3,7 22 2,0 2,8 3,5 1,9
24 1,6 2,3 2,9 1,5 2,9 24 1,2 2,0 2,6 1,1
26 0,9 1,6 2,1 0,9 2,1 3,0 26 1,2 1,8
28 1,0 1,4 1,5 2,4 28 1,2
30 0,9 0,9 1,8
32 1,3
34 0,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
HAV-VA

12,5m 7,20x7,00m 25-33m 360° 43t 51,2m 7,20x7,00m 25-33m 360° 43t

0°- 0°-
40° 40°

43t Counterweight 43t Counterweight


12,5m 51,2m

140 Tonne
25,0m 33,0m 25,0m 33,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
m t t t t t t m t t t t t t
5 9,0 16 4,4
6 8,5 18 4,4 2,9
7 8,0 7,4 20 4,3 2,9
8 7,6 6,9 22 4,2 3,6 2,9
9 7,2 6,5 24 4,1 3,5 2,8
10 6,9 6,1 26 3,9 3,4 2,9 2,7 2,6
12 6,3 4,9 5,3 28 3,8 3,3 2,9 2,7 2,5
14 5,7 4,6 4,8 4,4 30 3,7 3,2 2,8 2,6 2,4 2,3
16 5,2 4,3 3,6 4,3 4,0 32 3,6 3,1 2,8 2,5 2,3 2,2
18 4,8 4,0 3,5 3,8 3,6 3,5 34 3,5 3,0 2,8 2,4 2,2 2,1
20 4,4 3,8 3,4 3,5 3,3 3,2 36 3,3 3,0 2,7 2,3 2,1 2,0
22 4,0 3,6 3,2 3,2 3,0 2,9 38 3,1 2,9 2,7 2,1 2,0 1,9
24 3,7 3,4 3,2 2,8 2,8 2,7 40 2,9 2,8 2,7 2,0 1,9 1,9
26 3,5 3,3 3,1 2,6 2,5 2,5 42 2,7 2,7 2,6 1,9 1,8 1,8

Crane
28 3,2 3,1 3,0 2,4 2,3 2,3 44 2,5 2,5 2,5 1,8 1,8 1,8
30 3,0 2,9 2,9 2,2 2,1 2,2 46 2,3 2,4 2,4 1,7 1,7 1,7
32 2,8 2,8 2,9 2,0 2,0 2,0 48 2,1 2,2 2,3 1,6 1,6 1,6
34 1,8 1,9 1,9 50 2,0 2,1 2,1 1,5 1,5 1,5
36 1,7 1,7 1,8 52 1,8 1,9 2,0 1,4 1,4 1,5
38 1,6 1,6 1,7 54 1,6 1,8 1,8 1,3 1,3 1,4
40 1,5 1,5 56 1,5 1,6 1,7 1,2 1,3 1,
58 1,4 1,4 1,5 0,9 1,2 1,2
60 1,1 1,3 1,4 0,8 1,0 1,1
62 0,9 1,1 1,2 0,7 0,8 0,9
64 0,7 0,9 1,0 0,7
66 0,7 0,7

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
HAV-VA

55,5m 7,20x7,00m 25-33m 360° 43t 60,0m 7,20x7,00m 25-33m 360° 43t

0°- 0°-
40° 40°

43t Counterweight 43t Counterweight


55,5m 60,0m

140 Tonne
25,0m 33,0m 25,0m 33,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
m t t t t t t m t t t t t t
16 3,4 18 2,4
18 3,3 20 2,4 1,2
20 3,3 2,0 22 2,4 1,2
22 3,2 2,0 24 2,3 1,2
24 3,1 3,1 1,9 26 2,3 2,2 1,2 1,2
26 3,0 3,0 1,9 1,9 28 2,2 2,2 1,2 1,2
28 2,9 2,9 2,8 1,8 1,8 30 2,2 2,1 2,1 1,1 1,2
30 2,8 2,8 2,7 1,7 1,8 1,8 32 2,1 2,0 2,0 1,1 1,2 1,2
32 2,7 2,6 2,6 1,7 1,7 1,7 34 2,0 1,9 1,9 1,1 1,1 1,2
34 2,6 2,6 2,6 1,6 1,6 1,7 36 1,9 1,8 1,8 1,0 1,1 1,1
36 2,5 2,5 2,5 1,5 1,5 1,6 38 1,8 1,8 1,8 1,0 1,0 1,1
38 2,4 2,4 2,4 1,5 1,5 1,5 40 1,7 1,7 1,7 0,9 0,9 1,0
40 2,3 2,3 2,3 1,4 1,4 1,5 42 1,6 1,6 1,6 0,8 0,9 0,9
42 2,2 2,2 2,2 1,3 1,4 1,4 44 1,5 1,5 1,5 0,8 0,8 0,9

Crane
44 2,1 2,1 2,1 1,3 1,3 1,3 46 1,4 1,4 1,5 0,7 0,8 0,8
46 2,0 2,0 2,0 1,2 1,2 1,3 48 1,3 1,3 1,4 0,7 0,8
48 1,9 1,9 1,9 1,2 1,2 1,2 50 1,2 1,2 1,3 0,7
50 1,8 1,8 1,8 1,1 1,1 1,2 52 1,0 1,1 1,2
52 1,6 1,7 1,8 1,1 1,1 1,1 54 0,9 1,0 1,1
54 1,5 1,6 1,7 1,0 1,0 1,1 56 0,8 0,9 1,0
56 1,3 1,5 1,6 0,9 1,0 1,0 58 0,8 0,9
58 1,0 1,3 1,4 0,9 0,9 1,0 60 0,7 0,8
60 0,8 1,1 1,3 0,7 0,9 0,9
62 0,8 1,0 0,8 0,9
64 0,7 0,7

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MS

12,5-60,0m 7,20x7,00m 360° 43t

43t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 32,0 32,0 32,0


4 32,0 32,0 32,0 32,0
5 32,0 32,0 32,0 32,0 32,0
6 32,0 32,0 32,0 32,0 32,0 32,0
7 32,0 32,0 32,0 32,0 32,0 32,0
8 32,0 32,0 32,0 32,0 32,0 31,1 28,2
9 32,0 32,0 32,0 32,0 32,0 30,1 26,1 23,1
10 32,0 32,0 32,0 32,0 32,0 29,0 24,3 21,4 18,5
12 32,0 32,0 30,7 32,0 26,8 21,1 18,8 17,1 13,7 11,3
14 27,0 26,7 27,3 26,6 24,5 18,7 16,6 15,1 13,0 11,0 8,3
16 22,6 22,3 22,1 22,2 16,4 14,8 13,5 12,0 10,5 8,1
18 18,9 18,6 19,1 18,5 14,8 13,1 12,2 11,1 10,0 7,7
20 6,2 16,7 16,3 15,7 13,4 11,8 10,9 10,1 9,4 7,3
22 14,5 14,1 13,5 12,0 10,8 9,8 9,1 8,6 6,8
24 6,2 12,3 11,7 11,1 9,8 9,0 8,2 7,9 6,4

Crane
26 10,8 10,2 10,6 8,7 8,2 7,6 7,2 6,0
28 8,4 9,4 9,4 8,2 7,4 7,0 6,7 5,5
30 8,9 8,3 7,7 6,7 6,4 6,2 5,2
32 7,0 7,4 7,3 6,3 5,7 5,7 4,8
34 6,5 6,7 5,8 5,4 5,2 4,4
36 5,9 6,0 5,4 5,0 4,7 4,1
38 3,0 5,3 5,0 4,7 4,4 3,7
40 4,8 4,7 4,3 4,1 3,4
42 3,0 4,2 4,0 3,6 3,2
44 3,8 3,5 3,1 2,9
46 2,2 3,1 2,7 2,6
48 2,7 2,3 2,3
50 2,2 2,0 1,9
52 2,0 1,7 1,6
54 1,3
56 1,1

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC140-1
MS

12,5-60,0m 7,20x7,00m 360° 6,3t

6,3t Counterweight
m 12,5 16,8 21,1 25,4 29,7 34,3 38,3 42,6 46,9 51,2 55,5 60,0

140 Tonne
t t t t t t t t t t t t

3 32,0 32,0 32,0


4 32,0 32,0 32,0 32,0
5 32,0 32,0 32,0 32,0 32,0
6 32,0 32,0 32,0 32,0 32,0 32,0
7 32,0 32,0 32,0 32,0 32,0 30,1
8 30,3 31,4 30,6 29,9 27,7 25,6 23,2
9 23,9 25,1 26,2 25,3 23,3 21,8 20,5 18,7
10 19,3 21,0 21,5 21,4 19,9 18,9 17,6 17,0 15,5
12 14,9 15,4 15,3 15,8 15,0 14,5 13,8 12,9 11,7 10,7
14 11,2 12,0 12,2 12,0 12,1 11,8 10,9 10,2 9,1 8,3 7,9
16 9,4 9,6 9,7 9,5 9,4 8,8 8,1 7,1 6,4 6,0
18 7,5 7,8 7,8 7,7 7,5 7,1 6,5 5,6 4,9 4,5
20 6,2 6,3 6,5 6,3 6,1 5,7 5,2 4,3 3,6 3,2
22 5,1 5,2 5,0 4,9 4,5 4,0 3,2 2,6 2,2
24 4,1 4,3 4,1 3,9 3,5 3,1 2,4 1,7 1,4

Crane
26 3,5 3,3 3,1 2,7 2,4 1,7 1,1 0,8
28 2,8 2,6 2,4 2,1 1,7 1,1
30 2,1 1,9 1,5 1,2
32 1,6 1,4 1,0
34 1,0

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC200-1
DIMENSIONS

200 Tonne
Crane
* with 9 t counterweight

Overall Vehicle Width 3m

HOOKBLOCK

Vehicle weight 65,0000kg Capacity 9,9te 29,4te 67,3te 103,7te 138,7te 147,2te
Weight 350kg 600kg 850kg 1125kg 1500kg 1750kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC200-1
MAIN BOOM DUTIES

Main Boom — 69 t counterweight — 360o


Radius 12,4* 12,4 16,6 20,9 25,1 29,4 33,6 37,9 42,1 46,4 50,6 54,9 59,1 63,4 67,8
(m) 200,00**
3 147,0 147,0 146,5 146,0 121,0

200 Tonne
3,5 146,5 135,0 135,5 134,5 121,0
4 136,0 125,0 125,0 124,5 121,0 94,8
4,5 127,0 116,0 116,0 116,0 115,0 94,8
5 119,0 108,0 108,0 108,0 107,0 94,8 73,7
6 104,5 94,8 94,9 94,5 93,7 93,0 73,6
7 92,2 84,0 84,2 83,8 83,0 83,6 70,4 52,8
8 79,7 75,3 75,5 75,0 74,8 74,9 67,1 50,8 44,9
9 64,7 64,7 68,5 67,8 68,3 67,7 63,8 48,8 42,1 37,5
10 62,7 61,7 62,2 61,6 60,4 47,0 39,2 35,0 30,8
12 53,0 52,5 52,5 51,9 52,7 44,0 34,1 30,8 27,7 24,0
14 44,6 44,1 44,6 44,2 40,9 30,4 27,3 24,8 22,1 19,6 15,6
16 38,0 37,5 38,3 37,5 37,9 26,8 24,6 22,3 20,1 18,2 15,6 12,0
18 32,2 33,1 32,3 33,1 24,1 21,9 20,3 18,4 16,8 14,7 12,0

Crane
20 29,0 28,3 29,2 28,3 22,0 19,7 18,3 16,9 15,6 13,7 11,9
22 24,5 25,3 24,5 19,9 18,2 16,5 15,5 14,5 12,9 11,4
24 22,9 22,2 21,4 18,5 16,6 15,3 14,0 13,4 12,1 10,8
26 19,7 18,9 17,5 15,0 14,1 13,0 12,3 11,4 10,2
28 17,6 16,8 16,6 13,7 12,9 12,1 11,5 10,6 9,7
30 15,0 15,0 15,7 12,8 11,7 11,2 10,7 9,9 9,1
32 14,2 14,1 11,9 10,9 10,2 10,0 9,4 8,6
34 13,6 12,8 11,1 10,1 9,4 9,2 8,8 8,1
36 11,7 10,6 9,4 8,8 8,4 8,2 7,6
38 10,7 10,3 8,8 8,2 7,9 7,6 7,1
40 9,9 8,4 7,6 7,4 7,1 6,7
42 9,2 8,1 7,0 6,9 6,7 6,2
44 7,8 6,7 6,4 6,3 5,8
46 7,5 6,4 5,9 5,9 5,4
48 6,1 5,6 5,5 5,1
50 5,9 5,3 5,1 4,8
54 4,8 4,5 4,1
58 3,7 3,6
* over rear

62 2,9
66

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC200-1
MAIN BOOM DUTIES

Main Boom — 43,4 t counterweight — 360o


Radius 12,4 16,6 20,9 25,1 29,4 33,6 37,9 42,1 46,4 50,6 54,9 59,1 63,4 67,8
(m)
3 144,5 144,5 143,5 121,0

200 Tonne
3,5 132,5 132,5 132,0 121,0
4 122,0 122,0 121,5 121,0 94,8
4,5 113,0 113,0 112,5 112,0 94,8
5 105,0 105,0 104,5 104,0 94,8 73,7
6 91,9 92,0 91,6 90,9 91,5 73,6
7 81,5 81,7 81,2 81,7 81,1 70, 52,8
8 72,9 73,3 72,7 73,2 72,6 67,1 50,8 44,9
9 63,7 64,9 64,8 64,3 63,4 63,8 48,8 42,1 37,5
10 57,2 57,2 56,6 56,8 56,7 47,0 39,2 35,0 30,8
12 44,7 44,5 42,5 45,0 43,9 44,0 34,1 30,8 27,7 24,0
14 35,9 35,7 36,0 36,0 35,0 30,4 27,3 24,8 22,1 19,6 15,6
16 29,1 29,9 29,8 29,1 28,2 26,8 24,6 22,3 20,1 18,2 15,6 12,0
18 25,2 24,9 24,2 23,3 22,7 21,9 20,3 18,4 16,8 14,7 12,0

Crane
20 21,5 21,1 20,5 20,0 20,4 18,7 18,3 16,9 15,6 13,7 11,9
22 18,2 17,6 18,2 17,5 16,5 15,9 15,5 14,5 12,9 11,4
24 15,9 15,9 15,9 15,1 14,8 14,2 13,9 13,4 12,1 10,8
26 14,6 14,0 13,2 13,5 12,5 12,2 12,3 11,4 10,2
28 13,0 12,4 12,2 11,9 11,7 11,2 10,7 10,6 9,7
30 11,6 11,0 11,3 10,5 10,7 9,8 9,9 9,8 9,1
32 10,1 10,1 9,7 9,4 8,9 9,1 8,5 8,5
34 9,6 9,1 9,1 8,4 8,2 8,0 7,4 7,4
36 8,1 8,2 7,8 7,5 7,0 6,5 6,5
38 7,3 7,3 7,1 6,7 6,2 5,7 5,6
40 6,6 6,4 5,9 5,4 4,9 4,9
42 6,0 5,7 5,3 4,8 4,3 4,2
44 5,1 4,7 4,2 3,7 3,6
46 4,6 4,2 3,6 3,1 3,1
48 3,7 3,2 2,7 2,6
50 3,3 2,7 2,2 2,2
54 2,5 1,5 1,4

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC200-1
FLY JIB DUTIES

12,4 m Main Boom — 69 t counterweight 33,6 m Main Boom — 69 t counterweight


Radius Radius
(m) 9,0m 17,0m (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

200 Tonne
3 19,7 15,0 7 19,6
3,5 19,7 14,8 8 19,1 10,5
4 19,7 14,6 9 18,3 10,4
4,5 19,7 14,3 10 17,2 13,3 10,2
5 19,6 15,5 14,0 12 15,3 12,5 9,5 9,8
6 19,5 14,3 13,5 14 13,8 11,7 9,1 9,4 7,9
7 19,1 13,3 10,3 12,8 16 12,3 11,0 8,8 8,9 7,5
8 17,5 12,5 9,8 12,2 18 11,2 10,3 8,5 8,5 7,2
9 16,0 11,7 9,4 11,5 9,6 20 10,3 9,6 8,3 8,1 6,9 6,1
10 14,4 11,0 9,1 10,9 9,2 22 9,4 9,0 8,0 7,6 6,6 5,9
12 12,3 9,9 8,5 9,9 8,4 24 8,6 8,3 7,8 7,2 6,2 5,7
14 10,6 9,0 8,0 9,0 7,8 6,9 26 8,0 7,7 7,5 6,7 5,9 5,5
16 9,4 8,3 8,2 7,3 6,5 28 7,5 7,3 7,2 6,3 5,6 5,2
18 8,2 7,6 6,8 6,2 30 7,0 6,8 6,8 5,8 5,4 5,0
20 7,0 6,4 6,0 32 6,5 6,4 6,4 5,5 5,1 4,9
22 6,5 6,1 5,9 34 6,1 6,0 5,2 4,8 4,7
24 6,2 5,9 36 5,8 5,7 4,9 4,6 4,5

Crane
26 38 5,5 5,4 4,5 4,4 4,4
28 40 4,3 4,2 4,2
30 42 4,1 4,1
32 44 3,9 3,9
34 46 3,7 3,7
36 48

50,6 m Main Boom — 69 t counterweight 67,8 m Main Boom — 69 t counterweight


Radius Radius
(m) 9,0m 17,0m (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
12 15,2 18 7,9 5,2
14 14,0 8,1 20 7,9 5,2
16 13,0 11,4 7,9 22 7,9 7,9 5,2
18 12,1 10,8 8,7 7,7 24 7,8 7,8 7,8 5,2
20 11,3 10,2 8,6 7,5 6,6 26 7,8 7,7 7,8 5,2 5,1
22 10,5 9,7 8,4 7,2 6,4 28 7,7 7,5 7,6 5,2 5,1
24 9,7 9,2 8,2 7,0 6,2 5,6 30 7,3 7,3 7,3 5,1 5,0 4,8
26 8,9 8,7 8,1 6,8 6,0 5,5 32 7,0 7,0 7,0 5,1 4,9 4,8
28 8,3 8,3 7,9 6,6 5,8 5,4 34 6,6 6,6 6,7 5,0 4,9 4,7
30 7,8 7,8 7,7 6,4 5,7 5,3 36 6,3 6,3 6,3 4,9 4,8 4,6
32 7,3 7,3 7,3 6,1 5,5 5,1 38 6,0 6,0 6,0 4,8 4,7 4,6
34 6,8 6,8 6,8 5,8 5,3 5,0 40 5,6 5,6 5,7 4,7 4,5 4,5
36 6,3 6,4 6,4 5,5 5,2 4,8 42 5,3 5,3 5,4 4,6 4,4 4,4
38 5,9 5,9 6,0 5,2 5,0 4,7 44 5,0 5,0 5,1 4,4 4,3 4,3
40 5,6 5,6 5,6 4,9 4,8 4,6 46 4,6 4,7 4,8 4,2 4,2 4,2
42 5,2 5,2 5,3 4,6 4,6 4,5 48 4,3 4,4 4,5 3,9 4,0 4,1
44 4,9 4,9 5,0 4,4 4,4 4,3 50 4,0 4,1 4,1 3,7 3,8 3,9
46 4,6 4,6 4,7 4,2 4,2 4,2 54 3,5 3,0 3,6 3,2 3,4 3,5
48 4,3 4,3 3,9 4,0 4,0 58 3,0 3,0 3,1 2,8 2,9 3,0
50 4,1 4,1 3,7 3,8 3,8 62 2,5 2,5 2,5 2,4 2,5 2,6
54 3,7 3,7 3,3 3,3 3,4 66 2,0 2,1 2,0 2,1 2,2
58 2,9 3,0 70 1,4 1,5 1,6 1,7 1,8
62 2,6 2,6 74 1,1 1,3

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC200-1
FLY JIB DUTIES

12,4 m Main Boom — 69 t counterweight 33,6 m Main Boom — 69 t counterweight


Radius Radius
(m) 25,0m 33,0m (m) 25,0m 33,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

200 Tonne
5 12,3 10 8,5
6 12,0 12 8,2 6,2
7 11,4 9,3 14 7,8 5,8
8 10,9 8,8 16 7,4 5,5
9 10,3 8,3 18 7,0 6,2 5,2
10 9,8 7,9 20 6,5 5,8 4,9 4,5
12 8,8 7,8 7,1 22 6,1 5,5 5,1 4,6 4,3
14 7,8 7,0 6,4 5,9 24 5,6 5,2 4,8 4,4 4,0 3,8
16 7,2 6,5 6,0 5,7 5,4 26 5,3 4,8 4,6 4,1 3,8 3,6
18 6,5 5,9 5,5 5,1 4,9 4,7 28 4,9 4,5 4,3 3,8 3,6 3,4
20 5,8 5,5 5,2 4,7 4,5 4,3 30 4,6 4,2 4,1 3,6 3,4 3,3
22 5,4 5,1 4,9 4,3 4,1 4,0 32 4,3 4,0 3,8 3,4 3,2 3,1
24 5,0 4,7 4,6 3,9 3,8 3,7 34 4,0 3,8 3,7 3,2 3,0 2,9
26 4,7 4,5 4,3 3,6 3,5 3,5 36 3,7 3,6 3,5 2,9 2,8 2,7
28 4,3 4,2 4,2 3,3 3,3 3,2 38 3,6 3,4 3,3 2,7 2,7 2,6
30 4,1 4,0 4,0 3,1 3,0 3,0 40 3,4 3,2 3,2 2,5 2,5 2,5
32 3,9 3,8 2,8 2,8 2,8 42 3,2 3,1 3,0 2,3 2,3 2,3

Crane
34 2,6 2,6 2,7 44 3,0 2,9 2,9 2,2 2,2 2,2
36 2,5 2,5 2,5 46 2,8 2,8 2,8 2,1 2,0 2,0
38 2,4 2,4 48 2,7 2,6 2,0 1,9 1,9
40 2,2 2,2 50 2,6 2,5 1,8 1,8 1,8
42 54 2,4 2,4 1,6 1,6 1,6
44 58 1,5 1,5

