This document describes a 21⁄2" straight pattern brass gate valve with a non-rising stem and swivel inlet. It has a brass body and trim, with a red speed handle and pin lug swivel inlet connecting to a male hose thread outlet. The valve is made of brass, has a non-rising brass stem, and is rated for 175 PSI water up to 70 degrees F.
This document describes a 21⁄2" straight pattern brass gate valve with a non-rising stem and swivel inlet. It has a brass body and trim, with a red speed handle and pin lug swivel inlet connecting to a male hose thread outlet. The valve is made of brass, has a non-rising brass stem, and is rated for 175 PSI water up to 70 degrees F.
This document describes a 21⁄2" straight pattern brass gate valve with a non-rising stem and swivel inlet. It has a brass body and trim, with a red speed handle and pin lug swivel inlet connecting to a male hose thread outlet. The valve is made of brass, has a non-rising brass stem, and is rated for 175 PSI water up to 70 degrees F.
2½" Straight Pattern Brass Gate Valve with non-rising stem and swivel
inlet.
• Valve is made up of a Brass body and Brass trim
• Red speed handle and pin lug swivel on the inlet and male hose thread on the outlet.
FINISH: Cast Brass
Item Hose Gate Valve
Size 2-1/2 Connection Female NST x Male NST Material of Construction Brass Top of Handle to Inlet Center 8" Inlet to Outlet Length 5" Rated For 175 PSI Water Max. Temp. 70 Degrees F Stem Non-Rising Stem Material Brass Handwheel Aluminum