Professional Documents
Culture Documents
&
FITLINK
E
Accessories
Chain
G
Tensioners
Idlers
φD’
φd
φD
φO
&
Sprockets
m
S
L
Bushings
Oilless
The chain coupling consists of a shaft coupling assembled from 2 rows of roller chain and 2 sprockets which engage them.
By freely inserting or removing a joint pin, the chain ends can be simply connected or dismantled.
The original KANA structure is such that the case has been split into two perpendicularly to the shaft, and the cases
Transmission
Accessories
KC3012 to KC8022 have a V-shaped groove on both sides with an O-ring inserted to prevent oil leaks.
Chain
Weight ¥
Coupling Pitch Maximum width Minimum
Maximum O D D' m L ℓ S G
E (prepared hole H10) kg
No.
3012H 9.525 23.9 14 (12) 16 45 27 25 5.5 64.8 30 4.8 6 0.4
Couplings
Chain
* The large coupling case KC10020 and beyond uses a method where one side is fixed and the other side is a Z-type seal.
* Since we also manufacture sizes other than those in the catalog, and machine shaft holes/keys/taps, etc., depending on
your request, please contact our sales office for details.
Guide
Imperfect
Products
Video Guide
378
Semi-F Series
&
FITLINK
Chains
Roller
z Order No. Example Method 1 Method 2
3012H Body KC-3012 to KC-8022 Dedicated Cases KC-10020 to KC-12022 Dedicated Cases
Accessories
Chain
(Method with O-ring seals on both sides) (method where one side is fixed and the other is a Z-type oil seal)
(2 MB sprockets + 1 chain) 1 Set 3012L
3012C Case Coupling No.
Tensioners
A
Idlers
* You may order
just the chain if &
Coupling No. and Quantity B B required.
Sprockets
Order Method Dedicated Chain No. Dedicated Case No. Dedicated Case Dedicated Chain
Combinations and Quantity Dedicated Case Weight Dedicated Weight
A B ¥ ¥
No. (kg) Chain No. (kg)
Same-day shipping 3012C 69 63 0.3 3012L 0.1
4012C 77 72 0.3 4012L 0.2
Bushings
Oilless
Postage
4014C 84 75 0.4 4014L 0.2
MB3012 4016C 92 75 0.4 4016L 0.3
MB3012
3012L
=3012H
} 1 Set
5014C
5016C
101
111
85
85
0.5
0.6
5014L
5016L
0.4
0.5
Transmission
Guide
Accessories
3012C 5018C 122 85 0.8 5018L 0.6
• The body (H) consists of 2 sprockets (MB) and 1 6018C 142 106 1.2 6018L 1.0
chain (L). 6020C 158 105 1.6 6020L 1.2
• The body (H) and case (C) make up 1 set. 6022C 168 117 1.8 6022L 1.3
Conveyor Chains/
8018C 190 129 2.5 8018L 2.3
Sprockets
8020C 210 137 2.9 8020L 2.5
8022C 226 137 3.6 8022L 2.7
10020C 281 153 4.6 10020L 4.8
12018C 307 181 6.2 12018L 7.6
Couplings
Chain
* Content of the Body 12022C 357 181 8.0 12022L 9.3
A1 Multi-EP Grease No.2
For the lubricant agent, MBSG04 MBSG25
please use the dedicated Internal Capacity 400g Internal Capacity 2.5kg/16kg
Resin Rails
KANA standard coupling MBSG05
z Order No. Example grease. Internal Capacity 500g
Triple Speed/Carrier
(Transport) Chains
Type Model No.
Chain Coupling No. * An MB sprocket is on one side of the body (only 1 sprocket).
Body Dimensions Chain Coupling No. Prepared Shaft Hole Machining Limits Semi-F
Pulleys/Flanges
Timing Belts/
Weight kg ¥
BL BD Type Model No. Holes Minimum Maximum ¥
29.8 26.5 3012 12 14 16 0.2
36.0 36.0 4012 12 14 22 0.3
36.0 45.0 4014 12 14 30 0.5
Shaft Collars
A. Models differ by shaft hole/key groove machining, NOT MACHINED <--> MACHINED
Chain
&
Chain Coupling With Attached Case
Sprockets
For chain couplings, we recommend that you include a case, and apply grease.
Chain
400g 2.5kg/16kg
MBSG05 5018 0.25 12022 4.30
Internal Capacity 6018 0.40 16018 8.30
500g
6020 0.50 16022 10.00
Pinions/Racks/
Miter Gears
Imperfect
Products
380