50,6 m Main Boom — 69 t counterweight 67,0 m Main Boom — 69 t counterweight


Radius Radius
(m) 25,0m 33,0m (m) 25,0m 33,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
16 6,4 20 3,6
18 6,3 4,3 22 3,6 2,2
20 6,1 4,3 24 3,6 2,2
22 5,8 5,3 4,2 26 3,6 2,2
24 5,6 5,1 4,0 3,7 28 3,6 3,5 2,2 2,7*
26 5,4 4,9 4,6 3,8 3,6 30 3,6 3,5 2,2 2,7*
28 5,2 4,7 4,4 3,7 3,4 3,3 32 3,6 3,5 3,5 2,2 2,7*
30 5,0 4,5 4,3 3,5 3,3 3,1 34 3,6 3,5 3,5 2,2 2,7* 2,6*
32 4,7 4,3 4,1 3,4 3,2 3,0 36 3,5 3,5 3,5 2,2 2,6* 2,6*
34 4,5 4,2 3,9 3,3 3,0 2,9 38 3,5 3,5 3,4 2,2 2,6* 2,6*
36 4,3 4,0 3,8 3,1 2,9 2,8 40 3,5 3,4 3,3 2,2 2,5* 2,6*
38 4,2 3,8 3,6 3,0 2,8 2,7 42 3,4 3,3 3,3 2,1 2,5* 2,5*
40 4,0 3,6 3.5 2,8 2,7 2,6 44 3,4 3,2 3,2 2,1 2,4* 2,4*
42 3,8 3,5 3,3 2,7 2,6 2,5 46 3,4 3,2 3,1 2,1 2,3* 2,3*
44 3,6 3,4 3,2 2,6 2,5 2,4 48 3,3 3,1 3,0 2,1 2,2* 2,2*
46 3,4 3,2 3,1 2,5 2,4 2,3 50 3,1 3,0 2,9 2,1 2,2* 2,2*
48 3,3 3,1 3,0 2,4 2,3 2,2 54 2,8 2,7 2,8 2,0 2,0* 2,0*
50 3,1 3,0 2,9 2,2 2,2 2,1 58 2,4 2,5 2,5 1,8 1,9* 1,9*
* MaIn Boom 63,4m

54 2,7 2,7 2,7 2,0 2,0 2,0 62 2,1 2,2 2,2 1,6 1,8* 1,8*
58 2,4 2,4 2,4 1,8 1,8 1,8 66 1,8 1,9 2,0 1,4 1,6* 1,7*
62 2,1 2,1 2,1 1,6 1,6 1,6 70 1,4 1,6 1,6 1,2 1,4* 1,5*
66 1,9 1,9 1,4 1,4 1,4 74 1,1 1,2 1,3 1,2* 1,2*
70 1,6 1,6 1,2 1,2 78
74 1,0 1,0 82
78 86

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC200-1
FLY JIB DUTIES

12,4 m Main Boom — 43,4 t counterweight 33,6 m Main Boom — 43,4 t counterweight
Radius Radius
(m) 9,0m 17,0m (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°

200 Tonne
3 19,7 15,0 7 19,6
3,5 19,7 14,8 8 19,1 10,5
4 19,7 14,6 9 18,3 10,4
4,5 19,7 14,3 10 17,2 13,3 10,2
5 19,6 15,5 14,0 12 15,3 12,5 9,5 9,8
6 19,5 14,3 13,5 14 13,8 11,7 9,1 9,4 7,9
7 19,1 13,3 10,3 12,8 16 12,3 11,0 8,8 8,9 7,5
8 17,5 12,5 9,8 12,2 18 11,2 10,3 8,5 8,5 7,2
9 16,0 11,7 9,4 11,5 9,6 20 10,3 9,6 8,3 8,1 6,9 6,1
10 14,4 11,0 9,1 10,9 9,2 22 9,4 9,0 8,0 7,6 6,6 5,9
12 12,3 9,9 8,5 9,9 8,4 24 8,6 8,3 7,8 7,2 6,2 5,7
14 10,6 9,0 8,0 9,0 7,8 6,9 26 8,0 7,7 7,5 6,7 5,9 5,5
16 9,4 8,3 8,2 7,3 6,5 28 7,5 7,3 7,2 6,3 5,6 5,2
18 8,2 7,6 6,8 6,2 30 7,0 6,8 6,8 5,8 5,4 5,0
20 7,0 6,4 6,0 32 6,5 6,4 6,4 5,5 5,1 4,9
22 6,5 6,1 5,9 34 6,1 6,0 5,2 4,8 4,7
24 6,2 5,9 36 5,8 5,7 4,9 4,6 4,5

Crane
26 38 5,5 5,4 4,5 4,4 4,4
28 40 4,3 4,2 4,2
30 42 4,1 4,1
32 44 3,9 3,9
34 46 3,7 3,7
36 48

50,6 m Main Boom — 43,4 t counterweight 67,8 m Main Boom — 43,4 t counterweight
Radius Radius
(m) 9,0m 17,0m (m) 9,0m 17,0m
0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 20° 40°
12 15,2 18 7,9 5,2
14 14,0 8,1 20 7,9 5,2
16 13,0 11,4 7,9 22 7,9 7,9 5,2
18 12,1 10,8 8,7 7,7 24 7,8 7,8 7,8 5,2
20 11,3 10,2 8,6 7,5 6,6 26 7,8 7,7 7,8 5,2 5,1
22 10,5 9,7 8,4 7,2 6,4 28 7,7 7,5 7,6 5,2 5,1
24 9,7 9,2 8,2 7,0 6,2 5,6 30 7,3 7,3 7,3 5,1 5,0 4,8
26 8,9 8,7 8,1 6,8 6,0 5,5 32 7,0 7,0 7,0 5,1 4,9 4,8
28 8,3 8,3 7,9 6,6 5,8 5,4 34 6,6 6,6 6,7 5,0 4,9 4,7
30 7,8 7,8 7,7 6,4 5,7 5,3 36 6,3 6,3 6,3 4,9 4,8 4,6
32 7,3 7,3 7,3 6,1 5,5 5,1 38 5,4 6,0 6,0 4,8 4,7 4,6
34 6,8 6,8 6,8 5,8 5,3 5,0 40 4,7 5,2 5,5 4,7 4,5 4,5
36 6,3 6,4 6,4 5,5 5,2 4,8 42 4,0 4,5 4,8 4,2 4,4 4,4
38 5,9 5,9 6,0 5,2 5,0 4,7 44 3,4 3,8 4,1 3,6 4,3 4,3
40 5,6 5,6 5,6 4,9 4,8 4,6 46 2,9 3,3 3,5 3,1 3,8 4,2
42 5,2 5,2 5,3 4,6 4,6 4,5 48 2,4 2,7 3,0 2,6 3,3 3,8
44 4,9 4,9 5,0 4,4 4,4 4,3 50 1,9 2,3 2,4 2,2 2,8 3,3
46 4,5 4,6 4,7 4,2 4,2 4,2 54 1,2 1,4 1,6 1,4 1,9 2,3
48 4,0 4,2 3,9 4,0 4,0 58 1,2 1,5
50 3,5 3,7 3,7 3,8 3,8 62
54 2,8 2,8 3,3 3,3 3,4 66
58 2,3 2,6 70
62 1,8 1,9 74

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
DIMENSIONS

250 Tonne
Crane
* Duties with reduced outrigger base on request

Overall Vehicle Width 3m

HOOKBLOCK

Vehicle weight 78,0000kg Capacity 11,8te 35,2te 80,0te 132,9te 155,4te 195,9te
Weight 500kg 750kg 1050kg 1200kg 1700kg 2000kg

LOAD REDUCTIONS

Boom Length 14,5m 19,3m 24,1m 28,9m 33,7m 38,5m 43,3m 48,1m 52,9m 57,7m 62,5m 67,3m 72,1m 77,2m 80,0m
Reductions 1,9t 1,49t 1,1t 0,9t 0,8t 0,7t 0,6t 0,6t 0,5t 0,5t 0,4t 0,4t 0,4t 0,4t 0,3t

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
MAIN BOOM DUTIES

Outrigger Width 8,68mm x 8,50m — 360°


Radius Length of Main Boom — 96,6 t counterweight
(m) 14,5* 14,5 19,3 24,1 28,9 33,7 38,5 43,3 48,1 52,9 57,7 62,5 67,3 72,1 77,2 80,0
250,0**
3,0 197,0 155,0 147,5
3,5 181,5 155,0 147,5

250 Tonne
4,0 168,0 155,0 147,5 146,0
4,5 156,5 155,0 144,5 146,0
5,0 146,5 146,5 144,5 143,0 134,5
6,0 129,40 129,0 129,0 126,0 124,0 106,5
7,0 115,0 115,0 115,0 114,0 110,5 101,0 81,1
8,0 104,0 104,0 104,0 103,0 100,0 94,8 78,1 60,6
9,0 94,4 94,4 94,7 94.0 91,1 88,8 74,9 58,7 47,6
10,0 84,4 84,4 86,6 86,2 83,6 82,9 71,7 57,0 44,5
12,0 50,8 50,8 73,7 73,2 71,3 70,9 64,8 53,6 39,1 34,2 29,4
14,0 61,4 61,9 60,9 61,7 57,7 49,8 34,3 30,6 26,9 23,6
16,0 45,9 53,3 52,2 53,0 51,5 46,0 31,0 27,1 24,4 21,6 18,1 14,7
18,0 46,9 46,6 45,6 46,7 42,2 28,4 24,7 21,9 19,9 17,3 14,7 10,9 9,3
20,0 37,1 39,8 38,9 39,8 39,3 26,1 22,3 20,2 18,1 16,1 14,4 10,9 9,3
22,0 34,5 35,4 34,4 35,5 24,7 20,0 18,4 16,8 14,8 13,9 10,8 9,3
24,0 31,6 31,1 30,8 31,1 23,3 18,2 16,7 15,5 13,9 13,0 10,5 9,3

Crane
26,0 27,6 28,5 27,6 21,9 16,9 15,1 14,3 13,0 12,1 10,2 9,3
28,0 24,8 25,5 24,6 20,5 15,8 14,0 13,0 12,1 11,4 9,8 9,3
30,0 22,1 23,0 22,1 19,5 14,8 12,9 12,1 11,2 10,7 9,3 9,0
32,0 20,9 19,9 18,7 13,9 11,8 11,2 10,4 10,0 8,8 8,5
34,0 18,4 18,0 17,8 13,3 11,1 10,3 9,7 9,3 8,4 8,0
36,0 16,4 17,0 12,7 10,5 9,5 9,0 8,7 7,9 7,5
38,0 15,5 15,7 12,0 10,0 8,8 8,3 8,2 7,4 7,0
40,0 14.5 11,4 9,5 8,3 7,7 7,6 7,0 6,6
42,0 13,3 10,9 9,1 7,9 7,0 7,1 6,6 6,2
44,0 10,8 10,6 8,6 7,5 6,6 6,6 6,2 5,8
46,0 10,2 8,2 7,1 6,2 6,0 5,8 5,4
48,0 9,9 8,0 6,7 5,9 5,7 5,4 5,0
50,0 7,7 6,4 5,5 5,3 4,9 4,6
54,0 3,5 5,9 4,8 4,6 4,4 3,9
58,0 5,4 4,4 4,0 3,8 3,3
62,0 3,9 3,5 3,2 2,8
66,0 3,0 2,8 2,3
70,0 2,4 2,0
74,0 1,6

• While lifting on main boom with extension rigged, deduct from main boom load chart
the following; 750kg with extension 7.75m. 1650kg with extension 7.75m + 7m.
• With extension in the transported position, there is no reduction in load capacity.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
FLY JIB DUTIES

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


14,5m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°

250 Tonne
3 23,6
3,5 23,6
4 23,6
4,5 23,6
5 23,6 20,7 10,7
6 22,4 18,9 10,4
7 20,9 17,2 14,3 10,2
8 19,3 16,0 13,4 11,5 9,8 9,3
9 17,9 14,9 12,6 10,9 9,7 9,5 8,8
10 16,7 13,7 11,9 10,4 9,3 9,1 8,3
12 14,2 12,2 10,6 9,4 8,6 8,4 7,5 6,7
14 12,2 10,7 9,7 8,7 8,0 7,7 6,8 6,1 5,6
16 10,8 9,7 8,8 8,1 7,6 7,0 6,2 5,7 5,2
18 9,4 8,7 8,1 7,7 7,4 6,3 5,8 5,3 4,9 4,6
20 8,5 8,0 7,7 7,4 7,3 5,8 5,4 5,0 4,6 4,4
22 7,4 7,4 5,4 5,0 4,7 4,5 4,2
24 5,0 4,7 4,5 4,3 4,1
26 4,7 4,5 4,3 4,1 4,0
28 4,4 4,3 4,1 4,0 4,0
30 4,2 4,1 4,1 4,0

Crane
32
34
36
38
40

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


48,1m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
12 16,1 7,4
14 15,3 14,1 7,2
16 14,4 13,5 11,6 9,9 6,9 6,5
18 13,5 12,8 11,1 9,5 8,5 6,7 6,2
20 12,5 12,1 10,6 9,2 8,2 6,5 6,0 5,5
22 11,5 11,3 10,1 8,9 8,0 6,3 5,8 5,3 4,9
24 10,6 10,4 9,7 8,6 7,9 6,0 5,6 5,1 4,8
26 9,7 9,6 9,2 8,4 7,7 5,8 5,4 5,0 4,6 4,3
28 9,1 8,9 8,8 8,2 7,6 5,6 5,2 4,8 4,5 4,2
30 8,5 8,4 8,3 7,8 7,4 5,4 5,0 4,7 4,4 4,1
32 7,9 7,8 7,8 7,5 7,1 5,2 4,8 4,6 4,3 4,1
34 7,3 7,3 7,3 7,1 6,9 5,1 4,7 4,4 4,2 4,0
36 6,8 6,7 6,8 6,7 6,6 4,9 4,6 4,3 4,1 4,0
38 6,4 6,3 6,3 6,3 6,3 4,7 4,4 4,2 4,0 3,9
40 6,0 6,0 6,0 6,0 6,0 4,6 4,3 4,1 4,0 3,9
42 5,7 5,6 5,7 5,7 5,7 4,4 4,2 4,0 3,9 3,9
44 5,3 5,3 5,3 5,4 5,4 4,3 4,1 4,0 3,9 3,8
46 5,0 5,0 5,0 5,0 5,1 4,1 4,0 3,9 3,8 3,8
48 4,7 4,7 4,7 4,8 4,8 3,9 3,8 3,7 3,7 3,8
50 4,5 4,5 4,5 4,5 4,6 3,8 3,7 3,6 3,6 3,7
54 4,1 4,1 4,1 4,1 3,0 3,4 3,4 3,4 3,4 3,4
58 2,6 2,6 2,6 2,6 3,1 3,1 3,1 3,2 3,2
62 2,8 2,8 2,9 2,9 1,9
66 1,6 1,7 1,7 1,7
70

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
FLY JIB DUTIES

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


52,9m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°

250 Tonne
14 14,5 6,9
16 13,8 13,0 6,7
18 13,1 12,5 11,1 9,5 8,5 6,5 6,1
20 12,3 11,8 10,6 9,2 8,3 6,3 5,8
22 11,3 11,2 10,2 8,9 8,1 6,1 5,6 5,2
24 10,6 10,5 9,7 8,7 7,9 5,9 5,4 5,1 4,7
26 9,8 9,7 9,2 8,5 7,8 5,7 5,3 4,9 4,6 4,3
28 8,9 9,0 8,8 8,3 7,6 5,5 5,1 4,7 4,5 4,2
30 8,4 8,3 8,3 8,1 7,5 5,3 4,9 4,6 4,4 4,1
32 7,8 7,8 7,8 7,8 7,4 5,1 4,8 4,5 4,3 4,0
34 7,3 7,3 7,3 7,4 7,0 5,0 4,6 4,4 4,2 4,0
36 6,7 6,8 6,8 6,9 6,6 4,8 4,5 4,3 4,1 3,9
38 6,2 6,3 6,3 6,4 6,3 4,7 4,4 4,1 4,0 3,9
40 5,7 5,7 5,8 5,9 5,9 4,6 4,3 4,1 3,9 3,8
42 5,4 5,4 5,4 5,4 5,5 4,4 4,2 4,0 3,9 3,8
44 5,0 5,1 5,1 5,1 5,1 4,3 4,1 3,9 3,8 3,8
46 4,7 4,7 4,8 4,8 4,8 4,2 4,0 3,9 3,8 3,8
48 4,3 4,4 4,4 4,5 4,5 3,9 3,9 3,8 3,7 3,7
50 4,0 4,1 4,1 4,1 4,1 3,7 3,7 3,7 3,7 3,7
54 3,6 3,6 3,6 3,6 3,6 3,2 3,3 3,3 3,4 3,4

Crane
58 3,1 3,1 3,2 3,1 3,1 2,8 2,8 2,9 3,0 3,0
62 2,5 2,5 2,5 2,6 2,6
66 2,2 2,2 2,2 2,2 2,1
70
74

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


57,7m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
14 13,8
16 13,4 12,6 6,5
18 12,8 12,2 11,1 6,3
20 12,2 11,7 10,7 9,3 8,3 6,1 5,7
22 11,5 11,1 10,3 9,0 8,1 6,0 5,5
24 10,8 10,5 9,9 8,7 7,9 5,8 5,4 5,0
26 10,1 9,9 9,5 8,5 7,8 5,6 5,2 4,8 4,5
28 9,4 9,3 9,0 8,2 7,7 5,4 5,0 4,7 4,4 4,2
30 8,6 8,6 8,5 8,0 7,5 5,3 4,9 4,6 4,3 4,1
32 8,1 8,0 8,0 7,7 7,4 5,1 4,8 4,4 4,2 4,0
34 7,6 7,5 7,5 7,5 7,3 4,9 4,6 4,3 4,1 4,0
36 7,1 7,1 7,1 7,1 7,1 4,8 4,5 4,2 4,0 3,9
38 6,7 6,7 6,7 6,7 6,7 4,6 4,3 4,1 4,0 3,9
40 6,2 6,2 6,3 6,3 6,3 4,5 4,2 4,0 3,9 3,8
42 5,7 5,8 5,8 5,9 5,9 4,4 4,2 4,0 3,8 3,7
44 5,4 5,4 5,4 5,5 5,5 4,3 4,1 3,9 3,8 3,7
46 5,1 5,1 5,1 5,1 5,1 4,2 4,0 3,8 3,7 3,7
48 4,8 4,8 4,8 4,8 4,9 4,1 3,9 3,8 3,7 3,7
50 4,5 4,5 4,5 4,5 4,6 3,9 3,8 3,7 3,6 3,7
54 3,9 3,9 4,0 4,0 4,0 3,5 3,5 3,5 3,6 3,6
58 3,5 3,5 3,5 3,5 3,6 3,1 3,1 3,2 3,2 3,3
62 3,1 3,1 3,2 3,2 3,2 2,7 2,7 2,8 2,8 2,9
66 2,4 2,4 2,4 2,5 2,5
70 2,1 2,2 2,2 2,2 2,2
74

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
FLY JIB DUTIES

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


62,5m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°

250 Tonne
16 12,5
18 12,2 11,6 6,1
20 11,8 11,3 10,6 5,9
22 11,2 10,9 10,2 9,0 8,1 5,8 5,4
24 10,6 10,4 9,9 8,7 7,9 5,6 5,2 4,9
26 10,0 9,8 9,5 8,5 7,8 5,4 5,1 4,7
28 9,3 9,2 9,1 8,3 7,7 5,3 4,9 4,6 4,3
30 8,6 8,6 8,6 8,0 7,5 5,1 4,8 4,5 4,2 4,1
32 7,9 8,0 8,0 7,6 7,2 5,0 4,6 4,4 4,1 4,0
34 7,2 7,3 7,4 7,2 7,0 4,8 4,5 4,3 4,0 3,9
36 6,8 6,8 6,9 6,8 6,8 4,7 4,4 4,2 4,0 3,8
38 6,3 6,4 6,4 6,5 6,5 4,5 4,3 4,1 3,9 3,8
40 5,9 6,0 6,0 6,1 6,1 4,4 4,2 4,0 3,8 3,7
42 5,4 5,5 5,6 5,6 5,7 4,2 4,0 3,9 3,8 3,7
44 5,0 5,1 5,2 5,2 5,3 4,0 3,9 3,8 3,7 3,6
46 4,5 4,7 4,8 4,8 4,9 3,9 3,8 3,7 3,6 3,6
48 4,3 4,3 4,3 4,4 4,5 3,7 3,6 3,5 3,5 3,5
50 4,0 4,0 4,1 4,1 4,2 3,5 3,5 3,4 3,4 3,4
54 3,4 3,4 3,5 3,5 3,5 3,2 3,2 3,1 3,2 3,2
58 2,8 2,9 2,9 2,9 2,9 2,7 2,8 2,9 2,9 3,0

Crane
62 2,4 2,4 2,5 2,5 2,5 2,3 2,4 2,4 2,5 2,5
66 2,0 2,1 2,1 2,0 2,0 1,8 1,9 2,0 2,1 2,1
70 1,5 1,6 1,6 1,6 1,6
74 1,3 1,3 1,3 1,3 1,2
78 1,0 1,0

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


67,3m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
18 10,3 5,8
20 10,3 10,2 5,7
22 10,2 10,2 10,1 9,0 5,5 5,2
24 10,0 9,9 9,9 8,7 7,9 5,4 5,0
26 9,8 9,6 9,5 8,5 7,8 5,2 4,9 4,6
28 9,3 9,2 9,1 8,4 7,7 5,1 4,8 4,5 4,2
30 8,7 8,7 8,7 8,2 7,6 4,9 4,6 4,4 4,1
32 8,1 8,1 8,2 7,8 7,4 4,8 4,5 4,3 4,0 3,9
34 7,5 7,6 7,6 7,4 7,1 4,7 4,4 4,2 4,0 3,8
36 6,9 7,1 7,1 7,0 6,8 4,6 4,3 4,1 3,9 3,8
38 6,5 6,5 6,6 6,6 6,5 4,4 4,2 4,0 3,8 3,7
40 6,1 6,1 6,2 6,2 6,2 4,3 4,1 3,9 3,7 3,7
42 5,7 5,8 5,8 5,8 5,9 4,2 4,0 3,8 3,7 3,6
44 5,4 5,4 5,4 5,5 5,5 4,0 3,9 3,7 3,6 3,6
46 5,0 5,0 5,1 5,1 5,2 3,9 3,8 3,7 3,6 3,5
48 4,6 4,7 4,7 4,8 4,8 3,7 3,6 3,6 3,5 3,5
50 4,2 4,3 4,4 4,4 4,5 3,5 3,5 3,4 3,4 3,4
54 3,7 3,8 3,8 3,8 3,8 3,2 3,2 3,2 3,2 3,2
58 3,2 3,3 3,3 3,3 3,3 2,9 2,9 2,9 2,9 3,0
62 2,7 2,8 2,8 2,8 2,8 2,5 2,6 2,6 2,7 2,7
66 2,4 2,4 2,4 2,4 2,4 2,1 2,2 2,3 2,3 2,4
70 2,0 2,0 2,0 2,1 2,0 1,8 1,8 1,9 1,9 2,0
74 1,5 1,5 1,5 1,6 1,6
78 1,2 1,3 1,3 1,3 1,2
82 1,0 1,0 1,0

