Professional Documents
Culture Documents
TABLE OF CONTENTS
I. BACKGROUND
II. AITECH COMMITTEE MEMBERS AGENCIES
III. OBJECTIVES OF THE AITECH INTER-AGENCY COMMITTEE
IV. SCOPE OF WORK AND FUNCTIONS OF THE AITECH INTER-
AGENCY COMMITTEE
V. ROLES AND RESPONSIBILITIES OF PARTICIPATING AGENCIES
VI. DEFINITION OF TECHNOLOGY
VII. CRITERIA FOR ACCREDITATION
VIII. STEPS IN ACCREDITATION
IX. PROCESS FLOW CHART
X. CHECKLIST OF REQUIREMENTS FOR ACCREDITATION
A. Building System
B. Material Only
XI. CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES
APPLIED FOR AITECH ACCREDITATION
XII. SCHEDULE OF FEES
XIII. LIST OF ACCREDITED TECHNOLOGIES
The AITECH Committee acts as a review and approving body for applications
for accreditation of innovative technologies appropriate for housing. Its main
objective is to assist producers of innovative technologies in securing
acceptance of their products or systems in the market as well as to make these
technologies acceptable for funding under government housing loan programs.
The Committee also aims to encourage and promote the use of innovative
technologies as an alternative to traditional housing construction system; and
to develop standards, guidelines, and procedures for accreditation system.
If documents are
complete
BUILDING SYSTEM
Note: All documents should be submitted in three (3) sets except for sample technology
2. Fire Rating
One (1) hour fire resistant 5%
Above 1 hour fire resistive rating 10%
3. Moisture
Non-Resistant 0%
Resistant 10%
4. Economic Lifespan
Below 5 yrs fail
5 to 20 yrs 5%
21 to 34 yrs 8%
35 years above 10%
6. Green Component
With component 0%
Without Component 10%
FORMS/PAINT/SOIL STABILIZERS
I. Performance Specs
Adaptability to other Technologies
Non-Adaptable 0%
Adaptable 10%
*20 units is defined as the number of housing units considered as mass housing
I. Performance Specs
1.1 Material Strength
Tensile Strength
Below 15 MPa 5%
15MPa and above 15%
V. Units Completed
0 0%
Below 20 units * 10%
Above 20 units 20%
*20 units is defined as the number of housing units considered as mass housing
REALM HOMEBUILDERS
Permaforms
Permaforms is a system that has a main component of double panel boards (Fiber
Cement Board) and is adhesively separated by an adaptor that are glued at its inner
surface. The adaptor is glued at pattern that would allow the flow of concrete inside
the panel. This is in replacement or a better alternative than a conventional concrete
hollow block wall or masonry wall. Concrete in-fill & reinforcement (by others) may
vary depending on the design requirements by structural.
T: 717-5500
EVOVENTUR INC.
Evo Besta Board & Evo Autoclaved Lightweight Concrete (ALC) Panel
EVO Wall System, which maybe composed of EVO Besta Board with Autoclaved
Lighweight Concrete (ALC) as the infill materials, are established building materials
which are durable, sustainable amd multipurpose, and had been tried and tested in
different construction scenarios from all over the world. The EVO Besta Board is a
mineral based modern green building material that is versatile and outperforms
traditional products such as wood boards, gypsum, and cement based products. It
can be used as exterior and cladding and sheathing, decorative board and fencing. It
comes in various thickness with recessed edges profile.
AITECH MANUAL 2017 Wall Panel Contact Person: Mr. Reynaldo A. Monzon, Pres./Gen. Man.
Page 28 Arch. Jasper Mortiga, Technical Manager
T# 442-2681 to 90 / 932-7210 loc. 350
LEXUS INDUSTRIAL ENTERPRISE CORPORATION
PPS Building Technology
An advanced System for industrial building utilizing fabricated, post-tensioned
modular elements, this system has been in use since 1955 worldwide on mass
housing, multi-storey residential blocks projects and schools etc (2.5M square meters
of projects to date) the system is fast (5-7 days per floor); economical (20-30% less
materials used); cost effective (lighter structure more efficient foundation design plus
lower material consumption=lower cost); safe (designed for Zone 4 seismic zones;
Category 5 Super-typhoons of more than 24KMP wind.
SOIL STABILIZER