The document describes the specifications for a 30 kg washer extractor. It shall be high spin, suspended, soft mount, heavy duty, and computer controlled. Key features include a stainless steel drum and basket, heavy duty suspension system, large capacity computer PLC for multiple cycles, precision water level sensor, and sound level under 75dB. The washer extractor has pneumatic controls and a 7.5HP variable frequency drive motor.
The document describes the specifications for a 30 kg washer extractor. It shall be high spin, suspended, soft mount, heavy duty, and computer controlled. Key features include a stainless steel drum and basket, heavy duty suspension system, large capacity computer PLC for multiple cycles, precision water level sensor, and sound level under 75dB. The washer extractor has pneumatic controls and a 7.5HP variable frequency drive motor.
The document describes the specifications for a 30 kg washer extractor. It shall be high spin, suspended, soft mount, heavy duty, and computer controlled. Key features include a stainless steel drum and basket, heavy duty suspension system, large capacity computer PLC for multiple cycles, precision water level sensor, and sound level under 75dB. The washer extractor has pneumatic controls and a 7.5HP variable frequency drive motor.
It shall be high spin, suspended, soft mount, heavy duty, Computer controlled and Electrically heated. It’s specifications shall be as under:-
1 Outer Drum:Stainless Steel of AISI 304 Quality of 4mm Thickness (minimum).
2 Inner Drum:Made of Stainless Steel sheet of AISI 304 Quality; CNC Perforated; Including design features for maximum agitation to the linen; Minimum thickness of basket sheet – 2 mm; Minimum Back Plate Thickness – 8 mm; Minimum Front Plate thickness – 4 mm. All sheets & plates are GTAW (Gas Tungsten Argon Weld) or TIG welded only; 3 Main Body: Main Body is to be made of suitable size MS Channels; All welded structure; All MS parts & water contact parts are to be spray galvanized & powder coated for better corrosion resistance; 4 Door: Made of Die Pressed Stainless Steel sheet of AISI 304 Quality; Minimum Door Thickness – 2 mm; Complete with toughened glass window at the center & Stainless Steel Door Latch/ Handle; 5 Suspension: Top & Bottom Combination Suspension; minimum 06 Nos. Coil Springs are to be provided at the top for extra stability & 4 Nos. of Heavy Duty Shock Absorbers are to be provided at the bottom for stability during high spin extraction. 6 Pulley: Aluminium Die casted cone pulley connected to the main shaft with taper lock bush; 7 Bearing CGCI (Close Grained Cast Iron) Bearing Housing duly bolted to the Housing: outer drum; Two cylindrical roller bearings duly packed with grease & lubricants; 8 Seal Triple Seal Arrangement to restrict the water to go inside the bearing Arrangement: housing to save bearings & to give trouble free operation for long durations. 9 Computer: Moisture resistant PLC with 24 Program storage capacity with 8 cycles in each program; Large Display; Program to be easy to understand; 10 Water Level High Precision sensor directly mounted on the PLC; Sensor: 11 Soap 5 Compartment Soap Dispenser with Stainless Steel Jugs & High Dispenser: Pressure Jets for Liquid & Solid Detergents; 12 Basket Size: As per OEM Design 13 Basket Minimum 420 Ltrs. Volume: 14 Drain: Suitable size & Pneumatic operation with heavy duty dump type drain valve. 15 Pneumatics: Make: Janatics / SMC / Festo / OEM Recommondations 16 Motor: Minimum 7.5HP Motor; VFD Controlled; This is to be a special motor that works at a frequency range 0 to 140 Hz for the variable basket RPM; Motor Make ABB / Siemens/ LHP or OEM Recommendations 17 Steam Inlet: 1" BSP; Pneumatic Valve Operated; To be provided with Specially Designed Brass Steam Injector for noise less operation; 18 Water Inlet: 1.5" BSP; Pneumatically Operated; 19 Sound Level: Less Than 75 DB; Sound proofing is to be done by pasting special sound proofing material inside the side covers.