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
FLY JIB DUTIES

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


72,1m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°

250 Tonne
18 8,7
20 8,7 5,0
22 8,7 8,6 5,0
24 8,7 8,6 8,6 5,0 4,8
26 8,7 8,5 8,6 8,5 7,8 4,9 4,7
28 8,7 8,4 8,5 8,3 7,7 4,8 4,6 4,3
30 8,5 8,3 8,2 8,1 7,6 4,7 4,5 4,2 4,0
32 8,0 8,0 8,0 7,8 7,5 4,6 4,4 4,1 3,9
34 7,5 7,5 7,6 7,6 7,4 4,5 4,2 4,0 3,9 3,7
36 7,1 7,1 7,1 7,2 7,0 4,4 4,1 3,9 3,8 3,7
38 6,6 6,7 6,7 6,8 6,7 4,3 4,1 3,9 3,7 3,6
40 6,1 6,2 6,3 6,3 6,3 4,2 4,0 3,8 3,6 3,6
42 5,7 5,8 5,8 5,9 5,9 4,1 3,9 3,7 3,6 3,5
44 5,4 5,4 5,5 5,5 5,6 4,0 3,8 3,7 3,5 3,5
46 5,0 5,1 5,1 5,2 5,2 3,9 3,7 3,6 3,5 3,4
48 4,7 4,7 4,8 4,8 4,9 3,7 3,6 3,5 3,4 3,4
50 4,3 4,4 4,4 4,5 4,6 3,5 3,5 3,5 3,4 3,4
54 3,6 3,7 3,8 3,8 3,9 3,1 3,2 3,2 3,2 3,3
58 3,1 3,1 3,2 3,2 3,3 2,8 2,8 2,9 2,9 3,0
62 2,6 2,6 2,7 2,7 2,8 2,4 2,5 2,6 2,6 2,7

Crane
66 2,1 2,1 2,2 2,2 2,2 2,0 2,1 2,2 2,3 2,4
70 1,7 1,7 1,7 1,7 1,8 1,6 1,7 1,8 1,9 1,9
74 1,4 1,4 1,4 1,3 1,3 1,3 1,3 1,4 1,5 1,5
78 1,0 1,0 1,1 1,1
82

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


78,5m
Radius 10,4m 20,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
20 6,0
22 6,0 3,5
24 6,0 6,0 3,5
26 6,0 6,0 6,0 3,5 3,4
28 6,0 6,0 6,0 6,0 6,0 3,5 3,4
30 6,0 6,0 6,0 6,0 6,0 3,5 3,4 3,4
32 6,0 6,0 6,0 6,0 6,0 3,5 3,4 3,4
34 5,8 6,0 6,0 6,0 6,0 3,5 3,4 3,4 3,4
36 5,6 5,8 5,9 6,0 6,0 3,5 3,4 3,4 3,4 3,4
38 5,3 5,4 5,6 5,8 5,8 3,5 3,4 3,4 3,4 3,4
40 5,0 5,1 5,3 5,5 5,5 3,4 3,4 3,4 3,4 3,4
42 4,8 4,8 5,0 5,1 5,1 3,4 3,3 3,4 3,4 3,3
44 4,5 4,5 4,7 4,8 4,8 3,3 3,3 3,3 3,3 3,3
46 4,2 4,2 4,3 4,5 4,5 3,3 3,2 3,3 3,2 3,2
48 3,9 4,0 4,0 4,1 4,1 3,2 3,1 3,2 3,1 3,2
50 3,7 3,7 3,8 3,9 3,9 3,2 3,1 3,1 3,1 3,1
54 3,1 3,2 3,2 3,3 3,3 2,8 2,9 2,9 2,9 2,9
58 2,6 2,7 2,7 2,8 2,8 2,4 2,5 2,6 2,7 2,7
62 2,1 2,2 2,2 2,3 2,3 2,0 2,1 2,2 2,3 2,3
66 1,7 1,8 1,8 1,9 1,9 1,6 1,7 1,8 1,9 1,9
70 1,3 1,4 1,4 1,4 1,4 1,2 1,3 1,4 1,5 1,5
74 1,0 1,0 1,1 1,1 1,2
78
82
86

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
FLY JIB DUTIES

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


14,5m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°

250 Tonne
6 9,2
7 9,0
8 8,8 7,5
9 8,6 7,2
10 8,4 8,1 6,9
12 7,8 7,5 6,3 6,2
14 7,2 6,8 6,4 5,7 5,6
16 6,5 6,3 5,9 5,4 5,2 5,1 4,9
18 6,0 5,7 5,4 5,1 4,7 4,7 4,6 4,5 4,4
20 5,5 5,2 5,0 4,8 4,5 4,3 4,2 4,1 4,0 3,9
22 5,1 4,9 4,6 4,5 4,3 3,9 3,8 3,8 3,7 3,6
24 4,6 4,5 4,3 4,2 4,1 3,6 3,5 3,4 3,4 3,3
26 4,3 4,1 4,1 4,0 3,9 3,3 3,2 3,2 3,1 3,1
28 4,0 3,9 3,8 3,7 3,7 3,0 3,0 2,9 2,9 2,9
30 3,7 3,7 3,6 3,5 3,5 2,8 2,7 2,7 2,7 2,7
32 3,5 3,4 3,4 3,3 3,3 2,6 2,5 2,5 2,5 2,5
34 3,3 3,2 3,2 3,2 3,2 2,4 2,3 2,3 2,3 2,3
36 3,1 3,1 3,1 3,1 3,1 2,2 2,2 2,1 2,2 2,2
38 2,9 3,0 3,0 3,1 2,0 2,0 2,0 2,0 2,0
40 1,9 1,9 1,9 1,9 1,9

Crane
42 1,8 1,8 1,8 1,8 1,8
44 1,7 1,7 1,7 1,7 1,8
46 1,6 1,6 1,6 1,7
48
50

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


48,1m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
16 5,9
18 5,8 4,2
20 5,6 5,3 4,1
22 5,3 5,1 4,7 3,9 3,7
24 5,1 4,8 4,5 3,7 3,5
26 4,9 4,6 4,4 4,1 3,5 3,4 3,2
28 4,7 4,4 4,2 4,0 3,8 3,3 3,2 3,0 2,9
30 4,5 4,3 4,0 3,8 3,7 3,2 3,0 2,9 2,8 2,7
32 4,3 4,1 3,9 3,7 3,6 3,0 2,9 2,7 2,7 2,6
34 4,1 3,9 3,7 3,6 3,5 2,8 2,7 2,6 2,5 2,5
36 4,0 3,8 3,6 3,5 3,4 2,7 2,6 2,5 2,4 2,4
38 3,8 3,6 3,5 3,4 3,3 2,5 2,5 2,4 2,3 2,3
40 3,7 3,5 3,3 3,2 3,2 2,4 2,3 2,3 2,2 2,2
42 3,6 3,4 3,2 3,1 3,1 2,3 2,2 2,2 2,1 2,1
44 3,4 3,3 3,2 3,1 3,0 2,2 2,1 2,0 2,0 2,0
46 3,3 3,2 3,1 3,0 3,0 2,1 2,0 2,0 1,9 1,9
48 3,2 3,1 3,0 2,9 2,9 2,0 1,9 1,9 1,9 1,9
50 3,0 2,9 2,9 2,9 2,9 1,9 1,9 1,8 1,8 1,8
54 2,7 2,7 2,7 2,7 2,7 1,7 1,7 1,7 1,7 1,7
58 2,4 2,4 2,4 2,5 2,5 1,6 1,6 1,5 1,5 1,6
62 2,2 2,1 2,2 2,2 2,3 1,5 1,5 1,4 1,4 1,5
66 1,9 1,9 2,0 2,0 2,0 1,3 1,3 1,3 1,3 1,4
70 1,7 1,7 1,7 1,8 1,2 1,2 1,2 1,3 1,3
74 1,0 1,1 1,1 1,1 1,1
78

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
FLY JIB DUTIES

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


52,9m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°

250 Tonne
16 5,5
18 5,5
20 5,4 3,8
22 5,2 4,9 3,7
24 5,0 4,7 4,4 3,5 3,4
26 4,8 4,5 4,3 3,4 3,2 3,1
28 4,6 4,4 4,1 3,9 3,2 3,1 3,0
30 4,4 4,2 4,0 3,8 3,6 3,1 2,9 2,8 2,7
32 4,3 4,0 3,8 3,7 3,5 2,9 2,8 2,7 2,6 2,5
34 4,1 3,9 3,7 3,5 3,4 2,8 2,7 2,6 2,5 2,4
36 3,9 3,8 3,6 3,4 3,3 2,7 2,6 2,4 2,4 2,3
38 3,8 3,6 3,5 3,3 3,2 2,5 2,4 2,3 2,3 2,2
40 3,7 3,5 3,3 3,2 3,2 2,4 2,3 2,2 2,2 2,2
42 3,5 3,4 3,2 3,1 3,1 2,3 2,2 2,1 2,1 2,1
44 3,4 3,3 3,1 3,0 3,0 2,2 2,1 2,0 2,0 2,0
46 3,3 3,2 3,0 3,0 2,9 2,1 2,0 1,9 1,9 1,9
48 3,2 3,1 3,0 2,9 2,9 2,0 1,9 1,9 1,8 1,8
50 3,0 3,0 2,9 2,8 2,8 1,9 1,8 1,8 1,8 1,8
54 2,7 2,8 2,7 2,7 2,7 1,7 1,7 1,7 1,6 1,7
58 2,4 2,4 2,5 2,5 2,6 1,6 1,5 1,5 1,5 1,6

Crane
62 2,0 2,1 2,1 2,2 2,2 1,4 1,4 1,4 1,4 1,5
66 1,6 1,7 1,8 1,8 1,8 1,2 1,2 1,2 1,2 1,3
70 1,4 1,4 1,5 1,5 1,5 1,0 1,0 1,1 1,1
74 1,2 1,2 1,2 1,2
78

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


57,7m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
18 5,2
20 5,2 3,5
22 5,1 4,8 3,5
24 4,9 4,6 3,4 3,3
26 4,7 4,5 4,2 3,3 3,2
28 4,5 4,3 4,1 3,9 3,1 3,0 2,9
30 4,4 4,1 3,9 3,7 3,6 3,0 2,9 2,8
32 4,2 4,0 3,8 3,6 3,5 2,9 2,8 2,6 2,6
34 4,1 3,9 3,6 3,5 3,4 2,7 2,6 2,5 2,4 2,4
36 3,9 3,7 3,5 3,4 3,3 2,6 2,5 2,4 2,3 2,3
38 3,8 3,6 3,4 3,3 3,2 2,5 2,4 2,3 2,3 2,2
40 3,6 3,5 3,3 3,2 3,1 2,4 2,3 2,2 2,2 2,1
42 3,5 3,3 3,2 3,1 3,1 2,3 2,2 2,1 2,1 2,0
44 3,4 3,2 3,1 3,0 3,0 2,2 2,1 2,0 2,0 2,0
46 3,3 3,1 3,0 2,9 2,9 2,1 2,0 1,9 1,9 1,9
48 3,2 3,0 2,9 2,9 2,9 2,0 1,9 1,9 1,8 1,8
50 3,1 3,0 2,9 2,8 2,8 1,9 1,8 1,8 1,8 1,8
54 2,8 2,8 2,7 2,7 2,7 1,8 1,7 1,7 1,6 1,6
58 2,5 2,6 2,6 2,5 2,6 1,6 1,6 1,5 1,5 1,5
62 2,2 2,3 2,3 2,4 2,4 1,4 1,4 1,4 1,4 1,5
66 1,9 1,9 2,0 2,0 2,1 1,3 1,3 1,3 1,3 1,4
70 1,6 1,6 1,7 1,7 1,7 1,1 1,1 1,1 1,2 1,2
74 1,4 1,4 1,4 1,4 1,4 1,0
78 1,1 1,2 1,2 1,2 1,2
82

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
FLY JIB DUTIES

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


62,5m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°

250 Tonne
20 4,7
22 4,7 3,1
24 4,6 4,5 3,1
26 4,5 4,3 3,1 3,0
28 4,4 4,2 4,0 3,0 2,9
30 4,2 4,0 3,8 3,7 2,9 2,8 2,7
32 4,1 3,9 3,7 3,6 3,4 2,8 2,7 2,6 2,5
34 4,0 3,8 3,6 3,5 3,3 2,6 2,6 2,5 2,4 2,3
36 3,8 3,6 3,5 3,3 3,3 2,5 2,4 2,4 2,3 2,2
38 3,7 3,5 3,4 3,2 3,2 2,4 2,3 2,2 2,2 2,2
40 3,6 3,4 3,3 3,1 3,1 2,3 2,2 2,1 2,1 2,1
42 3,5 3,3 3,2 3,1 3,0 2,2 2,2 2,1 2,0 2,0
44 3,3 3,2 3,1 3,0 3,0 2,1 2,1 2,0 1,9 1,9
46 3,2 3,1 3,0 2,9 2,9 2,0 2,0 1,9 1,9 1,9
48 3,0 3,0 2,9 2,9 2,8 1,9 1,9 1,8 1,8 1,8
50 2,8 2,8 2,8 2,8 2,8 1,8 1,8 1,8 1,7 1,7
54 2,5 2,5 2,5 2,5 2,6 1,7 1,6 1,6 1,6 1,6
58 2,2 2,3 2,3 1,3 2,3 1,5 1,5 1,5 1,5 1,5
62 1,9 2,0 2,0 2,0 2,1 1,4 1,4 1,4 1,4 1,4
66 1,5 1,6 1,7 1,7 1,8 1,2 1,2 1,2 1,2 1,3

Crane
70 1,2 1,3 1,3 1,4 1,4 1,0 1,1 1,1 1,2
74 1,0 1,0
78

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


67,3m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
22 4,1
24 4,1 2,7
26 4,1 4,0 2,7
28 4,0 4,0 2,6 2,6
30 4,0 3,9 3,7 2,6 2,6
32 3,9 3,8 3,6 3,5 2,5 2,6 2,4
34 3,8 3,7 3,5 3,4 3,3 2,5 2,5 2,4 2,3
36 3,7 3,5 3,4 3,3 3,2 2,4 2,4 2,3 2,2 2,2
38 3,6 3,4 3,3 3,2 3,1 2,4 2,3 2,2 2,1 2,1
40 3,5 3,3 3,2 3,1 3,0 2,3 2,2 2,1 2,0 2,0
42 3,4 3,2 3,1 3,0 3,0 2,2 2,1 2,0 2,0 1,9
44 3,3 3,2 3,0 2,9 2,9 2,1 2,0 1,9 1,9 1,9
46 3,2 3,1 3,0 2,9 2,8 2,0 1,9 1,9 1,8 1,8
48 3,0 3,0 2,9 2,8 2,8 1,9 1,8 1,8 1,8 1,7
50 2,9 2,9 2,8 2,8 2,7 1,8 1,8 1,7 1,7 1,7
54 2,6 2,6 2,6 2,6 2,6 1,6 1,6 1,6 1,6 1,6
58 2,3 2,3 2,3 2,4 2,4 1,5 1,5 1,5 1,4 1,5
62 2,0 2,0 2,1 2,1 2,2 1,3 1,3 1,3 1,3 1,4
66 1,7 1,8 1,8 1,9 1,9 1,2 1,2 1,2 1,2 1,2
70 1,4 1,5 1,5 1,6 1,6 1,0 1,1 1,1 1,1 1,1
74 1,1 1,2 1,2 1,3 1,3 1,0
78
82

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TEREX/DEMAG AC250-1
FLY JIB DUTIES

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


72,1m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°

250 Tonne
22 3,5
24 3,5
26 3,5 2,1
28 3,5 3,4 2,1
30 3,5 3,4 2,1 2,1
32 3,5 3,4 3,3 2,1 2,1
34 3,5 3,3 3,3 3,2 2,1 2,1 2,0
36 3,5 3,3 3,2 3,2 3,1 2,1 2,0 2,0 1,9
38 3,4 3,3 3,2 3,1 3,0 2,1 2,0 2,0 1,9 1,9
40 3,3 3,2 3,1 3,0 3,0 2,1 2,0 2,0 1,9 1,9
42 3,2 3,1 3,0 2,9 2,9 2,0 2,0 1,9 1,8 1,9
44 3,1 3,1 2,9 2,9 2,8 2,0 1,9 1,8 1,8 1,8
46 3,1 3,0 2,9 2,8 2,8 1,9 1,8 1,8 1,7 1,7
48 3,0 2,9 2,8 2,7 2,7 1,8 1,8 1,7 1,7 1,7
50 2,9 2,8 2,7 2,7 2,7 1,7 1,7 1,7 1,6 1,6
54 2,6 2,6 2,6 2,6 2,6 1,6 1,6 1,5 1,5 1,5
58 2,3 2,3 2,4 2,4 2,5 1,4 1,4 1,4 1,4 1,4
62 1,9 2,0 2,1 2,1 2,2 1,3 1,3 1,3 1,3 1,3
66 1,6 1,7 1,8 1,8 1,9 1,1 1,1 1,1 1,1 1,2
70 1,3 1,4 1,5 1,5 1,6 1,0

Crane
74 1,1 1,1 1,2 1,2

Lifting Capacities Extension 8,68m x 8,50m — 96,6 t counterweight


77,2m
Radius 28,0m 36,0m
(m) 0º 10º 20º 30° 40° 0º 10º 20º 30° 40°
24 2,4
26 2,4 1,2
28 2,4 2,3 1,2
30 2,4 2,3 1,2
32 2,4 2,3 2,3 1,2
34 2,4 2,3 2,3 1,2
36 2,4 2,3 2,3 2,3 1,2
38 2,4 2,3 2,3 2,3 2,3 1,2
40 2,4 2,3 2,3 2,3 2,3 1,2
42 2,4 2,3 2,3 2,3 2,3 1,2
44 2,4 2,3 2,3 2,3 2,3 1,2
46 2,4 2,3 2,3 2,3 2,3 1,2
48 2,3 2,3 2,3 2,3 2,3 1,2
50 2,3 2,3 2,2 2,3 2,3 1,2
54 2,3 2,2 2,2 2,2 2,2 1,2
58 2,0 2,2 2,1 2,1 2,1 1,2
62 1,7 1,8 1,9 2,0 2,0 1,2
66 1,4 1,5 1,6 1,7 1,7
70 1,0 1,2 1,2 1,3 1,4
74 1,0
78

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
DIMENSIONS

350 Tonne
Crane
HOOKBLOCK
Capacity (t) 205,8 165,6 123,9 80,4 35,2 11,8
Weight (t) 2,5 1,7 1,2 1,05 0,7 0,5

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
MAIN BOOM WITH SUPERLIFT

36,2 - 64m 8,7x8,5m 360° 116,7t

116,7t Counterweight
Boom Length (m) 36,2 40,7 45,2 49,7 54,2 58,7 64

350 Tonne
Radius (m)
6 106 83,3
7 103,5 80,9 68,3
8 100,5 78,6 66,6 54,9 46,2
9 91,6 76,5 64,8 53,7 45,3 35,6
10 83,7 74,4 63,3 52,6 44,4 34,8 27,3
12 71,3 69,8 60,2 50,4 42,5 33,4 26,1
14 61,9 60,5 57,7 48,3 40,7 32,1 25,1
16 54,4 53,1 52,5 46,6 39,1 30,8 24,1
18 48,1 47,2 46,6 44,8 37,7 29,7 23,1
20 42,4 41,9 41,7 41,5 36,3 28,7 22,3
22 37,7 37,2 37,3 37,4 34,9 27,6 21,5
24 33,7 33,2 33,3 33,7 33,3 26,6 20,7
26 30 29,5 29,7 30,1 30,7 25,8 19,9
28 26,9 26,4 26,5 26,9 27,6 25 19,3
30 23,6 23,7 23,8 24,2 24,9 24,3 18,7
32 19,1 21,4 21,5 21,9 22,5 23,1 18,1

Crane
34 19 19,4 19,7 20,3 20,9 17,6
36 15,4 17,4 17,8 18,4 19 17
38 15,7 16 16,7 17,3 16,4
42 9 13,1 13,7 14,3 14,5
46 8 11,3 11,9 12,1
50 7,3 9,9 10,1
54 6,7 8,4
58 6,3
60 4,3

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
MAIN BOOM WITH SUPERLIFT

36,2 - 64m 360° 95.9t

95,9t Counterweight
Boom Length (m) 36,2 40,7 45,2 49,7 54,2 58,7 64

350 Tonne
Radius (m)
6 106 83,3
7 103,5 80,9 68,3
8 100,5 78,6 66,6 54,9 46,2
9 91,6 76,5 64,8 53,7 45,3 35,6
10 83,7 74,4 63,3 52,6 44,4 38,4 27,3
12 71,2 69,8 60,2 50,4 42,5 33,4 26,1
14 60,5 60 57,7 48,3 40,7 32,1 25,1
16 51,8 51,4 51,5 46,6 39,1 30,8 24,1
18 44,8 44,4 44,6 44,8 37,7 29,7 23,1
20 38,4 37,9 38 38,4 36,3 28,7 22,3
22 33 32,5 32,6 33 33,6 27,6 21,5
24 28,7 28,2 28,3 28,7 29,3 26,6 20,7
26 25,2 24,6 24,7 25,1 25,7 25,8 19,9
28 22,3 21,7 21,8 22,1 22,7 23,4 19,3
30 19,8 19,2 19,3 19,6 20,2 20,8 18,7
32 17,7 17 17 17,4 18 18,7 18,1

Crane
34 15 15 15,4 16,1 16,8 17
36 13,3 13,3 13,7 14,3 15 15,2
38 11,8 12,2 12,8 13,5 13,7
42 9 9,6 10,2 10,9 11,1
46 7,6 8,1 8,8 8,9
50 6,4 7,1 7,2
54 5,6 5,7
58 4,5
60 4

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
MAIN BOOM WITHOUT SUPERLIFT

13,7 - 64m 360° 116,7t

116,7t Counterweight
Boom Length (m) 13,7 18,2 22,7 27,2 31,7 36,2 40,7 43,9 48,4 53,9 58,4 64

350 Tonne
Radius (m) *
300
3 200 200 198
3.5 195,5 182 182,5 182
4 184 168,5 169 168,5 161
4.5 173,5 156,5 157 157 155,5
5 162 146,5 147 146,5 146 132,5
6 142,5 129 129,5 129,5 128,5 125,5 100
7 127 115 116 115,5 116 115 94,5 86,7
8 113,5 103,5 104,5 104 105 103,5 89,1 80,7
9 101,5 94,3 95,1 94,7 95,5 94,1 84,2 74,6 66,7
10 89,7 86,2 87 86,7 87,5 86,1 79,3 69,6 62,6 53,3
12 74 73,7 74,5 73,6 71,9 60 55,2 48 41,7 36,4
14 63,6 63,7 64,6 63,8 63,9 53,7 48,6 43,8 38,1 33,9 28
16 45,4 55,9 56,7 56,1 56,5 47,3 44 39,8 35,1 31,5 26,2
18 48 49,8 50,5 49,8 42,2 39,4 36,5 32,3 29,2 24,5
20 37,1 44,1 44,9 44,1 38,6 35,2 33,1 30,2 27,2 23,1

Crane
22 38,3 40,2 39,4 34,9 32,5 29,8 28 25,5 21,6
24 31,7 36,3 35,4 31,5 29,8 27,7 25,9 23,9 20,5
26 32 31,8 29,8 27 25,7 24,2 22,3 19,4
28 26,2 28,6 28,2 24,6 23,7 22,6 20,8 18,3
30 11,8 25,8 26,6 22,9 21,6 21 19,7 17,1
32 23 24,2 21,2 20,1 19,4 18,6 16,3
34 11,8 22,1 19,8 18,7 17,8 17,4 15,5
36 19 18,5 17,4 16,8 16,3 14,7
38 17,7 16,1 15,7 15,3 13,9
40 15,9 15 14,7 14,4 13,1
42 12,9 14,3 13,6 13,6 12,3
44 13,6 12,7 12,7 11,7
46 11,6 12,1 11,9 11,1
48 11,5 11,2 10,5
50 10 10,6 9,9
52 10 9,2
54 8,8 8,8
56 8,3
58 7,8
60 5,8
* Special equipment required

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON FOLDING JIB

36,2 - 64m 11,4m 360° 116,7t

0°-
40°

116,7t Counterweight
Main Boom (m) 36,2 54,2 64

350 Tonne
Folding Jib (m) 11,4 11,4 11,4
Offset 0° 20° 40° 0° 20° 40° 0° 20° 40°
Radius (m)
8 22,9
9 22,9
10 22,9 22,9
12 22,9 22,9 22,9 15,4
14 22,9 22,7 17,5 22,7 21,4 14,8
16 22,9 22,3 16,7 22,2 20,6 14,2 14,4
18 22,9 21,2 16 21,7 19,9 15,8 13,7 13,9
20 22,7 20 15,4 21,1 19,3 15,3 13,1 13,3 13,7
22 22,3 18,9 14,9 20,4 18,7 14,9 12,6 12,8 13,3
24 22 18,2 14,4 19,8 18,2 14,5 12,2 12,4 12,8
26 21,6 17,4 14 19,2 17,7 14,2 11,8 11,9 12,4
28 21,1 16,7 13,7 18,6 17,2 13,9 11,3 11,5 11,9
30 20 15,9 13,4 18,1 16,7 13,5 10,9 11,1 11,6
32 19 15,5 13,1 17,6 16,3 13,2 10,5 10,7 11,2

Crane
34 18 15 13 17,1 15,9 13 10,2 10,3 10,8
36 16,9 14,6 12,9 16,6 15,5 12,8 9,9 10 10,4
38 16,2 14,1 12,8 16 15,1 12,7 9,6 9,7 10,1
40 15,1 14 14,4 14,8 12,5 9,3 9,4 9,8
44 9,5 10,8 11,7 12,4 12,1 8,6 8,9 9,2
48 9,5 10,1 10,4 8,2 8,3 8,7
52 7,6 8,1 8,3 7,8 7,9 8,2
56 6,1 6,4 6,3 6,8 7
60 3,9 4,6 5 5,4 5,5
64 3,8 4,1
68 2,6 3

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON FOLDING JIB

36,2 - 64m 20m 360° 116,7t

0°-
40°

116,7t Counterweight
Main Boom (m) 36,2 54,2 64

350 Tonne
Folding Jib (m) 20 20 20
Offset 0° 20° 40° 0° 20° 40° 0° 20° 40°
Radius (m)
8 18,5
9 17,8
10 17,1
12 15,8 13,6
14 14,4 13,1 10
16 13,4 8,8 12,6 9,9
18 12,4 8,3 12,2 9,7
20 11,5 7,9 6,3 11,7 8,3 9,5
22 10,5 7,6 6,1 11,3 8 9,2 8
24 10 7,3 6 10,9 7,8 6,1 8,9 7,7
26 9,4 7 5,8 10,5 7,5 5,9 8,7 7,5
28 8,9 6,7 5,7 10,1 7,3 5,8 8,5 7,3 5,8
30 8,4 6,6 5,6 9,7 71 5,7 8,3 7,1 5,7
32 7,9 6,4 5,5 9,4 6,9 5,7 8,1 6,9 5,6

Crane
34 7,5 6,2 5,5 9 6,7 5,6 7,9 6,7 5,6
36 7,2 6 5,4 8,7 6,5 5,5 7,6 6,6 5,5
38 6,9 5,8 5,3 8,3 6,3 5,4 7,5 6,4 5,4
40 6,6 5,7 5,3 8 6,2 5,4 7,3 6,3 5,4
44 6,1 5,5 5,3 7,3 6 5,3 6,9 6,1 5,3
48 5,8 5,4 6,9 5,7 5,3 6,5 5,9 5,3
52 5,4 5,4 6,5 5,6 5,2 6,1 5,7 5,2
56 6,1 5,4 5,2 5,9 5,5 5,2
60 5,8 5,3 5,2 5,6 5,4 5,2
64 5 5,3 5 5,3 5,2
68 3,2 4,2 4 4,5 4,8
72 3,1 3,6
76 2,1 2,5

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON STRONG FIXED JIB WITH SUPERLIFT

58,7m 360° 116t

116,7t Counterweight
Main Boom (m) 58,7

350 Tonne
Fixed Jib (m) 15 21 27 33 39 45 51
Radius (m)
12 18,1 14,5
14 17,8 14,3 11,8
16 17,5 14,1 11,6 9,6 8
18 17 13,8 11,4 9,5 7,9 6,5
20 16,6 13,5 11,2 9,3 7,8 6,4 5,3
22 16,1 12,1 11 9,1 7,6 6,3 5,2
24 15,6 12,8 10,8 8,9 7,5 6,2 5
26 15,2 12,5 10,5 8,7 7,3 6,1 4,9
28 14,7 12,1 10,2 8,5 7,2 5,9 4,8
30 14,3 11,8 9,9 8,3 7 5,8 4,6
32 14 11,5 9,7 8,1 6,9 5,7 4,5
34 13,6 11,2 9,4 7,9 6,7 5,5 4,4
36 13,3 11 9,2 7,7 6,6 5,4 4,3
38 12,9 10,7 8,9 7,5 6,4 5,2 4,1
40 12,6 10,5 8,7 7,3 6,3 5,1 4

Crane
44 12 10 8,2 7 6 4,9 3,8
48 11,5 9,5 7,9 6,6 5,7 4,6 3,5
52 11 9,1 7,5 6,3 5,4 4,4 3,3
56 10 8,7 7,2 6 5,1 4,1 3,2
60 8,7 8,2 6,9 5,7 4,9 3,9 3
64 7,6 7,4 6,7 5,5 4,7 3,7 2,8
68 5,5 6,4 6,2 5,3 4,5 3,6 2,7
72 5 5,5 5,1 4,4 3,4 2,5
76 4,7 4,7 4,2 3,3 2,4
80 2,7 4 4 3,2 2,3
84 2,8 3,7 3,1 2,2
88 3,1 2,9 2,1
92 2,5 1,9
96 1,5

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON STRONG FIXED JIB WITH SUPERLIFT

64m 360° 116,8t

116,7t Counterweight
Main Boom (m) 64

350 Tonne
Fixed Jib (m) 15 21 27 33 39 45 51
Radius (m)
12 14,4
14 14,2 11,4 9,4
16 13,9 11,2 9,3 7,7
18 13,6 11,1 9,1 7,5 6,3
20 13,2 10,8 9 7,4 6,2 5
22 12,8 10,5 8,7 7,2 6,1 4,9 3,9
24 12,4 10,2 8,5 7 6 4,8 3,8
26 12 9,9 8,2 6,9 5,8 4,7 3,6
28 11,7 9,6 8 6,7 5,6 4,5 3,5
30 11,3 9,3 7,7 6,5 5,5 4,4 3,4
32 11 9,1 7,5 6,3 5,3 4,3 3,3
34 10,7 8,8 7,3 6,1 5,1 4,1 3,1
36 10,4 8,6 7,1 5,9 5 4 3
38 10 8,3 6,8 5,7 4,8 3,8 2,9
40 9,8 8,1 6,6 5,5 4,7 3,7 2,8

Crane
44 9,3 7,6 6,2 5,2 4,4 3,4 2,5
48 8,8 7,2 5,9 4,9 4,1 3,2 2,3
52 8,4 6,8 5,6 4,6 3,9 2,9 2,1
56 8,1 6,5 5,3 4,3 3,6 2,7 1,9
60 7,8 6,2 5 4,1 3,4 2,5 1,7
64 7,4 5,9 4,7 3,8 3,2 2,4 1,5
68 6,5 5,7 4,5 3,6 3 2,2
72 5 5,3 4,4 3,4 2,9 2,1
76 4,3 4,2 3,3 2,8 1,9
80 2,3 3,8 3,2 2,6 1,8
84 2,5 3 2,5 1,7
88 2,3 2,4 1,6
92 2,3 1,5
96 1,5

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
STRONG FIXED JIB WITH OFFSET SECTION AND SUPERLIFT

54,2m 15-51m 360° 116,7t

0°-
40°

116,7t Counterweight
Main Boom (m) 54,2

350 Tonne
Fixed Fly Jib (m) 15 21* 27* 33* 39 45 51*
Offset 0° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 0° 0° 20° 40°
Radius (m)
12 23,5 18,8
14 22,7 18,2 15,2
16 22 17,6 14,8 12,5 10,2
18 21,3 17,1 15,5 14,3 12,1 10 7,9
20 20,6 16,6 14,9 14 13,4 11,8 9,9 7,9 5,8
22 19,9 16,2 14,3 10,5 13,6 13 11,5 11,6 9,7 7,9 5,8
24 19,2 15,7 13,8 10,2 13,2 12,6 10,1 11,2 11,2 9,5 7,9 5,8
26 18,6 15,3 13,3 10 12,8 11,8 9,9 10,8 10,9 9,2 9,3 7,7 5,8
28 17,9 14,9 12,8 9,8 12,5 11,4 9,7 10,6 10,6 9 9 7,5 5,8
30 17,2 14,5 12,4 9,6 12,2 11,1 9,5 10,3 10,3 8,7 8,8 7,4 5,8 5
32 16,5 14,2 12 9,5 11,9 10,8 9,3 10,1 10,1 8,5 8,6 7,2 5,8 5
34 15,8 13,8 11,6 9,3 11,5 10,5 9 9,8 9,8 8,3 8,4 7 5,7 5
36 15,1 13,5 11,3 9,2 11,3 10,1 8,7 9,6 9,6 8,7 8,2 6,9 5,6 5
38 14,3 13,2 10,9 9 11 9,9 8,4 9,3 9,3 7,9 8 6,7 5,5 4,9 4,1

Crane
40 13,7 12,9 10,6 8,6 10,8 9,4 8,2 9,1 9,1 7,7 7,8 6,6 5,4 4,9 4
44 12,3 12 9,9 8 10,3 8,9 7,7 8,7 8,7 7,3 7,5 6,2 5,1 4,8 3,8
48 10,6 10,4 9,3 7,5 9,8 8,4 7,2 8,3 8,2 6,9 7,1 5,9 4,8 4,5 3,6
52 8,7 8,4 8,7 7,1 8,7 7,7 6,9 7,9 7,8 6,6 6,7 5,6 4,5 4,2 3,5
56 7,2 6,9 7,5 7,2 6,4 6,5 7,2 7,4 6,3 6,4 5,2 4,2 3,9 3,3
60 5,9 5,5 6,1 5,9 5,1 6,1 6,7 6 6,1 4,9 3,9 3,7 3,2
64 3,5 4,5 4,8 4,7 4 4,9 5,4 5,6 4,6 3,6 3,4 3,1
68 2,8 3,7 3 3,9 4,3 4,8 4,3 3,3 3,2 2,9
72 2,5 3 3,3 3,9 3,8 3 3 2,8
76 2,2 2,5 3,1 3 2,5 2,9 2,7
80 2,4 2,3 1,7 2,4 2,7
84 1,6 1,7
* Denotes SF-A-SL

In case of operation with SF-A and SF-A-SL, offset by 20º and 40º, observe the following chart:

total Length of Jib straight Part offsettable Part


21m 6m 15m
27m 12m 15m
33m 18m 15m
51m 24m 27m

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
STRONG FIXED JIB WITH OFFSET SECTION AND SUPERLIFT

64m 15-45m 360° 116,7t

0°-
40°

116,7t Counterweight
Main Boom (m) 64

350 Tonne
Fixed Fly Jib (m) 15 21* 27* 33* 39 45
Offset 0° 0° 20° 40° 0° 20° 40° 0° 20° 40° 0° 0°
Radius (m)
14 14,2 11,8
16 13,7 11,3 9,1
18 13,2 10,9 8,9 6,9
20 12,7 10,6 10,8 8,7 6,9 5,2 3,5
22 12,3 10,2 10,4 8,4 8,6 6,9 5,2 3,5
24 11,9 9,8 10,1 8,8 8,1 8,3 6,7 6,5 5,2 3,5
26 11,5 9,5 9,7 8,5 7,8 8 7,6 6,5 6,5 5,1 3,5
28 11,1 9,2 9,4 8,2 7,6 7,8 7,3 6,3 6,5 6,3 5 3,5
30 10,7 8,9 9,1 8 7,4 7,5 7,1 6,1 6,3 6,3 4,9 3,5
32 10,4 8,6 8,8 7,8 7,2 7,3 6,9 5,9 6,1 6,2 4,8 3,5
34 10 8,3 8,5 7,5 6,9 7,1 6,7 5,7 5,9 6 4,7 3,5
36 9,8 8,1 8,3 7,3 6,7 6,9 6,6 5,5 5,7 5,8 4,6 3,4
38 9,5 7,8 8 7,1 6,4 ,6 6,4 5,3 5,5 5,6 4,4 3,3
40 9,2 7,6 7,8 6,8 6,2 6,4 6,2 5,1 5,3 5,5 4,3 3,2

Crane
44 8,7 7,2 7,3 6,5 5,9 6 5,9 4,8 5 5,1 4 3
48 8,2 6,7 6,9 6,2 5,5 5,7 5,6 4,6 4,7 4,8 3,8 2,8
52 7,8 6,3 6,5 5,9 5,2 5,3 5,4 4,3 4,4 4,5 3,6 2,6
56 7,3 6 6,2 5,6 4,9 5 5,1 4 4,1 4,2 3,3 2,5
60 6 5,6 5,8 5,3 4,6 4,7 4,9 3,7 3,8 4 3,1 2,3
64 4,9 4,5 5 4,3 4,5 4,7 3,5 3,6 3,8 2,9 2,1
68 3,9 3,5 3,9 3,6 4,1 3,3 3,4 3,6 2,8 2
72 2,4 2,6 2,9 2,7 3,1 2,8 3,2 2,6 1,8
76 1,7 1,9 2,2 2,1 2,4 2,5 1,7
80 1,6 2,1 1,5
* Denotes SF-A-SL

In case of operation with SF-A and SF-A-SL, offset by 20º and 40º, observe the following chart:

total Length of Jib straight Part offsettable Part


21m 6m 15m
27m 12m 15m
33m 18m 15m
51m 24m 27m

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB

18,2m 22-72m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
18,2

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66 72**
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
12 61 45,4
14 58,5 45,4
16 55,6 45,4 41,7 32,7
18 50,6 44,6 41,1 32,1 26
20 45,3 46,5 42,9 44,4 40,1 31,6 25,6 20,5
22 37 42,1 40 42,3 39 31,1 25,2 20,1
24 38,4 36,9 33,1 38,6 36,5 36,6 30,7 24,8 19,8 16,1
26 35,2 33,9 35,4 34 33,1 34,9 29,5 30,2 24,4 19,5 15,8 13,4
28 31,3 32,8 31,5 29,2 32,4 28,1 29,4 24,1 19,2 15,6 13,2 11
30 29,2 25 30 28,8 26,8 28,5 23,4 23,8 19 15,4 13 10,8 8,5
32 28,1 27 24,5 27,5 26,4 22,8 23,5 18,7 18,7 15,2 12,9 10,7 8,5
34 26,2 25,1 21,4 25,9 24,7 22,2 23,1 18,5 18,5 14,9 12,7 10,5 8,4

Crane
36 23,5 18,3 24,3 23,1 21,3 22,6 21,9 18,3 18,3 14,8 14,7 12,6 10,4 8,3
38 22,1 21,6 19,1 22 21,2 18 18,1 14,6 14,6 12,4 12,3 10,2 8,2
40 19,9 20,3 16,9 20,7 20 17,8 17,9 17,9 14,5 14,4 12,1 12,2 10,1 8
42 19 14,7 19,4 18,7 16,5 17,8 17,6 14,3 14,2 11,8 12 10 9,9 7,7
44 17,8 17,6 15 17,2 17 14,2 14,1 14,1 11,5 11,8 9,7 9,8 7,5
46 16,6 13,5 16,5 16,3 13,7 14 14 11,2 11,6 9,4 9,6 7,3 7,2
48 15,7 11,9 15,4 15,4 12,7 13,8 13,9 10,9 11,4 11,6 9,1 9,4 7,1 7,1
50 14,4 14,6 11,7 13,5 13,8 10,6 11,1 11,3 8,8 9,2 6,9 7
54 13,2 12,3 12,7 9,5 10,5 10,8 8,3 8,7 9 6,4 6,7
58 11,5 8,5 9,8 10,3 7,8 8,2 8,5 6 6,3 6,5
62 9,1 9,6 7,4 7,8 8 5,7 5,9 6,1
66 7,5 7,7 5,4 5,6 5,8
70 7,4 5,2 5,4 5,5
74 5,1 5,3

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB

27,2m 22-72m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
27,2

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66 72**
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
12 50,9
14 50,2 45,2 36,1
16 49,5 44,8 35,6 28,2 22,5
18 48,9 44,4 35,2 27,8 22,2 18,2
20 46,6 44,8 43,4 34,8 27,4 21,8 17,9 14,6
22 43,2 40,5 42,1 34,4 27 21,5 17,6 14,4 12
24 36,7 37 39,3 37,1 33,7 33,3 26,7 21,2 17,3 14,1 11,8 10,8
26 33,9 33,2 34,1 32,9 33 26,3 26,2 21 17,1 13,9 11,7 10,6 8,9
28 31,3 29,5 31,5 32,1 31,1 26,1 25,9 20,7 20,6 16,9 13,7 11,5 10,4 8,8
30 29,1 27,3 29,2 27,5 28,8 2,8 25,8 25,7 20,5 20,4 16,7 13,5 11,3 10,3 8,6
32 25,5 25,7 25,4 26,8 24,9 24,9 25,2 20,4 20,2 16,4 16,3 13,3 11,2 10,2 8,5
34 23,6 23,8 25,1 23,2 23,9 24,7 22,7 20,2 19,9 16,3 16,2 13,1 13 11 10 8,3

Crane
36 22,2 23,5 21,7 21,3 23,2 21,3 19,9 19,8 16,2 16 13 12,9 10,9 10,7 9,9 8,4
38 20,3 18,6 21,6 19,9 19,5 19,7 19,4 16 15,8 12,8 12,7 10,8 10,6 9,7 7,9
40 19,1 20,4 18,8 18 19,2 18,3 15,9 15,7 12,8 12,6 10,7 10,5 9,6 9,4 7,7
42 19,1 17,6 16,5 18,7 17,2 15,8 15,6 15,4 12,7 12,4 10,6 10,4 9,5 9,3 7,5 7,7
44 16,6 15 17,6 16,2 15 15,5 15,2 12,6 12,4 10,5 10,3 9,3 9,2 7,4 7,6
46 15,6 16,6 15,3 14,2 15,4 14,9 12,5 12,3 12,1 10,4 10,2 9,1 9,1 7,2 7,4
48 15,7 14,4 13,4 15,2 14,1 12,1 12,2 12,1 10,4 10,1 9,9 8,9 9 7 7,3
50 13,7 14,6 13,3 11,7 12,1 12 10,3 10,1 9,8 8,7 8,9 6,8 7,1
54 13,2 12 10,8 12 11,5 9,9 10 9,7 8,2 8,5 8,4 6,4 6,7
58 10,8 11,5 10,3 9,2 9,7 9,7 7,8 8,2 8,2 6 6,4 6,7
62 9,3 9,3 9 7,5 7,8 8 5,6 6 6,3
66 8,9 8,1 7,2 7,5 7,8 5,4 5,6 5,9
70 7,3 7,2 7,3 5,2 5,4 5,6
74 6,6 5,2 5,4
78 5,1

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB

22,7m 22-72m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
22,7

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66 72**
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
12 56,2 40
14 55,3 45,4 39,4 31,1
16 54,3 45,4 38,8 30,6 24,9
18 51,7 45,4 38,3 30,1 24,4 19,6
20 47 45,5 43,6 37,8 29,6 24 19,3 15,7 13,2
22 40,8 41,2 41,8 41,4 37 37,1 29,2 23,7 19 15,5 13 10,8
24 32,7 37,6 36,3 37,7 35,2 36,4 28,8 28,8 23,3 18,7 15,2 12,8 10,7 9,5
26 34,5 32,8 29,8 34,7 33,3 34,3 28,2 28,4 23 18,4 14,9 12,6 10,5 9,3
28 31,9 30,3 32 30,5 30,7 31,6 27,5 28,1 22,7 22,2 18,1 14,7 12,4 10,3 9,2
30 28,1 29,8 28,3 27 29,4 27,8 26,7 27,7 22,4 22 17,9 17,8 14,5 12,2 10,2 9
32 26,1 26,3 27,5 26 25,8 27 25,4 22,1 21,8 17,7 17,6 14,3 14,2 12,1 10,1 8,9
34 25,6 24,1 22,9 25,2 23,6 21,8 21,5 17,5 17,4 14,1 14,1 11,9 9,9 8,7

Crane
36 22,6 20 23,7 22 21,6 21,3 21,2 17,4 17,2 14 13,9 11,8 11,7 9,8 8,5
38 21,1 22,2 20,7 20,1 21,1 20,3 17,2 17 13,8 13,7 11,6 11,5 9,7 9,5 8,2
40 20,8 19,4 18,1 20,2 19,1 17 16,9 16,8 13,7 13,6 11,5 11,4 9,6 9,4 8
42 18,2 16,1 19,2 17,9 16,5 16,8 16,7 13,6 13,4 13,3 11,3 11,2 9,4 9,3 7,8 7,8
44 17,2 18,2 16,9 15,3 16,6 16,2 13,5 13,3 13,2 11,1 11,1 9,3 9,2 7,6 7,7
46 17,1 15,9 14 16,4 15,6 13,3 13,2 13,1 10,9 11 10,9 9,1 9,1 7,3 7,5
48 15,1 12,8 15,7 14,7 12,6 13,1 13 10,8 10,9 10,9 8,9 9 7,1 7,3
50 14,2 15 13,9 11,9 13 12,9 10,6 10,8 10,8 8,7 8,8 8,6 6,9 7,1
54 12,5 10,5 12,5 12,1 9,8 10,5 10,6 8,2 8,5 8,4 6,4 6,8 7
58 11,9 10,9 9 10 10,4 7,9 8,2 8,3 6 6,4 6,6
62 9,9 9,3 9,5 7,6 7,8 8,1 5,7 6 6,2
66 8,6 7,2 7,5 7,8 5,4 5,6 5,9
70 7,2 7,5 5,2 5,4 5,6
74 5,1 5,3
78 5,1

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB

31,7m 22-72m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
31,7

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66 72**
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
14 41,6 30,4
16 40,7 37,8 30 24,2
18 38,8 36,9 29,6 23,8 19,1
20 37,3 35,7 29,3 23,5 18,8 15,4
22 36,2 34 34,6 29,1 23,2 18,6 15,2 12,2
24 34,9 31,9 33,6 28,7 23 18,3 15 12,1 10,9 9,5
26 33,3 30 32,3 29,9 27,9 27,7 22,8 18,2 14,8 11,9 10,8 9,3 7,7
28 28,4 31 28,3 27,1 26,5 22,5 22 18 14,6 11,8 10,7 9,2 7,6
30 27,2 24,4 26,9 26,3 25,3 22,2 21,7 17,8 14,5 11,7 10,5 9 7,5
32 23,1 26 22,7 25,4 24,2 21,9 21,4 17,6 17,5 14,4 11,6 10,4 8,9 7,4
34 22 21,6 24,5 23,1 20,6 21,5 21,1 17,5 17,3 14,2 13,8 11,4 10,3 8,7 7,2
36 20,7 20,6 22,1 19,7 20,5 20,4 17,4 17,1 14,1 13,8 11,3 10,5 10,2 8,6 7,1

Crane
38 19,6 21,1 18,7 19,5 19,6 17,8 17,3 16,9 14 13,7 11,2 10,5 10 8,5 7
40 17,8 19 17,1 16,8 16,7 13,9 13,7 11,1 10,5 9,9 9,2 8,4 6,9
42 16,9 18,3 16,3 16,3 16,4 15,3 13,8 13,6 11 10,5 9,7 9,2 8,3 8,1 6,8
44 15,9 17,2 15,4 15,7 16,1 14,7 13,7 13,5 12,7 11 10,5 9,7 9,2 8,2 8,1 6,7 6,1
46 14,6 15,8 14,2 13,5 13,5 12,4 10,9 10,5 9,6 9,2 8,1 8 6,6 6,1
48 13,8 15,1 13,5 13,3 13,4 12,2 10,9 10,5 9,5 9,5 9,2 8 7,9 6,5 6,1
50 14,3 12,7 13 13,3 11,9 10,8 10,5 9,5 9,4 9,1 7,9 7,8 6,4 6,1
54 11,4 12,5 11 10,8 10,5 9,5 9,2 9,1 8,2 7,8 7,7 6,1 6,1
58 9,9 10,5 9,4 9 9 8,2 7,6 7,6 7,2 5,8 5,9 5,2
62 9,9 8,4 8,8 8,9 8 7,4 7,5 7,2 5,5 5,7 5,2
66 7,6 8,7 7,2 7,1 7,3 7,2 5,3 5,5 5,2
70 6,5 7,1 6,5 5,1 5,3 5,2
74 6,9 5,8 4,9 5,1 5,1
78 5,3 4,9 4,8
82 4,3

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT

36,2m 22-72m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
36,2

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66 72**
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
14 33 26,2
16 31,7 30,4 25,7 20,6
18 30,5 29,3 25,2 20,3 16,6
20 29,3 28,2 24,4 19,9 16,3 13,4
22 28,2 27,2 23,6 19,5 16,1 13,2 10,7
24 27 27,3 26,3 22,9 19,2 15,8 12,9 10,5 9,7
26 25,8 26,3 25,3 25,5 22,2 21,6 18,8 15,6 12,7 10,3 9,5 8,2
28 25,4 24,3 24,6 21,5 21 18,4 18,3 15,4 12,6 10,1 9,3 8 6,6
30 24,5 24,6 23,8 20,9 20,3 17,9 17,8 15,2 12,4 10 9,1 7,9 6,5
32 23,6 23,4 23,1 20,3 19,8 17,4 17,3 14,9 14,6 12,2 9,9 9 7,8 6,4
34 21,7 22,3 21,9 19,2 16,9 16,8 14,6 14,4 12 11,7 9,7 8,8 7,6 6,2
36 20,3 20,6 18,7 18,5 16,4 16,4 14,3 14,1 11,9 11,6 9,6 9,3 8,7 7,5 6,1

Crane
38 19,2 18,2 18 15,9 15,9 15,8 14 13,8 11,8 11,4 9,4 9,2 8,6 7,3 6
40 17,7 17,5 15,5 15,4 13,7 13,5 11,7 11,3 9,4 9,1 8,5 8,2 7,2 5,9
42 16,4 15,1 15 13,3 13,2 13 11,5 11,1 9,3 8,9 8,3 8 7,1 6,9 5,8
44 15,5 14,7 14,6 13 12,9 12,7 11,3 11 9,3 8,8 8,2 7,9 7 6,8 5,7
46 14,2 12,6 12,4 11,1 10,8 10,6 9,2 8,7 8,1 7,8 6,9 6,6 5,6 5,4
48 13,5 12,4 12,2 10,9 10,6 10,4 9,1 8,7 8,4 8,1 7,7 6,8 6,5 5,5 5,3
50 12,7 12,1 11,9 10,7 10,4 10,2 9 8,6 8,3 8,1 7,6 6,7 6,4 5,4 5,2
54 11,1 10,1 9,8 8,7 8,5 8,1 7,8 7,5 7,1 6,6 6,3 5,3 5
58 9,5 8,2 8 7,6 7,2 6,9 6,5 6,1 5,9 5,2 4,9
62 8,7 7,9 7,7 7,1 7 6,7 6,3 6 5,8 5,1 4,8 4,6
66 7,4 6,8 6,5 6,1 5,9 5,6 5 4,7 4,5
70 6,3 5,7 5,5 4,9 4,6 4,4
74 5,7 5,6 5,3 4,8 4,5 4,3
78 5,1 4,4 4,2
82 4,1

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT

40,7 22-72m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
40,7

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66 72**
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
14 28,6
16 27 26,5 21,7
18 26,1 25,2 21,3 17,4 14,3
20 25,2 24,3 20,7 17,1 14 11,3
22 24,4 23,6 20 16,8 13,8 11,2 9,9
24 23,6 23 22,8 19,3 16,5 13,5 11 9,7 8,2
26 22,8 22,2 22,1 21,5 18,8 16,2 13,4 10,9 9,6 8,1 6,9
28 21,5 21,5 20,9 18,3 18 15,9 13,2 10,7 9,4 7,9 6,8 5,4
30 20,9 20,3 17,9 17,5 15,5 15,5 13 10,6 9,2 7,8 6,7 5,3
32 20,3 19,8 17,5 17,1 15,1 15 12,8 10,5 9,1 7,7 6,6 5,3
34 19,6 19,6 19,2 17 16,7 14,7 14,5 12,6 12,3 10,3 8,9 7,5 6,4 5,2
36 18,7 18,5 16,3 14,4 14,2 12,4 12,1 10,2 9,5 8,8 7,4 6,3 5,1

Crane
38 17,7 17,8 15,9 15,6 14 13,8 12,1 11,8 10,1 9,5 8,6 8,1 7,2 6,2 5
40 16,8 15,5 15,2 13,6 13,4 13,2 11,9 11,6 10 9,5 8,5 8,1 7,2 6,1 4,9
42 14,8 13,1 12,9 11,6 11,3 9,9 9,5 8,3 8 7,1 6,7 6 4,8
44 14,2 12,9 12,6 11,3 11,1 10,8 9,8 9,4 8,2 7,9 7 6,6 5,9 5,6 4,7
46 13,6 12,6 12,3 11,1 10,8 10,6 9,6 9,2 8,1 7,8 6,9 6,5 5,8 5,5 4,6
48 12 10,6 10,4 9,4 9 8,4 8 7,7 6,9 6,5 5,8 5,5 4,6 4
50 11,7 10,4 10,1 9,1 8,9 8,3 7,8 7,5 6,8 6,4 5,7 5,4 4,5 4
54 9,8 8,5 8,2 7,6 7,2 6,9 6,6 6,3 6 5,6 5,2 4,4 4
58 9,1 8,2 8 6,9 6,6 6,4 6,2 5,8 5,5 5,1 4,7 4,3 4
62 7,7 6,7 6,4 6,1 5,8 5,5 5,3 5 4,6 4,3 3,9 3,2
66 6,2 5,6 5,3 5,2 4,8 4,5 4,3 3,8 3,2
70 5,9 5,4 5,1 4,7 4,4 4,2 3,7 3,2
74 4,9 4,6 4,3 3,9 3,6 3,2
78 4,2 3,5 3,1
82 4 3,4 3,1
86 3

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT

45,2 22-72m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
45,2

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66 72**
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
14 24,3
16 23,6 22,2 18,6
18 22,9 21,6 18,2 14,9
20 22,1 21 17,8 14,7 11,5
22 21,3 20,4 17,4 14,6 11,5 10,2
24 20,6 19,7 17 14,3 11,5 10,1 8,4
26 20 19,3 19 16,6 14 11,4 9,9 8,2 6,9
28 18,8 18,5 18,2 16,1 13,7 11,3 9,8 8,1 6,8 5,7 4,1
30 18,2 17,7 15,6 15,4 13,4 11,1 9,6 7,9 6,6 5,6 4,1
32 17,8 17,3 15,3 15 13,1 12,6 11 9,5 7,8 6,5 5,5 4,1
34 17,3 16,8 14,9 14,5 12,8 12,4 10,8 9,6 9,3 7,6 6,4 5,4 4,1
36 16,6 16,4 14,2 12,5 12,2 10,6 9,6 9,1 7,5 6,3 5,4 4,1

Crane
38 16,1 15,7 13,8 12,2 12 10,4 9,6 8,9 8,3 7,4 6,2 5,3 4,1
40 15,4 15,3 13,5 13,2 11,9 11,7 10,3 9,6 8,8 8,2 7,3 7 6,1 5,2 4,1
42 14,8 13,3 12,9 11,4 11,1 10,1 9,5 8,6 8,1 7,1 6,8 6 5,1 4
44 12,6 11,2 10,9 9,9 9,4 8,5 8 7 6,7 6 5,4 5 3,9
46 12,3 10,9 10,6 9,7 9,3 8,5 8,3 7,9 6,9 6,5 5,9 5,3 4,9 4,1 3,8
48 11,9 10,6 10,4 9,2 8,5 8,2 7,8 6,8 6,4 5,8 5,3 4,9 4,1 3,8 2,7
50 10,1 9 8,4 8 7,7 7,1 6,7 6,3 5,7 5,2 4,8 4,1 3,7 2,7
54 9,7 8,6 8,3 7,4 6,9 6,4 6,1 5,8 5,5 5,1 4,6 4,1 3,6 2,7
58 8 7,1 6,7 6,2 5,9 5,5 5,3 4,9 4,4 4,5 4,1 3,5 2,7
62 6,5 5,7 5,3 5 4,8 4,3 4,4 4 3,3 3,4 2,7
66 6,3 5,5 5,1 4,6 4,2 4,3 3,9 3,3 3,3 2,7 1,9
70 5 4,4 4,1 4,2 3,8 3,3 3,3 2,7 1,9
74 4 3,7 3,3 3,3 2,7 1,9
78 3,8 3,2 2,6 1,9
82 3,1 2,6 1,9
86 1,9
90 1,9

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT

49,7m 22-72m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
49,7

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66 72**
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
16 18,4
18 17,9 17,3 14,1
20 17,5 16,9 13,9 11 9,8
22 17,1 16,5 13,7 11 9,7 8,3
24 16,8 16,1 13,4 10,9 9,6 8,1 6,6
26 16,4 15,8 13,1 10,8 9,4 7,9 6,5 5
28 15,8 15,6 15,4 12,9 10,6 9,2 7,7 6,3 5 3,9
30 15,2 15 14,8 12,7 11,9 10,4 9 7,6 6,2 5 3,9 2,5
32 14,8 14,5 12,5 11,8 10,3 8,9 7,4 6,1 5 3,9 2,5
34 14,4 14,1 12,3 11,7 10,1 9 8,7 7,2 5,9 4,9 3,9 2,5
36 13,9 13,7 12,1 11,6 10 9 8,5 7,7 7,1 5,8 4,8 3,9 2,5
38 13,4 13,3 11,4 9,8 9 8,4 7,7 6,9 5,7 4,7 3,8 2,5

Crane
40 13 12,8 11,2 9,7 9 8,3 7,7 6,8 6,5 5,6 4,6 3,8 2,5
42 12,6 12,4 10,9 10,5 9,6 8,9 8,1 7,7 6,7 6,3 5,4 4,8 4,5 3,7 2,5
44 12,1 10,7 10,3 8,8 8 7,6 6,6 6,2 5,3 4,8 4,5 3,4 3,7 2,5
46 10,1 8,7 7,8 7,8 7,4 6,5 6,1 5,2 4,8 4,4 3,4 3,6 2,5
48 9,9 8,6 7,8 7,3 6,6 6,4 6 5,2 4,8 4,4 3,4 3,6 2,4 2,5
50 9,7 8,5 7,8 7,2 6,6 6,3 5,9 5,1 4,7 4,3 3,4 3,5 2,4 2,5
54 7,7 6,9 6,5 5,7 5,4 4,9 4,5 4,1 3,4 3,4 2,4 2,4
58 6,3 5,5 5,2 4,8 4,3 3,8 4 3,3 3,2 2,4 2,3
62 6,1 5,4 5 4,2 3,8 3,9 3,3 2,5 3,1 2,4 1,6 2,3
66 4,8 4,1 3,7 3,2 2,5 3,1 2,4 1,6 2,2
70 3,6 3,2 2,5 3 2,4 1,6 2,1
74 3,5 2,5 2,4 1,6 2,1
78 2,5 2,4 1,6
82 1,6
86 1,6

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT

54,2m 22-66m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
54,2

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54 60** 66
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
16 13,4
18 13 12,6 10,1
20 12,6 12,2 9,9 7,5
22 12,2 11,9 9,7 7,5 7,1
24 11,9 11,6 9,5 7,5 6,9 5,7
26 11,6 11,3 9,2 7,3 6,7 5,5 4,2
28 11,4 11,1 9 7,2 6,5 5,3 4,1 2,9
30 10,6 10,9 8,8 7,1 6,3 5,1 4 2,9 2
32 10,4 10,1 8,7 8 7 6,2 5 3,9 2,9 2
34 10,1 9,8 8,5 7,9 6,8 6 4,8 3,8 2,9 2
36 9,9 9,7 8,4 7,7 6,6 5,7 5,9 4,7 3,7 2,8 2
38 9,7 9,5 7,6 6,5 5,7 5,7 5,3 4,6 3,5 2,7 2

Crane
40 9,1 9,3 7,5 6,4 5,7 5,6 5,2 4,5 4,1 3,4 2,7 2
42 8,9 8,7 7,3 6,3 5,6 5,4 5 4,4 3,9 3,3 2,6 1,9
44 8,7 8,6 7,2 6,8 5,6 5,4 4,9 4,3 3,8 3,2 2,6 2,6 1,9
46 8,4 7,1 6,6 5,5 5,3 4,7 4,1 3,7 3,1 2,6 2,5 1,8
48 6,5 5,4 4,7 5,2 4,6 4,1 3,6 3,1 2,6 2,5 1,8
50 6,4 5,4 4,7 4,5 4,2 4 3,5 3 2,5 2,4 1,8
54 4,7 4,4 4 3,9 3,3 3 2,9 2,4 2,3 1,7
58 4,6 3,8 3,2 2,8 2,8 2,2 1,8 2,1 1,5
62 3,7 3,1 2,7 2,1 1,7 2
66 2,6 2,1 1,6 1,8
70 2,5 1,6
74 1,5

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DEMAG AC 350-6
LIFTING CAPACITIES ON LUFFING FLY JIB WITH SUPERLIFT

58,7 22-54m 360° 116,7t

82°-
65°

116,7t Counterweight
Main Boom
58,7

350 Tonne
(m)
Fixed Jib
22* 24 30 36 42 48 54
(m)
Offset 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65° 82° 73° 65°
Radius (m)
18 9,7
20 9,4 9,1 6,7 6
22 9,1 8,9 6,7 6 5
24 8,8 8,6 6,7 5,9 4,9 3,7
26 8,6 8,4 6,6 5,8 4,7 3,6 2,3
28 8,3 8,2 6,5 5,7 4,5 3,5 2,3
30 7,7 8 6,4 5,5 4,4 3,4 2,3
32 7,5 6,3 5,4 4,3 3,3 2,3
34 7,2 7,1 6,1 5 5,2 4,1 3,2 2,2
36 7 7 6 5 5,1 4,3 4 3,1 2,1
38 6,8 6,8 5 5 4,3 3,9 2,9 2

Crane
40 6,7 5 4,9 4,3 3,8 3,4 2,9 2
42 6,2 4,9 4,8 4,2 3,7 3,3 2,8 2,1 1,9
44 6 6 4,9 4,1 3,6 3,2 2,7 2,1 1,8
46 5,8 5,8 4,8 4 4 3,5 3 2,6 2,1 1,7
48 5,7 4 4 3,5 3 2,6 2,1 1,7
50 4 3,9 3,2 2,9 2,5 2 1,6
54 3,9 3,2 2,7 2,4 2,4 1,8
58 3,1 2,6 2,2 1,7
62 2,1 1,7
66 2

* Denotes SF-A-SL

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
DIMENSIONS

500 Tonne
Crane
HOOKBLOCK

Vehicle weight 96,00kg Capacity 171te 84te 37te 12,5


Weight 2750kg 1800kg 1230kg 600kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
MAIN BOOM DUTIES

Lifting capacities on guyed telescopic boom — 165 t counterweight


Radius 31,7m 36,9m 42,1m 47,3m 52,5m 57,7m 62,9m 68,1m 73,4m 78,6m 84m

500 Tonne
(m)
5 204
6 198 167
7 190 162 127
8 170 157 123 121
9 154 147 119 117 111
10 140 135 115 113 107 96
12 120 114 108 105 101 91 81
14 103 104 96 96 91 86 77 70 62
16 93 93 86 86 83 79 74 66 59 52 44
18 83 83 82 79 75 73 69 63 57 49,5 42
20 73 74 74 73 70 67 65 59 54 47,5 40,5
22 65 67 67 66 66 61 60 55 52 45,5 38,5
24 59 60 60 61 60 57 55 52 49 44 36,5
26 53 55 54 55 54 53 51 49,5 45,5 42 35
28 47,5 49,5 49 50 48,5 50 47 46,5 42 40 33,5
30 36,5 45 44,5 46 44,5 45,5 43 43 39 38,5 32
32 41 40,5 42 40,5 41,5 39,5 40 36,5 36 30,5
34 36,5 37 38,5 37 38 36 37 33,5 33,5 29,4
36 34 35,5 34 35 33 34 30,5 31 28,1

Crane
38 31,5 32,5 31 32 30,5 31,5 28,3 28,7 26,9
40 24,6 30 28,7 29,7 27,8 28,8 26 26,5 25,8
42 27,9 26,4 27,5 25,6 26,6 24 24,6 24,2
44 24,7 24,4 25,4 23,5 24,5 22 22,8 22,5
46 15,2 22,5 23,5 21,7 22,6 20,1 21,1 20,8
48 20,8 21,8 20 20,9 18,4 19,4 19,3
50 16 20,3 18,4 19,4 16,8 17,8 17,9
52 18,9 16,9 17,9 15,4 16,4 16,6
54 16,2 15,6 16,6 14,1 15,1 15,2
56 10,8 14,4 15,3 12,8 13,8 14
58 12,6 14,2 11,7 12,7 12,8
60 9,3 13,1 10,6 11,6 11,8
62 12,1 9,6 10,6 10,8
64 9,7 8,7 9,6 9,8
66 7,8 8,7 8,9
68 5,9 7,9 8,1
70 7 7,3
72 5,9 6,6
74 4,1 5,8
76 5
78 3,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
47,3m + 2,2m*

500 Tonne
Radius 6m** 14m 21m 28m 35m 42m 49m 56m
(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º
9 93
10 93 67
12 91 65 38,5 61 46
14 82 61 37 57 42,5 31,5 24,5
16 74 57 35,5 54 31,5 39,5 29,2 22,7 17,5 13,1
18 67 53 34,5 51 30,5 37,5 19,5 27,4 21,2 16,3 12,2 9,8
20 61 50 33,5 48 29,4 20,1 35 18,7 25,7 19,9 15,3 11,3 9
22 55 47 32,5 45,5 28,5 19,9 33 18,1 24,3 12,4 18,8 14,4 10,6 8,4
24 50 44,5 31,5 43 27,8 19,8 31 17,4 11,7 23 11,9 17,8 13,6 9,9 7,8
26 45,5 42 30,5 40,5 27,1 19,7 29,5 16,9 11,5 21,7 11,4 16,8 8,6 12,9 9,3 7,3
28 40,5 40 29,8 38,5 26,5 19,6 27,9 16,4 11,4 20,4 11 15,8 8,2 12,1 8,8 6,8
30 36 37,5 29,1 37 25,9 19,6 26,6 15,9 11,3 19,3 10,6 7 14,9 7,9 11,5 5,9 8,3 6,4
32 32,5 33,5 28,5 34,5 25,4 19,5 25,3 15,5 11,1 18,4 10,3 6,8 14 7,5 10,8 5,6 7,8 6

Crane
34 28,8 29,8 27,9 31 25 19,5 24 15,1 11,1 17,5 10 6,7 13,3 7,2 10,2 5,3 7,3 5,6
36 25,7 26,6 27,2 28,1 24,5 19,5 22,8 14,8 11 16,7 9,7 6,6 12,7 6,9 4,3 9,6 5 6,9 5,2
38 22,9 23,8 24,3 25,4 24,1 19,5 21,7 14,5 11 15,8 9,4 6,4 12,2 6,6 4,1 9,2 4,8 6,5 4,9
40 20,4 21,2 21,6 22,9 23,8 19,5 20,8 14,2 11 15 9,2 6,4 11,5 6,4 4 8,8 4,5 6,1 4,5
42 18,2 18,8 20,6 22,3 19,5 20 13,9 11 14,3 9 6,3 10,9 6,2 3,9 8,3 4,3 5,8 4,2
44 16,2 16,7 18,6 20,1 19,5 19,3 13,6 11 13,7 8,8 6,3 10,4 6 3,7 7,9 4,1 5,5 3,9
46 14,3 14,8 16,7 18,1 18,9 18,2 13,5 11 13,2 8,6 6,3 9,8 5,9 3,7 7,5 3,9 5,2 3,7
48 12,6 13 15 16,2 17 16,5 13,3 11 12,7 8,4 6,3 9,4 5,7 3,6 7 3,8 4,9 3,5
50 10,5 13,4 14,5 14,9 13,2 11 12,2 8,2 6,3 9 5,6 3,6 6,7 3,7 4,7 3,3
52 6,4 12 13 13,4 13 11 11,7 8,1 6,3 8,7 5,4 3,6 6,4 3,6 4,4 3
54 10,7 11,5 12,1 12,9 11 11,3 8 6,3 8,3 5,3 3,6 6,1 3,5 4,1 2,8
56 9,4 10,1 10,8 12,2 11 10,9 8 6,3 8 5,2 3,6 5,9 3,4 3,9 2,7
58 7,4 9,7 10,9 10,5 7,9 6,3 7,7 5,1 3,6 5,6 3,3 3,7 2,5
60 8,6 9,7 9,6 7,8 6,3 7,4 5,1 3,6 5,4 3,3 3,6 2,3
62 7,6 8,5 8,6 7,7 6,3 7,1 5 3,6 5,2 3,2 3,4 2,2
64 6,1 7,4 7,7 7,7 6,8 4,9 3,6 4,9 3,1 3,3 2
66 4 6,8 7,6 6,6 4,9 3,6 4,7 3,1 3,1 1,9
68 5,9 7 6,4 4,8 3,6 4,5 3 3 1,8
70 4,7 6,1 6,1 4,8 3,6 4,4 3 2,8
72 3,3 5,4 4,7 4,3 3 2,7
74 4,7 4,7 4,2 2,9 2,6
76 3,9 4,7 4 2,9 2,5
78 2,7 4,3 3,9 2,9 2,4
* Adapter ** Option

80 3,7 2,9 2,3


82 2,9 2,9 2,2
84 1,9 2,9 2,1
86 2
88 1,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
57,7m + 2,2m*

500 Tonne
Radius 6m** 14m 21m 28m 35m 42m 49m 56m
(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º
12 69
14 68 62 38 55 42,5
16 65 58 36,5 52 39,5 29,1
18 60 55 35,5 49,5 32 37,5 27,3 21,1
20 55 53 34,5 47,5 31 35,5 25,9 19,9 15,2 11,9
22 51 50 33,5 45,5 30,5 20,6 34 18,9 24,7 18,8 14,4 11,2 8,4
24 46,5 46,5 32,5 43 29,7 20,6 32,5 18,4 23,5 18 13,7 10,6 7,8
26 43 43 32 40 29,1 20,5 31 17,9 22,5 12,8 17,2 13,1 10,1 7,4
28 39,5 40 31 37 28,5 20,5 29,7 17,4 11,8 21,6 12,4 16,4 12,5 9,6 6,9
30 36,5 37 30,5 34,5 28 20,4 28,5 17 11,7 20,7 12 15,7 8,1 12 9,2 6,6
32 33 34 29,8 32 27,5 20,4 27,3 16,6 11,6 19,9 11,7 6,9 15,1 7,9 11,5 5,5 8,7 6,2
34 30 31 29,2 30 27 20,4 26,3 16,3 11,6 19,1 11,3 6,8 14,5 7,6 11 5,3 8,3 5,9
36 27,1 28,1 28,7 28 26,5 20,4 25,4 16 11,5 18,3 11 6,8 13,9 7,4 10,5 5,1 7,9 5,6
38 24,5 25,4 26 25,6 26,1 20,4 24,4 15,7 11,5 17,7 10,7 6,7 13,4 7,1 4,2 10 4,9 7,6 5,3

Crane
40 22 22,8 23,3 23,4 25,1 20,4 22,8 15,4 11,5 17,1 10,5 6,7 12,8 6,9 4,1 9,6 4,7 7,2 5
42 19,8 20,5 21 21,3 23,1 20,4 21,4 15,2 11,5 16,6 10,3 6,6 12,4 6,7 4 9,2 4,6 6,9 4,7
44 17,7 18,4 18,8 19,5 21,1 20,4 20 15 11,5 16 10,1 6,6 11,9 6,5 3,9 8,8 4,4 6,5 4,5
46 15,9 16,5 16,8 17,6 19,1 20,2 18,3 14,7 11,5 15,3 9,9 6,6 11,5 6,4 3,9 8,5 4,3 6,2 4,2
48 14,2 14,7 15 15,9 17,3 18,2 16,8 14,5 11,5 14,7 9,7 6,6 11,1 6,3 3,8 8,2 4,1 6 4
50 12,6 13,1 14,3 15,6 16,5 15,3 14,3 11,5 14,2 9,6 6,6 10,6 6,1 3,8 7,9 4 5,7 3,8
52 11,2 11,6 12,9 14,1 14,8 13,9 14,2 11,5 13,8 9,4 6,6 10,1 6 3,8 7,5 3,9 5,5 3,6
54 9,8 10,2 11,5 12,6 13,3 12,5 14,1 11,5 13,2 9,2 6,6 9,7 5,9 3,8 7,2 3,8 5,3 3,4
56 8,6 8,9 10,3 11,3 11,8 11,3 12,9 11,5 12,1 9,1 6,6 9,4 5,8 3,8 6,8 3,8 5 3,2
58 7,5 7,7 9,2 10,1 10,1 11,6 11,5 10,9 9 6,6 9,1 5,6 3,8 6,5 3,7 4,8 3
60 5,6 8,1 8,9 9 10,4 11,3 9,8 8,9 6,6 8,8 5,5 3,8 6,3 3,6 4,6 2,9
62 7,1 7,8 8 9,3 10,1 8,8 8,9 6,6 8,5 5,4 3,8 6,1 3,5 4,3 2,7
64 6,2 6,8 7,1 8,3 8,9 7,9 8,8 6,6 8,3 5,4 3,8 5,9 3,5 4,2 2,6
66 5,1 5,8 6,2 7,3 7 8,5 6,6 7,8 5,3 3,8 5,7 3,4 4 2,4
68 3,6 5,4 6,3 6,2 7,6 6,6 6,9 5,3 3,8 5,5 3,4 3,9 2,3
70 4,7 5,4 5,4 6,7 6,6 6,1 5,3 3,8 5,3 3,3 3,7 2,2
72 4 4,7 4,7 5,8 5,4 5,2 3,8 5,1 3,3 3,6 2,1
74 2,8 3,7 4,2 5 4,8 5,2 3,8 5 3,3 3,5 2
76 3,6 4,4 4,2 5,1 3,8 4,5 3,2 3,3 1,9
78 3 3,8 3,7 4,8 4 3,2 3,2 1,7
80 1,9 3,2 3,2 4,2 3,6 3,2 3,1 1,7
82 2,6 3,7 3,1 3,1 3 1,6
* Adapter ** Option

84 2,1 3,1 2,5 3,1 2,9 1,5


86 2,4 2 3,1 2,4
88 1,7 1,5 2,8 1,9
90 2,1 1,4
92 1,5

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
68,1m + 2,2m*

500 Tonne
Radius 6m** 14m 21m 28m 35m 42m 49m 56m
(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º
14 50
16 49,5 50 42
18 47,5 47,5 35,5 40,5 32
20 45 45 34,5 38 30,5 30,5 23,8
22 42,5 42,5 34 36 29,7 29,3 22,7 17,8
24 40,5 40 33 34,5 28,8 21,1 28,1 18,9 21,7 17 12,8
26 38,5 37,5 32,5 33 27,9 21,1 27,1 18,5 20,9 16,3 12,3 9,6 6,8
28 36 35,5 31,5 31,5 27,1 21,1 26,1 18,1 20,1 12,4 15,7 11,8 9,2 6,4
30 33,5 33 31 29,9 26,4 21,1 25,2 17,8 12,1 19,4 12,1 15,1 11,3 8,8 6,1
32 31,5 31 30,5 28,2 25,7 21.1 24,4 17,4 12 18,8 11,8 14,6 10,9 8,5 5,8
34 29,2 29,1 29,2 26,5 25 21 23,6 17,1 12 18,1 11,6 14,1 7,6 10,6 8,1 5,5
36 27,2 27,3 27,4 24,9 24,5 20,7 22,7 16,8 12 17,5 11,3 6,8 13,6 7,4 10,2 4,9 7,8 5,3
38 24,8 25,6 25,9 23,4 23,5 20,4 21,4 16,6 12 17 11,1 6,8 13,1 7,2 9,9 4,8 7,6 5

Crane
40 22,7 23,5 24,1 22 22,2 20,2 20,2 16,3 12 16,4 10,9 6,8 12,7 7,1 9,6 4,6 7,3 4,8
42 20,6 21,4 22 20,7 21 19,9 19,1 15,9 12 15,9 10,7 6,8 12,3 6,9 4 9,3 4,5 7,1 4,6
44 18,8 19,5 20 19,5 19,8 19,8 18 15,5 12 15,4 10,5 6,7 11,9 6,7 3,9 9 4,4 6,8 4,4
46 17,1 17,8 18,2 17,9 18,7 19,3 17 15,2 12 15 10,3 6,7 11,5 6,6 3,9 8,7 4,3 6,6 4,2
48 15,5 16,1 16,4 16,4 17,7 18,2 16 14,9 12 14,6 10,2 6,7 11,2 6,4 3,9 8,5 4,2 6,3 4
50 13,9 14,5 14,8 15 16,4 17,2 15,1 14,6 12 13,9 10 6,7 10,8 6,3 3,8 8,2 4,1 6,1 3,8
52 12,4 13 13,3 13,7 15 15,9 14,1 14,3 12 13,1 9,9 6,7 10,5 6,2 3,8 8 4 5,8 5,7
54 11,1 11,6 11,9 12,4 13,6 14,4 12,9 14 12 12,4 9,8 6,7 10,2 6,1 3,8 7,8 3,9 5,6 3,5
56 9,9 10,3 10,5 11,2 12,3 13 11,8 13,5 12 11,7 9,7 6,7 10 6 3,8 7,5 3,8 5,5 3,3
58 8,7 9,1 10 11,1 11,7 10,8 12,3 12 11,1 9,5 6,7 9,7 5,9 3,8 7,2 3,8 5,3 3,2
60 7,7 8 9 9,9 10,5 9,7 11,2 11,9 10,1 9,4 6,7 9,3 5,8 3,8 7 3,7 5,1 3
62 6,7 7 8 8,9 9,4 8,7 10,1 11,1 9,2 9,2 6,7 9 5,8 3,8 6,7 3,7 4,9 2,9
64 5,7 6 7 7,8 8,3 7,7 9,1 9,9 8,3 9,1 6,7 8,6 5,7 3,8 6,5 3,6 4,8 2,8
66 4,9 5,1 6,2 6,9 6,9 8,1 8,9 7,5 8,9 6,7 7,8 5,6 3,8 6,3 3,6 4,6 2,6
68 4,1 4,1 5,3 6 6 7,2 7,9 6,6 8,2 6,7 7 5,5 3,8 6,1 3,5 4,4 2,5
70 2,7 4,6 5,1 5,3 6,3 6,9 5,8 7,4 6,7 6,3 5,5 3,8 5,9 3,5 4,2 2,4
72 4,1 4,5 4,6 5,5 5,1 6,5 6,7 5,5 5,5 3,8 5,7 3,4 4,1 2,3
74 3,5 3,9 4,1 4,8 4,5 5,7 6,6 4,9 5,4 3,8 5,1 3,4 4 2,2
76 2,5 3,2 3,5 4,2 4 5 5,7 4,4 5,4 3,8 4,5 3,4 3,9 2,1
78 2,9 3,6 3,5 4,4 4,9 3,8 5,1 3,8 4 3,3 3,7 2
80 2,3 3 2,9 3,9 3,3 4,5 3,8 3,4 3,3 3,6 1,9
82 1,5 2,3 2,3 3,3 2,8 4 3,8 2,9 3,3 3,1 1,8
84 1,8 2,7 2,3 3,5 3,8 2,4 3,3 2,6 1,7
* Adapter ** Option

86 2,1 1,7 3 1,9 3,3 2,2 1,6


88 1,4 2,4 1,5 2,9 1,7 1,6
90 1,8 2,4
92 1,9
94 1,4

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
78,6m + 2,2m*

500 Tonne
Radius 6m** 14m 21m 28m 35m 42m
(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º
19 37
18 35,5 33,5 28,9
20 34 32,5 32,5 27,6 22,5
22 32 31,5 31 26,4 21,4 17,4
24 29,4 29,4 30 25,4 23 20,5 16,6
26 29,4 29,4 29,2 24,5 22,2 19,7 15,8 12,7
28 28,2 28,2 28,3 23,7 21,4 18,8 19 15,8 15,2 12,2 9,9
30 27,1 27,1 27,2 22,8 20,7 18,3 18,3 15,3 14,6 11,7 9,5
32 25,9 25,9 25,9 21,9 20,1 17,9 17,7 14,9 14 11,2 9,1
34 24,9 24,7 24,7 21,1 19,5 17,5 17,2 14,5 11,9 13,5 10,8 10,8 8,7
36 23,7 23,6 23,7 20,3 18,9 17,1 16,6 14,1 11,7 13,1 10,5 10,4 8,4
38 22,5 22,5 22,6 19,5 18,4 16,7 16,1 13,7 11,5 12,6 10,2 10,1 7,1 8,1
40 21,2 21,4 21,4 18,6 17,9 16,3 15,6 13,4 11,2 12,2 9,9 6,6 9,7 7 7,8
42 20 20,2 20,3 17,8 17,4 16 15,1 13 11 11,8 9,6 6,6 9,4 6,9 7,5 4,4

Crane
44 18,9 19,1 19,2 17 16,8 15,6 14,6 12,6 10,8 11,4 9,3 6,6 9,1 6,8 7,3 4,3
46 17,7 18,1 18,2 16,2 16,2 15,2 14,2 12,3 10,6 11,1 9,1 6,6 8,8 6,7 3,8 7 4,2
48 16,2 16,8 17,3 15,3 15,5 14,8 13,7 11,9 10,3 10,7 8,8 6,6 8,5 6,5 3,8 6,8 4,2
50 14,8 15,4 15,8 14,5 14,7 14,4 13,1 11,6 10,1 10,3 8,5 6,6 8,2 6,4 3,8 6,5 4,1
52 13,5 14 14,4 13,7 14 14,1 12,6 11,3 9,9 10 8,3 6,6 7,9 6,2 3,8 6,3 4
54 12,3 12,8 13,2 13 13,2 13,8 11,9 11 9,8 9,7 8,1 6,6 7,6 6,1 3,8 6,1 3,9
56 11,1 11,6 11,9 11,9 12,6 13,2 11,3 10,6 9,6 9,4 7,8 6,6 7,4 5,9 3,8 5,9 3,9
58 10 10,4 10,7 10,8 11,9 12,6 10,7 10,3 9,4 9,1 7,6 6,5 7,1 5,7 3,8 5,6 3,9
60 8,9 9,3 9,6 9,9 10,9 11,6 10,1 10 9,2 8,8 7,4 6,4 6,9 5,5 3,8 5,4 3,8
62 7,9 8,3 8,5 8,9 9,9 10,5 9,3 9,8 9 8,6 7,2 6,2 6,7 5,4 3,8 5,2 3,7
64 7 7,3 7,5 8 8,9 9,4 8,4 9,5 8,8 8,3 7 6 6,5 5,3 3,8 5,1 3,7
66 6,1 6,4 7,1 8 8,5 7,6 8,9 8,6 7,6 6,7 5,9 6,3 5,1 3,8 4,9 3,5
68 5,3 5,6 6,3 7,1 7,5 6,8 8,1 8,4 6,9 6,5 5,8 6,1 5 3,8 4,7 3,4
70 4,6 4,8 5,5 6,2 6,6 6 7,2 7,9 6,2 6,3 5,6 5,9 4,8 3,8 4,5 3,2
72 4 4,2 4,8 5,4 5,8 5,3 6,4 7,1 5,5 6,2 5,5 5,7 4,6 3,8 4,4 3,1
74 3,4 3,6 4,3 4,8 4,7 5,6 6,2 4,9 6 5,4 5,1 4,5 3,7 4,2 3
76 2,7 3 3,7 4,2 4,1 4,9 5,4 4,3 5,5 5,2 4,5 4,3 3,6 4,1 2,8
78 1,9 2,2 3,2 3,6 3,6 4,4 4,7 3,7 4,9 5,1 3,9 4,2 3,5 3,9 2,7
80 2,6 3,1 3,1 3,8 3,2 4,3 4,9 3,4 4,1 3,5 3,6 2,5
82 2 2,4 2,5 3,3 2,7 3,8 4,4 2,9 4 3,4 3,1 2,4
* Adapter ** Option

84 1,4 1,8 2 2,7 2,2 3,2 3,8 2,4 3,8 3,3 2,6 2,2
86 1,4 2,1 1,7 2,7 3,2 1,9 3,2 3,2 2,1 2,1
88 1,5 2,2 1,5 2,7 3 1,7 1,9
90 1,6 2,2 2,8 1,7
92 1,7 2,4 1,5
94 1,3

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
47,3m + 2,2m*

500 Tonne
Radius 6m** 14m 21m 28m 35m 42m 49m 56m
(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º
9 93
10 91
12 87 65 74 53
14 84 61 42,5 69 49,5 38
16 74 57 41 64 40 46,5 35,5 28,5 23,7
18 67 54 40 61 39,5 43,5 33 26,7 22,2 17,8
20 60 51 38,5 57 38,5 24,7 41 24,7 31 25,2 20,9 16,7 13,5
22 55 49 37,5 53 37 24,7 39 24,6 29,5 23,7 19,7 15,8 12,8
24 49,5 46,5 37 48,5 36 24,7 37 24,3 13,5 27,9 14,7 22,5 18,6 15 12,1
26 45 44,5 36 45 34,5 24,4 35 24,1 13,6 26,4 14,4 21,3 12,5 17,7 14,1 11,4
28 40 41,5 35,5 41 33,5 23,9 33,5 23,9 13,8 25,3 14,2 20,1 12,3 16,8 13,5 10,8
30 35,5 37 34,5 37,5 32,5 23,5 32 23,5 14,1 24,1 14,1 8,8 19,3 12 15,9 8,8 12,8 10,2
32 31,5 33 33,5 34 31,5 23,2 30,5 22,7 14,4 22,9 13,9 8,8 18,4 11,7 15,2 8,5 12,1 9,7

Crane
34 28,3 29,3 30 30,5 30,5 22,8 29,1 22 14,5 21,8 13,8 8,8 17,6 11,5 14,5 8,3 11,5 9,2
36 25,2 26,1 26,7 27,7 29,9 22,6 27,8 21,3 14,4 20,9 13,7 8,8 16,7 11,3 5,6 13,9 8,1 11 8,7
38 22,4 23,2 23,7 24,9 26,9 22,3 26,2 20,7 14,3 20,1 13,6 8,8 16 11,1 5,5 13,2 8 10,5 8,3
40 19,9 20,7 22,4 24,3 22,1 23,9 20,1 14,1 19,2 13,6 8,8 15,4 11 5,5 12,5 7,8 10,1 7,9
42 17,6 18,3 20,1 21,9 22 21,7 19,6 13,9 18,3 13,4 8,8 14,7 10,8 5,5 12,1 7,7 9,6 7,6
44 15,6 16,2 18,1 19,7 20,7 19,6 19 13,7 17,6 13,3 8,8 14,1 10,7 5,5 11,6 7,5 9,1 7,2
46 13,8 14,2 16,2 17,6 18,5 17,7 18,6 13,5 17 13,2 8,8 13,5 10,6 5,5 11,1 7.4 8,7 6,8
48 12,1 12,5 14,5 15,8 16 18,1 13,4 16,3 13 8,8 13 10,3 5,5 10,7 7,3 8,4 6,5
50 10,1 13 14,1 14,5 16,3 13,3 15,6 12,8 8,8 12,5 10,1 5,5 10,2 7,2 8 6,2
52 6,4 11,5 12,5 13 14,7 13,2 14,1 12,5 8,8 12 9,8 5,5 9,8 7,1 7,7 5,9
54 10,2 11 11,7 13,2 13,2 12,7 12,2 8,8 11,4 9,6 5,5 9,4 6,9 7,3 5,6
56 8,9 9,6 10,4 11,8 11,5 11,9 8,8 10,9 9,4 5,5 9 6,8 7 5,3
58 6,9 9,2 10,5 10,3 11,5 8,8 10,5 9,1 5,5 8,6 6,6 6,7 5
60 8,2 9,3 9,2 11 8,8 10,1 8,9 5,5 8,1 6,5 6,3 4,8
62 7,2 8,1 8,2 9,8 9,2 8,6 5,5 7,7 6,3 6 4,5
64 5,6 7 7,3 8,7 8,3 8,4 5,5 7,5 6,1 5,7 4,3
66 3,6 6,4 7,7 7,4 8,2 5,5 7,2 5,9 5,4 4,1
68 5,6 6,7 6,5 8,1 5,5 6,9 5,7 5,1 3,9
70 4,4 5,7 5,8 7,3 6,3 5,6 4,9 3,7
72 2,9 5 6,4 5,6 5,5 4,7 3,5
74 4,4 4,5 4,9 5,3 4,5 3,3
76 3,5 4,7 4,4 5,2 4,3 3,2
78 2,4 4,1 3,9 5 4,1 3
80 3,4 4,4 3,7 2,9
* Adapter ** Option

82 2,6 3,8 3,3 2,7


84 1,5 3,3 2,8 2,6
86 2,2 2,4
88 1,5 2,1
90 1,6

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
57,7m + 2,2m*

500 Tonne
Radius 6m** 14m 21m 28m 35m 42m 49m 56m
(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º
12 82
14 77 62
16 69 59 42 67 46,5 35,5
18 62 56 40,5 64 40 44 33,5 26 21,5
20 56 54 39,5 59 39 42 32 24,7 20,4 16,2
22 51 51 38,5 54 37,5 24,7 39,5 24,3 30 23,5 19,3 15,4 12,5
24 46,5 47 38 49 36,5 24,7 38 24,4 28,7 22,3 18,4 14,6 12,5
26 42,5 43,5 37 45 35,5 24,7 36,5 24,5 27,5 15,2 21,2 17,6 14 12
28 39 40 36 41,5 34,5 24,7 34,5 24,6 13,1 26,3 15,1 20,4 16,7 13,3 11,5
30 36 36,5 35,5 38,5 33,5 24,3 33 24,1 13,4 25 15,1 19,5 11,8 16 12,6 10,9
32 32,5 33,5 34 35,5 32,5 23,9 32 23,3 13,8 24,1 15,1 9 18,6 11,6 15,3 12,1 10,4
34 29,4 30,5 31,5 33 31,5 23,6 29,8 22,6 14,1 23,2 15,1 9,1 17,8 11,5 14,6 8,2 11,6 9,9
36 26,6 27,6 28,3 30 29,5 23,4 27,7 22,1 14,4 22,3 15,1 9,2 17,2 11,4 14 8,1 11,1 9,5
38 23,9 24,9 25,5 27,5 27,2 23,1 25,4 21,5 14,6 21,4 15,1 9,4 16,5 11,4 5,3 13,5 8,1 10,6 9,1

Crane
40 21,5 22,3 22,8 25,1 24,8 22,8 23,3 20,9 14,4 20,6 14,9 9,6 15,9 11,3 5,3 13 8 10,2 8,6
42 19,2 20 20,4 22,9 22,7 22,6 21,3 20,3 14,2 19,9 14,6 9,8 15,2 11,2 5,3 12,5 7,9 9,8 8,3
44 17,2 17,9 18,3 20,8 20,6 21,8 19,5 19,9 14 19,2 14,3 10 14,7 11,1 5,4 12 7,8 9,4 7,9
46 15,3 15,9 16,3 19 18,6 19,7 17,8 19,4 13,8 18,2 14 9,8 14,2 11 5,5 11,5 7,8 9 7,6
48 13,6 14,2 17,1 16,8 17,8 16,3 18,5 13,6 16,7 13,7 9,7 13,8 10,8 5,6 11,1 7,7 8,6 7,3
50 12 12,6 15,4 15,1 16 14,8 16,9 13,5 15,3 13,4 9,5 13,3 10,6 5,8 10,7 7,6 8,3 7
52 10,3 11,1 13,8 13,6 14,4 13,4 15,3 13,3 14 13,1 9,3 12,8 10,5 5,9 10,4 7,5 8 6,6
54 8,8 9,5 12,4 12,2 12,8 12,1 13,8 13,1 12,8 12,8 9,2 12,3 10,2 6 10 7,4 7,7 6,3
56 7,4 7,9 11 10,8 10,8 12,5 12,8 11,6 12,4 9,1 11,8 9,9 6,1 9,6 7,3 7,4 6,1
58 5,9 6,5 9,8 9,6 9,7 11,2 12,2 10,5 11,9 9 11,2 9,7 6,2 9,3 7,1 7,2 5,9
60 4,5 8,7 8,4 8,6 10 10,9 9,4 11,4 8,9 10,2 9,4 6,1 8,9 6,9 6,9 5,6
62 7,6 7,3 7,6 8,9 8,4 10,2 8,8 9,2 9,2 6 8,5 6,7 6,6 5,4
64 6,5 6,2 6,6 7,8 7,5 9,2 8,8 8,3 9 5,9 8,2 6,5 6,3 5,2
66 5,4 4,9 5,8 6,8 6,6 8,2 8,7 7,4 8,8 5,8 7,8 6,3 6,1 4,9
68 4,2 4,9 5,9 5,7 7,2 8 6,5 8,5 5,8 6,9 6,1 5,8 4,7
70 3 4 5 5 6,3 5,8 7,6 5,7 6,2 6 5,6 4,6
72 3 3,8 4,4 5,5 5 6,7 5,7 5,4 5,8 5,3 4,4
74 2 3,8 4,7 4,4 5,9 5,4 4,8 5,7 5,1 4,2
76 2,9 4 3,9 5,1 4,2 5,5 4,6 4
78 2 3 3,4 4,5 3,7 5,2 4,1 3,8
* Adapter ** Option

80 1,9 2,7 3,9 3,2 4,6 3,6 3,6


82 1,9 3,2 2,7 4,1 3,1 3,1
84 2,2 2,1 3,5 2,6 2,6
86 1,6 3 2,1 2,2
88 2,4 1,6 1,7
90 1,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
68,1m + 2,2m*

500 Tonne
Radius 6m** 14m 21m 28m 35m 42m 49m 56m
(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 0º 0º
16 60
18 56 55 48,5
20 52 52 39,5 46 38,5 29,3
22 47,5 48,5 38,5 43,5 37 28,1 22,6
24 43,5 44,5 37,5 40,5 36,5 35 27 21,7 17,2
26 40 40,5 37 38,5 35,5 24,7 33,5 24,1 26 20,8 16,4 12,9
28 37 37,5 36,5 36 34,5 24,5 31,5 24 24,9 20 15,8 12,4 10,5
30 34 34,5 35 33,5 33 24,2 30 23,6 12,6 24 14,6 19,2 15,2 11,9 10,1
32 31,5 32 32,5 31 32 23,9 28,4 23 13,1 23,2 14,7 18,5 14,6 11,4 9,7
34 28,2 29,8 30,5 28,7 29,9 23,6 26,9 22,4 13,6 22,4 14,9 17,9 10,9 14 10,9 9,3
36 25,5 27,2 28,1 26,7 27,9 23,3 25,7 21,9 14,1 21,6 15,1 8,7 17,2 10,9 13,5 10,5 8,9
38 23,2 24,7 25,7 24,8 26 23,1 24,2 21,3 14,6 20,8 15,2 8,9 16,6 11 13,1 7,5 10,1 8,5
40 20,9 22,1 23,2 22,7 24,2 22,9 22,7 20,8 14,4 20 15 9,2 16,1 11,1 12,6 7,5 9,8 8,2

Crane
42 18,6 19,7 20,8 20,8 22,6 22,7 21 20,4 14,2 19,2 14,7 9,6 15,6 11,1 4,8 12,1 7,6 9,4 7,9
44 16,6 17,9 18,6 19 20,7 22,1 19,3 19,9 14 18,4 14,4 9,8 15,1 11,1 4,9 11,8 7,6 9 7,6
46 15 16 16,7 17,4 19 20,3 17,7 19,5 13,9 17,5 14,1 9,7 14,7 11 5 11,4 7,6 8,7 7,3
48 13,3 14,2 14,8 15,6 17,4 18,5 16,2 18,4 13,7 16,4 13,8 9,7 14,2 10,9 5,1 11 7,6 8,4 7
50 11,7 12,4 13 14,2 15,9 17 14,9 16,9 13,6 15,1 13,5 9,6 13,7 10,8 5,3 10,7 7,6 8,2 6,7
52 10,1 11 11,4 12,8 14,5 15,5 13,6 15,5 13,4 13,9 13,2 9,4 13,1 10,5 5,5 10,3 7,7 7,9 6,5
54 8,8 9,6 11,4 13 14 12,3 14,3 13,1 12,7 12,9 9,3 12,6 10,3 5,7 9,9 7,7 7,6 6,3
56 7,6 8,2 10 11,6 12,6 11 13 12,8 11,6 12,4 9,2 11,8 10,1 5,9 9,5 7,5 7,3 6
58 6,3 6,8 8,6 10,2 11,1 9,8 11,9 12,5 10,9 12 9,1 10,8 9,9 5,9 9 7,3 7,1 5,8
60 5,1 5,6 7,5 8,7 9,6 8,6 10,8 11,8 9,7 11,5 9 9,9 9,6 5,9 8,6 7,1 6,9 5,6
62 3,9 4,5 6,4 7,6 7,4 9,6 10,6 8,8 10,7 8,9 9 9,4 5,9 8,2 6,9 6,7 5,3
64 2,9 3,3 5,4 6,4 6,3 8,3 9,2 7,9 9,8 8,8 8,2 9,2 5,9 7,8 6,7 6,4 5,2
66 1,9 2,2 4,3 5,3 5,3 7,1 7,8 6,8 8,8 8,7 7,4 9 5,9 7,3 6,5 6,2 5
68 3,2 4,2 4,4 6 6,5 5,7 7,8 7,9 6,6 8,7 5,8 6,7 6,4 6 4,8
70 2,5 3,1 3,5 5 4,8 6,9 7,1 5,9 7,9 5,7 6 6,2 5,8 4,6
72 1,8 2,3 2,6 3,9 4 5,8 6,3 5,1 7 5,7 5,3 6,1 5,4 4,5
74 1,6 2,9 3,2 4,7 5,5 4,4 6,2 5,3 4,7 5,9 4,8 4,3
76 1,9 2,4 3,8 3,6 5,5 4,9 4,1 5,6 4,2 4
78 1,5 2,9 2,9 4,6 4,5 3,6 5 3,7 3,5
80 2 2,2 3,7 4 3 4,5 3,1 3
* Adapter ** Option

82 3 3,4 2,5 4 2,5 2,5


84 2,2 2 3,4 1,9 1,9
86 1,5 1,5 2,9 1,6 1,4
88 2,4
90 1,8

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
78,6m + 2,2m*

500 Tonne
Radius 6m** 14m 21m 28m 35m 42m
(m) 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º 40º 0º 20º
20 35
22 33 32 30,5 27,7
24 31,5 30,5 29,3 26,4 22
26 29,6 29,1 28,1 25,3 22,6 21 17
28 27,6 27,7 27 24,1 21,7 20,1 16,3 13,8 12,5
30 25,6 26,4 26 23,1 20,9 18,9 19,3 15,7 15,6 13,2 12,3
32 23,5 25 24,7 22,2 20,1 18,8 18,5 15,5 15 12,7 11,8
34 22 23,4 23,3 21,3 19,4 18,2 17,7 15,1 11,4 14,3 10,3 12,1 11,3
36 20,4 21,8 21,9 20,3 18,7 17,7 17 14,7 11,4 13,7 10 11,6 10,9
38 18,9 20,1 20,5 19,3 18 17,1 16,3 14,3 11,4 13,2 9,8 11,1 6,6 10,4
40 17,4 18,5 19 18,3 17,4 16,6 15,7 13,8 11,4 12,7 9,7 6,2 10,7 6,4 10
42 16,1 17,2 17,5 17,3 16,7 16,1 15,1 13,3 11,4 12,1 9,5 6,1 10,3 6,2 9,6 4,6
44 15 16 16,2 16,2 16 15,5 14,6 12,8 11,3 11,7 9,4 6 9,8 6 9,3 4,4
46 13,9 14,8 15 15,2 15,3 14,9 14 12,4 11,2 11,3 9,2 5,9 9,4 5,9 3,5 8,9 4,2

Crane
48 12,7 13,6 13,8 14,2 14,6 14,4 13,4 12 11,1 10,8 9 5,9 9,1 5,8 3,4 8,5 4,2
50 11,6 12,4 12,6 13,2 13,7 13,8 12,8 11,6 10,8 10,4 8,8 5,9 8,7 5,7 3,3 8,2 4,1
52 10,5 11,2 11,5 12,2 12,8 13,1 12 11,2 10,4 10 8,5 5,9 8,4 5,6 3,2 7,9 4
54 9,3 10 10,3 11,2 11,9 12,1 11,2 10,8 10,1 9,6 8,1 5,9 8,1 5,5 3,2 7,6 3,9
56 8,1 8,8 9,2 10,2 10,9 11,2 10,3 10,2 9,7 8,9 7,8 5,9 7,7 5,5 3,1 7,3 3,9
58 7 7,7 8 9,1 10 10,2 9,5 9,4 9,3 8,2 7,4 5,8 7,4 5,3 3,1 7 3,8
60 5,8 6,6 6,8 8 9 9,3 8,7 8,7 8,6 7,5 7,1 5,7 6,9 5,2 3,1 6,7 3,8
62 4,8 5,5 6,9 8 8,3 7,7 8 7,9 6,8 6,6 5,7 6,5 5 3 6,5 3,7
64 3,9 4,5 5,8 7 7,3 6,8 7,2 7,2 6,2 5,9 5,6 6 4,8 3 6,2 3,6
66 3 3,4 4,7 5,9 6,3 5,8 6,5 6,5 5,5 5,3 5,1 5,5 4,7 3 6 3,6
68 2,1 2,5 3,8 4,9 5,3 4,9 5,7 5,8 4,7 4,7 4,4 5,1 4,3 3 5,8 3,5
70 1,8 3,1 4 3,9 4,9 5,1 4 4 3,8 4,6 3,7 3 5,5 3,4
72 2,3 3,1 3 4,1 4,4 3,3 3,5 3,2 3,9 3,2 2,8 5,3 3,4
74 2,3 2,5 3,3 3,8 2,5 3 2,6 3,2 2,7 2,2 4,8 3,1
* Adapter ** Option

76 2 2,6 1,8 2,4 2 2,5 2,1 1,6 4,2 2,7


78 2,1 1,9 1,9 1,7 3,7 2,4
80 1,6 3 2,1
82 2,3 1,8
84 1,5 1,5

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES
Radius

Lifting capacities for lattice extension (hydraulic offset and luffing) — 165 t counterweight
16,1m + 4m* 26,5m + 4m*

500 Tonne
(m) 21 28 35 42 49 56 63 70 77 84 91 21 28 35 42 49 56 63 70 77 84 91
16 59
18 53
20 48,5 47,5 59
22 47,5 43,5 43 55
24 47,5 41 39,5 51 49
26 47 38,5 36,5 35,5 50 45,5 44
28 38 34,5 33,5 32 50 43 41,5
30 38 32,5 31 29,8 41,5 38,5 37
32 38 32 29,6 28 26,5 41,5 36,5 35 33
34 38 32 28,3 26,3 25 41,5 35 33,5 31,5
36 32 27,2 25,1 23,5 22,2 39 35 32 29,8 27,5
38 32 26,9 24 22,1 21 19,6 35 30,5 28,5 26,3 23,8
40 32 26,9 22,6 21,1 19,9 18,6 34 29,8 27,3 25,2 22,9
42 26,9 22,6 20,3 18,7 17,6 16,5 32 29,8 26,2 24,1 22,1 19,8
44 26,9 22,6 19,5 18 16,7 15,7 14,3 29,7 25,4 23,3 21,2 19,1

Crane
46 26,9 22,6 18,8 17,3 15,8 14,9 13,7 28,2 25,4 22,5 20,5 18,4 16,7
48 23,4 22,6 18,5 16,6 15,1 14,2 13,1 11,5 26,7 25,4 21,7 19,8 17,7 16,2 13,8
50 22,6 18,5 15,9 14,5 13,5 12,5 11,1 25,4 24,6 21,1 19,2 17,1 15,7 13,4
52 22,6 18,5 15,6 14 13 12 10,6 23,4 21,1 18,6 16,7 15,2 13,1 11,3
54 22,6 18,5 15,6 13,5 12,5 11,4 10,2 22,3 21,1 18 16,2 14,7 12,7 11,1
56 18,5 15,6 13 12 10,9 9,8 21,3 20,8 18 15,8 14,3 12,4 10,8
58 18,5 15,6 12,8 11,5 10,5 9,4 19,8 18 15,4 14 12,1 10,6
60 18,5 15,6 12,8 11,1 10,2 9 18,9 18 15 13,6 11,8 10,4
62 16,9 15,6 12,8 10,8 9,8 8,7 18,1 17,5 15 13,3 11,5 10,1
64 15,6 12,8 10,8 9,5 8,4 17,3 16,7 15 13 11,2 9,9
66 15,6 12,8 10,8 9,1 8 16 15 12,9 11 9,8
68 14,7 12,8 10,8 8,7 7,6 15,3 14,8 12,9 10,8 9,6
70 12,8 10,8 8,7 7,3 14,7 14,2 12,9 10,5 9,4
72 12,8 10,8 8,7 7 13,6 12,8 10,3 9,2
74 12,8 10,8 8,7 7 13 12,3 10,2 9
76 10,6 10,8 8,7 7 12,5 11,7 10 8,9
78 10,8 8,7 7 12 11,2 9,9 8,8
80 10,8 8,7 7 10,7 9,7 8,7
82 9,4 8,7 7 10,3 9,6 8,6
84 8,7 7 9,8 9,2 8,4
86 8,7 7 8,8 8,1
88 8,5 7 8,4 7,6
90 6,7 7 8 7,2
92 7 7,7 6,9
94 7 6,5
* Adapter

96 5,5 6,2
98 5,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES
Radius

Lifting capacities for lattice extension (hydraulic offset and luffing) — 165 t counterweight
36,9m + 4m* 47,3m + 4m*

500 Tonne
(m) 21 28 35 42 49 56 63 70 77 84 91 21 28 35 42 49 56 63 70 77 84 91
24 44,5
26 41 40
28 38,5 37 27,4
30 37 35 34 25,6 24,3
32 35,5 32,5 32 24,2 22,8
34 31,5 30 29,1 23 21,4 20,6
36 29,9 28,5 27,4 26,2 20,2 19,4 18,3
38 28,7 26,9 25,9 24,8 19,3 18,3 17,2
40 26,1 24,6 23,5 22 18,6 17,3 16,3 15,1
42 25,4 23,4 22,3 21 19,4 18 16,4 15,4 14,2
44 24,7 22,6 21,2 20 18,5 15,8 14,6 13,4 12
46 24 21,9 20,2 19 17,7 16,1 15,2 13,8 12,7 11,4 10,1
48 21,3 19,2 18,1 16,9 15,4 14,1 14,6 13,2 12 10,7 9,5
50 20,7 18,7 17,3 16,1 14,8 13,6 12,9 11,4 10,1 8,9 7,7
52 20,1 18,3 16,5 15,4 14,2 13,1 11,8 12,6 10,8 9,6 8,4 7,1 6,3

Crane
54 17,9 16 14,7 13,6 12,6 11,4 12,3 10,4 9,1 7,8 6,6 5,9
56 17,5 15,5 14 12,9 12,1 11 9,4 11,9 10 8,5 7,3 6 5,5 4,7
58 17,1 15 13,3 12,3 11,6 10,7 9,1 9,6 8 6,7 5,3 5,1 4,4 3,5
60 16,7 14,6 12,8 11,7 11,1 10,3 8,8 9,2 7,7 6,1 5 4,6 4,1 3,2
62 14,2 12,5 11,1 10,5 10 8,5 8,9 7,5 5,6 4,6 4,2 3,7 2,9
64 13,8 12,3 10,6 10 9,5 8,2 7,2 5,4 4,3 3,9 3,4 2,6
66 13,4 12 10,2 9,4 9,1 7,9 7 5,2 4 3,6 3,1 2,3
68 11,7 9,9 8,9 8,5 7,5 6,8 5 3,7 3,3 2,9 2,1
70 11,4 9,6 8,5 8 7 6,6 4,8 3,6 3,1 2,6 1,8
72 11,2 9,3 8,3 7,5 6,5 4,6 3,5 2,8 2,4 1,6
74 11 9,1 8 7,1 6 4,4 3,4 2,7 2,2 1,4
76 8,8 7,8 6,9 5,6 4,2 3,3 2,5 1,9 1,1
78 8,5 7,7 6,6 5,2 3,2 2,4 1,7
80 8,3 7,5 6,4 4,8 3,1 2,3 1,6
82 7,3 6,2 4,7 3 2,2 1,6
84 7,1 6 4,6 2,9 2,1 1,5
86 7 5,8 4,5 2 1,4
88 6,8 5,6 4,4 1,9 1,4
90 5,4 4,3 1,8 1,3
92 5,2 4,2 1,2
94 5 4,1 1,2
96 4 1,1
* Adapter

98 3,9 1
100 3,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 56m — 165 t counterweight
Radius 57,7m + 4m* 68,1m + 4m* 78,6m + 4m*

500 Tonne
(m) 21 28 35 42 49 56 63 70 21 28 35 42 49 21 28
30 17
32 15,9
34 14,9 13,4 8,5
36 14 12,5 7,8
38 11,7 10,8 7,2 5,3 2,9
40 11 10,1 9 6,6 4,9 4,2 2,7
42 10,4 9,4 8,4 4,6 3,9 2,5 1,3
44 9,8 8,8 7,7 6,5 4,3 3,6 2,8 1,1
46 8,3 7,2 5,9 4,5 4 3,4 2,6 1
48 7,8 6,6 5,3 4,2 3,1 2,4 1,5
50 7,4 6,1 4,9 3,9 3 2,9 2,1 1,3
52 5,9 4,6 3,6 2,7 2,8 2 1,1
54 5,6 4,4 3,4 2,5 1,6 2,6 1,8 1
56 5,3 4,1 3,1 2,2 1,4 1,7

Crane
58 5,1 4 2,9 2 1,2 1,5
60 3,8 2,7 1,8 1 1,4
62 3,6 2,5 1,6
64 3,5 2,4 1,4
66 2,3 1,2
68 2,1 1,1
* Adapter

70 2 1
72 1,9

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES
Radius

Lifting capacities for lattice extension (hydraulic offset and luffing) — 165 t counterweight
16,1m + 4m* 26,5m + 4m*

500 Tonne
(m) 21 28 35 42 49 56 63 70 77 84 91 21 28 35 42 49 56 63 70 77 84 91
22 45
24 41,5
26 39,5 38 49
28 39,5 35,5 46
30 33,5 32,5 43 41,5
32 32 30 41,5 38,5
34 32 28,8 27,4 36,5 35,5
36 32 27,6 26 35 33,5
38 26,8 24,8 23,5 33,5 31,5 30,5
40 26,8 23,6 22,2 31,5 30 28,9
42 26,8 23,4 21,2 19,8 29 27,9 26,2
44 23,4 20,4 18,7 27,4 26,8 24,9
46 23,4 19,6 17,9 16,7 26 25,4 23,7 22,3
48 23,4 19,1 17,2 15,8 24,1 23,1 21,3
50 23,4 19,1 16,6 15 14,1 22,9 22 20,3 18,9

Crane
52 19,1 16 14,5 13,3 21,7 20,9 19,8 18,2
54 19,1 15,8 14 12,6 12,2 20,7 19,9 19,3 17,5 16
56 19,1 15,8 13,5 12 11,6 19 18,4 17 15,4
58 15,8 13 11,6 11 10,4 18,1 17,5 16,5 14,9 13,8
60 15,8 12,8 11,2 10,4 9,9 17,3 16,7 16 14,4 13,4
62 15,8 12,8 10,8 10,1 9,3 8,4 15,9 15,3 14 12,9 11,8
64 15,8 12,8 10,4 9,7 8,8 7,9 15,2 14,5 13,6 12,5 11,5
66 12,8 10,2 9,2 8,4 7,4 14,5 13,9 13,2 12 11,1 9,6
68 12,8 10,2 8,8 8,1 7 13,9 13,2 12,7 11,6 10,8 9,4
70 12,8 10,2 8,6 7,8 6,7 12,7 12,2 11,1 10,4 9,1
72 10,2 8,6 7,5 6,4 12,1 11,6 10,8 10 8,8
74 10,2 8,6 7,1 6,1 11,6 11,1 10,3 9,6 8,5
76 10,2 8,6 6,8 5,8 10,6 9,8 9,1 8,2
78 10,2 8,6 6,7 5,6 10,1 9,3 8,6 7,8
80 8,6 6,7 5,3 9,6 8,8 8,1 7,4
82 8,6 6,7 5 9,2 8,4 7,7 6,9
84 8,6 6,7 4,8 8 7,3 6,4
86 6,7 4,6 7,6 6,8 6
88 6,7 4,6 7,2 6,5 5,6
90 6,7 4,6 6,1 5,2
92 6,7 4,6 5,7 5
94 4,6 5,4 4,7
* Adapter

96 4,6 5,1 4,5


98 4,6 4,3
100 4,1

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

LIEBHERR LTM1500
FLY JIB DUTIES

Lifting capacities for lattice extension (hydraulic offset and luffing) — 165 t counterweight
Radius

47,3m
36,9m + 4m* 47,3m + 4m* 47,3m + 4m*

500 Tonne
+ 4m*
(m) 21 28 35 42 49 56 63 70 77 84 91 21 28 35 42 49 56 63 70 21 28 35 42 21
32 30,5
34 28,7
36 27,1 26 17,1
38 24,4 15,9
40 23 22,6 14,8 13,7
42 22 21,3 12,8 8,1
44 21,1 20,1 19,4 11,9 11,4 7,4
46 19,1 18,3 11,1 10,6 5,1 2,3
48 18,4 17,4 16,5 10,5 9,9 9 4,7 2
50 17,7 16,5 15,6 9,2 8,3 4,4 3,8
52 15,7 14,8 13,7 8,7 7,7 6,6 4,1 3,5
54 15,2 14,1 12,9 8,2 7,2 6,1 3,2 2,5
56 14,8 13,3 12,2 11,4 6,6 5,6 4,4 3 2,3
58 14,4 12,8 11,6 10,7 6,2 5,1 4 2,8 2
60 12,4 10,9 10,1 9,2 5,8 4,7 3,7 2,9 1,8

Crane
62 12,1 10,3 9,5 8,5 5,5 4,4 3,4 2,6 1,6
64 11,7 9,9 8,9 8 7,5 4,2 3,2 2,3 1,5 1,5
66 9,6 8,4 7,4 7 4 2,9 2,1 1,3 1,3
68 9,3 8 6,9 6,4 5,9 3,8 2,7 1,8 1,1
70 9 7,7 6,4 6 5,4 2,5 1,6
72 8,7 7,4 5,9 5,6 4,9 4,2 2,3 1,4
74 7,1 5,6 5,2 4,6 3,9 2,2 1,3
76 6,9 5,4 4,8 4,3 3,6 2 1,2
78 6,6 5,2 4,5 4 3,3 1
80 5,1 4,2 3,8 3
82 4,9 4,1 3,5 2,8
84 4,7 4 3,3 2,5
86 4,5 3,8 3,1 2,3
88 3,7 2,9 2,1
90 3,6 2,8 1,9
92 3,5 2,7 1,8
94 2,6 1,6
96 2,5 1,4
* Adapter

98 2,5 1,3
100 2,4 1,2
104 1,2

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TOWER
KING LIFTING CRANES
King Lifting has intergrated into
its fleet the new folding tower
cranes. This type of tower crane
is able to tackle lifts in urban
areas with confined sites
and the associated phased
developments.
Available in both mobile and pedestrian
operated/self erecting types. Our experience
survey teams are available to offer
consultation and advise on this type of lift.

Greater functionality than


traditional tower and mobile cranes
18min erection time for
Spierings mobile crane

Reduced need for road closures,


site and neighbourhood disruptions

Potain IGO range of pedestrian


operated tower cranes

Spierings range of mobile


tower cranes

Tower crane erection services

Full 3D CAD planning /


feasibility studies

'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'


KING LIFTING LIMITED
HEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 599-AT5
DIMENSIONS

9 Tonne
Crane

Vehicle weight 60,000kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 599-AT5

9 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 599-AT5

9 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 599-AT5

9 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 599-AT5

9 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 1265-AT6
DIMENSIONS

10 Tonne
Tower Crane

Vehicle weight 60,000kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 1265-AT6

10 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 1265-AT6

10 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 1265-AT6

10 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7
DIMENSIONS

18 Tonne
Tower Crane

Vehicle weight 84,000kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7
NORMAL WORKING DUTIES

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7
INCREASED CAPACITY / REDUCED WORKING SPEED DUTIES

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SPIERINGS SK 2400-AT7

18 Tonne
Tower Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

sPECIALISED
KING LIFTING EQUIPMENT
King Lifting can provide
specialised solutions for your
installations and lifting problems.

KING LIFTING
Versa Lifts
Can move large machine tools
quickly without removing guards,
cutting costly downtime.

KING LIFTING
Power Lift Gantry Systems
Enabling the movement of
machinery with restricted headroom.

Compact Cranes
A new technology at only 750mm
KING LIFTING

wide able to enter a premises


through a doorway then lift 2.82t,
with a max radius of 8.2m and
height 8.7m.

KING LIFTING
Mini Crawler Cranes
With full 360° rotation, pick and
carry duties and almost no
tail-swing these tracked cranes
are ideal for urban, small scale and
phased developments.

KING LIFTING
Lifting Equipment
King Lifting have a range lifting
equipment for hire, including
modular lifting beams upto 100t
capacity, manbaskets, boat slings,
outriggermats etc.

'big enough to cope, small enough to care'


KING LIFTING Limited
Head Office: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk Depots aCROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

PLANT AND
KING LIFTING
MACHINERY
MOVEMENT
King Lifting are focused on
delivering safe, practical and
efficient solutions to all of your
plant and machinery moving
requirements, allowing you to
keep any down time and other
inconveniences to an absolute
minimum.
Our team consists of skilled labour who
have access to the latest specialised
handling equipment including Versalifts,
Compact Cranes, Powerlift Gantry Systems
and our own fleet of Mobile Cranes.

Single machine moves


Factory removals
Internal relocations
Mechanical and
Electrical Installations
Contract Lifts
Lorry loader and specialist transport

'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'


KING LIFTING LIMITED
HEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MAEDA COMPACT CRANE


DIMENSIONS

Vehicle weight 1900kg


3 Tonne
Crane

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MAEDA COMPACT CRANE


MAIN BOOM

Main Boom
Radius Total rated load (kg)
(m) (outriggers at maximum position)

4,075 5,575 7,075 8,575


Boom Boom Boom Boom

3 Tonne
<4,0 550
<3,6 820
<3,0 1220
<1,4 2820 WORKING RANGE CHART
1,5 2520
2,0 1920
2,5 1570
3,0 1220
3,5 970 970
3,705 920
4,0 780 740
4,5 630 580 400

Crane
5,0 530 480 340
5,205 530
5,5 430 300
6,0 380 270
6,5 350 230
6,705 330
7,0 200
7,5 180
8,0 150
The working range chart applies to cases without load
8,205 150
and does not include boom deflections.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CATERPILLAR VC60E
DIMENSIONS
Forklift at 500mm Gas Powered

3000 KG
Equipment

TECHNICAL SPECIFICATION

Capacity 3000kg
Weight 4576kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CATERPILLAR VC110F
DIMENSIONS
Forklift at 500mm Gas Powered

5000 KG
Equipment
FORKLIFT CRANE ARM ATTACHMENT TECHNICAL SPECIFICATION

Capacity 5000kg
Weight unladen 7,200kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MITSUBISHI FGC55K
DIMENSIONS
Forklift at 600mm LP Gas Powered

5500 KG
4125
2120
2840

1200

1220

Equipment
4130
1200

TECHNICAL SPECIFICATION

Capacity 5500kg
Weight 7200kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

CATERPILLAR T150D
DIMENSIONS
Forklift at 600mm Gas Powered

6050 KG
Equipment
TECHNICAL SPECIFICATION

Capacity 6050kg/600mm
Weight unladen 9,800kg

LOW BED TRAILER

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

HYSTER SPACESAVER S7.00XL


DIMENSIONS
Forklift at 600mm

7000 KG
Equipment
TECHNICAL SPECIFICATION

Capacity 7000kg
Weight unladen 9265kg

LOAD CENTRE
Distance from front of forks
to centre of gravity of load.
RATED LOAD
Based on vertical masts as
shown left.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

VERSA-LIFT 25/35
DIMENSIONS
Forklift at 610mm extended ballast

15880 KG
Equipment
TECHNICAL SPECIFICATION

Capacity Retracted 11,350kg/610mm


Extended 15,880kg/610mm
Gradient Empty 38%
Loaded 17%
Tilt Forward 11°
Backward 6°
Weights Total 15,650kg
Boom 1,360kgs
Counterweight 2,720kg
Forks 680kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

VERSA-LIFT 25/35
25/35 VERSA-LIFT WITH 3 COUNTERWEIGHTS

Slab Weight (kg) Number of Slabs Standard Wheel Base (mm)


880 3 1930

Lifting Capacities w/Forks Only (kgs)


Counterweight Extensions (mm)

15880 KG
0 300 600 900
Load
Center 600 11100 12800 14600 16300
From 900 8900 10300 11700 13000
Fork Face 1200 7400 8600 9700 10900
(mm)
1500 6300 7300 8300 9300
1800 5600 6400 7300 8100
2100 4900 5700 6500 7200

Lifting Capacities w/Boom Only (kgs)


Counterweight Extensions (mm)
0 300 600 900
Load
Center 300 10700 12400 14200 15900
From 600 8600 9900 11300 12700
Boom 900 7100 8300 9400 10600

Equipment
Face
(mm) 1200 6100 7100 8100 9100
1500 5400 6200 7100 7900
1800 4800 5500 6300 7100
2100 4300 5000 5700 6400
2400 3900 4500 5200 5800

Lifting Capacities w/Fork and Boom (kgs)


Counterweight Extensions (mm)
0 300 600 900
Load
Center 600 8100 9500 10900 12300
From 900 6800 7900 9100 10200
Boom 1200 5800 6800 7800 8800
Face
(mm) 1500 5100 5900 6800 7700
1800 4500 5300 6100 6800
2100 4100 4800 5400 6100
2400 3700 4300 5000 5600

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

VERSA-LIFT 40/60
DIMENSIONS
Forklift at 915mm extended ballast

27300 KG
Equipment
TECHNICAL SPECIFICATION

Capacity Retracted 18t/915mm Drawbar Pull Empty 6,216kgs


Extended 27t/915mm Loaded 5,400kgs
Gradient Empty 47% Axle Weights Steer Empty 14,065kg
Loaded 20% Drive Empty 12,250kg
Tilt Forward 12° Steer Loaded 2,722kg
Backward 7° Drive Loaded 50,817kg
Weights Total 26,315kg
Boom 2,722kgs
Counterweight 7,260kg
Forks 1361kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

VERSA-LIFT 40/60
40/60 VERSA-LIFT WITH 3 COUNTERWEIGHTS

Slab Weight (kg) Number of Slabs Wheel Base (mm)


1700 4 2490

Lifting Capacities w/Forks Only (kgs)


Counterweight Extensions (mm)

27300 KG
0 300 600 900 1200
Load Center
From 900 18900 21000 23100 25200 27300
Fork Face 1200 15800 17500 19300 21100 22900
(mm) 1500 13600 15100 16600 18100 19600
1800 11900 13200 14600 15900 17200
2100 10600 11800 13000 14100 15300

Lifting Capacities w/Boom Only (kgs)


Counterweight Extensions (mm)
0 300 600 900 1200
600 18000 20000 22100 24200 26300
900 15100 16800 18600 20300 22000
1200 13000 14500 16000 17500 19000
Load Center 1500 11400 12700 14100 15400 16700
From

Equipment
Fork Face 1800 10200 11300 12500 13700 14900
(mm) 2000 9700 10700 11900 13000 14100
2100 9200 10200 11300 12300 13400
2300 8800 9700 10700 11800 12800
2400 8300 9300 10300 11200 12200
2600 8000 8900 9800 10800 11700
2700 7700 8600 9400 10300 11200
2900 7400 8200 9100 9900 10800
3000 7100 7300* 7300* 7300* 7300*

Lifting Capacities w/Forks and Boom Only (kgs)


Counterweight Extensions (mm)
0 300 600 900 1200
Load Center
From 600 17400 19500 21500 23600 25700
Fork Face 900 14600 16300 18000 19800 21500
(mm) 1200 12600 14100 15600 17000 18500
1500 11000 12300 13600 15000 16300
1800 9800 11000 12200 13300 14500

*** All load Capacities are Rated with the Mast Vertical.
*** Regions Marked by an * are Limited by Structural Limitations.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

POWER LIFT SYSTEM


DIMENSIONS

100 Tonne
Equipment

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TRANSPORT
KING LIFTING King Lifting Limited is one of
the country’s leading companies
specialising in Crane Hire,
Machinery Installation and
Removal and Transport.
Our Low loader, Semi-low loader and flat
bed vehicles, together with our fleet of
lorry loader cranes are all operated by
trained and fully competent personnel.
We can lift, shift and transport your loads
to any part of the UK or Europe, safety
and securely.

KING LIFTING
Abnormal loads

Lorry loaders to 16t capacity


KING LIFTING

Low loaders to 150t capacity


KING LIFTING

Tautliner transport
KING LIFTING

'big enough to cope, small enough to care'


KING LIFTING Limited
Head Office: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk Depots aCROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

THE QUICK GUIDE TO NOTIFICATION


ATTENDANT & MARKER REQUIREMENTS

NOTIFY NOTIFY
MEASUREMENTS POLICE HIGHWAYS ATTENDANT MARKERS

WIDTH
OVER 2.9m (9’ 6”) YES NO NO YES

Guide
OVER 305mm (1’ 00”) either YES NO NO YES
side of Vehicle (See Note 2)
OVER 3.5m (11’ 6”) YES NO YES YES
OVER 5m (16’ 5”) YES NO YES YES
VR1 required from DOT

OVER 6.1m (20’ 0”) YES NO YES YES


Special Order required from DOT

LENGTH
OVER 18.65M (61’ 2”) Rigid YES NO YES NO
STGO 18.3m Rigid (See Note 4)
1
OVER 27.4m (89’ 10 /4”) Rigid YES NO YES NO
Special Order required from DOT
COMBINATION OVER 25.9m YES NO YES NO

Transport
(84’ 111/4”) Tractor and Trailer(s)

PROJECTIONS - REAR
OVER 1m (3’ 3”) NO NO NO NO (Make clearly visable)

OVER 2m (6’ 6”) NO NO NO YES (End)


OVER 3.05m (10’ 0”) YES NO YES YES (End and side)
OVER 5m (16’ 5”) Markers not YES NO YES YES (End and both sides)
more than 3.5m (11’ 6”) apart

PROJECTIONS - FRONT
OVER 2m (6’ 6”) NO NO YES YES (End and side)
OVER 3.05m (10’ 0”) YES NO YES YES (End and side)
OVER 4.5m (14’ 9”) YES NO YES YES (End and both sides)

WIDTH MAXIMUM SPEED


OVER C & U 10,170kgs (Axle) NO YES NO N/A
OVER 41,000kgs NO YES NO N/A
(See Note 6)
OVER 41,000kgs NO YES NO N/A
but not over 46,000kgs (CAT 1)
OVER 46,000kgs NO YES NO (1) 40MPH
but not over 80,000kgs (CAT 2) (2) 35MPH
maximum axle weight 12,500kgs
(See Note 5)
OVER 80,000kgs YES YES NO (1) 30MPH
but not over 150,000kgs (CAT 3) (2) 25MPH
(3) 20MPH
(4) 12MPH

OVER 150,000kgs at CAT 3 YES YES NO VARIOUS


but Special Order required
from DOT

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MAN TGX 26.540 6X4 BBS


DIMENSIONS

150 Tonne
Transport

TECHNICAL SPECIFICATION

Vehicle weight 10.200kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MAN TGX 26.540 6X4 BBS


DIMENSIONS

150 Tonne
Transport

TECHNICAL SPECIFICATION

Vehicle weight 10.200kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MAN TGX 33.480 6X4 BBS


DIMENSIONS

150 Tonne
Transport

TECHNICAL SPECIFICATION

Vehicle weight 10.200kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MAN TGX 26.480 6X4 BLS


DIMENSIONS

90 Tonne
Transport

TECHNICAL SPECIFICATION

Vehicle weight 10.200kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SCANIA RIGID 8X4 + FASSI CRANE


S660A
DIMENSIONS

10.2 Tonne
Transport
TECHNICAL SPECIFICATION

Max. lifting capacity 16000kg @ 3.4m 3100kg @ 16.1m


Max. hydraulic outreach 16.1m
Slewing angle 400 ° continous
Stabilizer spread 8880mm

Solo with Drag Trailer

Vehicle weight 21,780kg 26,200kg

Max payload 10,220kg 17,800kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SCANIA RIGID 8X4 + FASSI CRANE


S660A
LORRY LOADER DUTIES (INCLUDING WINCH)

10.2 Tonne
Transport

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SCANIA RIGID 8X4 + FASSI CRANE


S660A
LORRY LOADER DUTIES (INCLUDING WINCH)

10.2 Tonne
Transport

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SCANIA RIGID 8X4 + FASSI CRANE


S660A
LORRY LOADER DUTIES (HOOK)

10.2 Tonne
Transport

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SCANIA RIGID 8X4 + PALFINGER CRANE


35000B
DIMENSIONS

14.0 Tonne
Transport
TECHNICAL SPECIFICATION

Max. lifting capacity 25358lbs 112.8 kN/11500kg at 9’2” 2.80m


Max. hydraulic outreach 62’8” 19.1m
Slewing angle 400 ° continous
Stabilizer spread 19’8” 6.0m

Solo with Drag Trailer

Vehicle weight 17,750kg 22,170kg

Max payload 14,000kg 21,830kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SCANIA RIGID 8X4 + PALFINGER CRANE


35000B
LORRY LOADER DUTIES (HOOK)

14.0 Tonne
Transport
MAX. LIFTING CAPACITIES

Outreach Capacity
Hydraulic
4.3m 7600kg 14’ 1” 16758lbs
6.1m 5310kg 20’ 11708lbs
8.1m 3960kg 26’ 7” 8732lbs
10.2m 3960kg 33’ 6” 6923lbs

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SCANIA RIGID 8X4 + PALFINGER CRANE


35000B
LORRY LOADER DUTIES (HOOK)

14.0 Tonne
Transport

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

DAF FTG85CF 380 RIGID 6X4 +


ATLAS CRANE
DIMENSIONS

11 Tonne
Transport

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MERCEDES ATTEGO 815 RIGID FLATBED


WITH SIDE BOARDS
DIMENSIONS

3.0 Tonne
Transport

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

ARB SEMI-LOW-LOADER TRI-AXLE


DIMENSIONS
Extendable Tri-axle Semi Low-Loader

KING 01
Transport
TECHNICAL SPECIFICATION

Overall length 13600 - 18080mm


Overall width 2550mm
King pin 1250mm

Trailer weight 13,700kg

Payload Subject to Unit

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

KING 6 AXLE BALLAST TRAILER


DIMENSIONS
Flat Platform Ballast Trailers 6 Axles

KING 02
TECHNICAL SPECIFICATION

Transport
Overall length 17000mm
Overall width 2550mm
King pin 1900mm

Vehicle weight 17800kg

Payload Subject to Unit

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

KING 6 AXLE BALLAST TRAILER


DIMENSIONS
Flat Platform Ballast Trailers 6 Axles

KING 04
TECHNICAL SPECIFICATION

Transport
Overall length 17000mm
Overall width 2550mm
King pin 1900mm

Vehicle weight 17800kg

Payload Subject to Unit

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

SDC 13.7M - 21.3M TRI-AXLE


FLATBED EXTENDABLE
DIMENSIONS
Flat Bed Trailer Extendable

KING 05
TECHNICAL SPECIFICATION

Transport
Overall length 13,700 - 21,300mm
Overall width 2.560mm
King pin 1,500mm

Trailer weight 7920kg

Payload Subject to Unit

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

OVERLANDER TPT36E EUROLINER


13.5M TRI-AXLE
DIMENSIONS

KING 06
Transport
TECHNICAL SPECIFICATION

Overall length 1350mm


Overall width 2510mm
King pin 1670mm

Trailer weight 7800kg

Payload Subject to Unit

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MCCAULEY C279917 TRI-AXLE DRAG


TRAILER
DIMENSIONS

KING 08
Transport
Vehicle weight 4420kg

Max payload (design) 25,000kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

MCCAULEY C281241 TRI-AXLE DRAG


TRAILER
DIMENSIONS

KING 09
Transport
Vehicle weight 4420kg

Max payload (design) 25,000kg

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

KING 5 AXLE BALLAST TRAILER


DIMENSIONS

KING 10
Transport
PLATING DATA
Gross Trailer Weight Design 93,000 kgs
Gross Combination Weight Under UK Ballast Regs 93,000 kgs
Max Axle Load Design (at 20kph/12mph) 15,000 kgs
Max Axle Load (AIR) Design (at 40kph/25mph) 13,200 kgs
Max Axle Load (AIR) Design (at 65kph/40mph) 12,590 kgs
Max Kingpin Imposed Design 25,000 kgs
Overall Length 15,500 kgs
Overall Width 2,550 kgs
Kingpin Location 1,600 kgs
Coupling Height to suit Unladen 1,370 kgs
Deck Height over Bogie Ctr Unladen (+/- 100mm) 1,600mm

CHASSIS
Twin I beam main rails converging to single centre
spine mainframe. 235mm deep ISO neck profile.
12mm thick pick-up plate with an angled leading
edge, re-enforcing channels. Cross members at
approx 600mm pitch. 200mm x 75mm x 23mm
PFC channel side raves and steel section bolted
side guards anti-under run bumper.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

NOOTEBOOM 5 AXLE PLANT TRAILER


DIMENSIONS
MCO-85-05V

KING 11
Transport
(DESIGN) WEIGHTS Exc. options, at a max. speed of:
(in tonnes) GBmax DE EC
80 km/h 60 km/h 50 km/h 40 km/h 30 km/h 20 km/h Cat 3 (§70) (40 t)
Max. fifth wheel 25,0 26,0 27,0 28,3 31,3 32,3 32,3 25,0 25,0
Max. axlebogie 56,0 56,7 57,7 62,7 68,1 77,4 77,4 50,0
Max. gross (GVW) 81,0 82,7 84,7 91,0 99,4 109,7 109,7 75,0 ~ 33
Dead-weight, app. 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5
Net payload, app. 65,5 67,2 69,2 75,5 83,9 94,2 94,2 59,5 17,5

CHASSIS GOOSENECK
Chassis out of a telescopic central box-section Suitable for 4x2, 6x2, 6x4 and short 8x4 tractors.
mainmember and hotrolled sideraves (UNP-200 The rear of the neck has a beavertail.
in lowbed), interconnected by strong pressed
crossmembers. Extension spine precambered to
reduce the sag in empty extended position. The
chassis is extremely torsion-rigid and therefore very
stable for high centre of gravity loads.

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

BROSHUIS 5 AXLE BALLAST TRAILER


DIMENSIONS

KING 12
Transport

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

TRAINING
KING LIFTING The importance of competent
trained staff is critical to the
safety of any lifting operation.
King Lifting is a CPCS
Construction Plant Competence
Scheme registered Test Centre.
We provide Training, Testing, Plant
Renewals at our school in Avonmouth.
We use experienced instructors from the
industry to provide quality training.

Courses available:

Appointed persons (lifting operations)


Crane supervisor (lifting operations)
Slinger signaller
Mobile crane
Compact crane
Lorry loader
MEWPs (scissor and boom)
Industrial forkllift

To enrol or for more information


call: 01179821121 or
email: training@kinglifting.co.uk

'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'


KING LIFTING LIMITED
HEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

COMPUTER
KING LIFTING AIDED DESIGN
To further our range of services
to our customers we have added
the CAD department.
This can offer a service from Basic Site Lift
Plans to assist with the requirements of the
Health & Safety Executive and BS:7121
to full 3D Feasibility Modelling of your
lifting projects.

Basic Lift Plans


Assistance with HSE and
BS:7121 Compliance

Full 2D and 3D Modelling Feasibility


and Real-time Visualisations

AutoCAD® Computer Aided


Design Software

CraniMAX CRANIMATION®
Crane Manager software

Out-Rigger Loadings and Ground


pressures accurately calculated

'BIG ENOUGH TO COPE, SMALL ENOUGH TO CARE'


KING LIFTING LIMITED
HEAD OFFICE: King Road Avenue Avonmouth Bristol BS11 9HF
Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk DEPOTS ACROSS THE UK
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

NOTES

The charts that have been included have been reproduced from manufacturer specifications, and while every
effort has been made to ensure their accuracy, we do not accept any responsibility for errors or omissions.
KING LIFTING We also need to draw your attention to the guidance notes on page iv to assist you with your crane selection. www.kinglifting.co.uk
PREVIOUS PAGE CONTENTS PAGE NEXT PAGE

HEAD OFFICE: King Road Avenue, Avonmouth, Bristol BS11 9HF


KING LIFTING Tel: 01179 821121 Fax: 01179 826244 Web: www.kinglifting.co.uk

You might also like