Professional Documents
Culture Documents
We Nema PDF
We Nema PDF
NEMA Range
Single Phase motors in rolled steel 48-56 frames
Permanent Split Capacitor
Capacitor Start and Run
IEC Range
Three phase IEC low voltage motors - 56 to 355 frames
DIP (Dust Ignition Proof) motor - Standard range from 71 to 355 frames
CONTENTS Fully certified to international standards
Vibrator motors
Page 10 to 13 2,4,6 and 8 poles
Performance Data Adjustable weights
2
STANDARDS COMPLIANCE
Western Electric motors are designed and Classification of types of enclosures and methods
manufactured to meet the most arduous service of cooling
conditions, viz mining, petrochemical, marine NEMA MG-1 Part 5. The standard defines the
and tropical environments. The motors utilise degree of protection provided by enclosures for
high quality materials and workmanship. With rotating machines, commonly known as “IP”
proper maintenance these motors will operate code.
in severe and rugged conditions.
Degrees of protection
The motors comply with National Standards, Designation First Numeral Second Numeral
such as: Protection Protection against
against contact water
and ingress of
foreign bodies.
• NEMA MG-1 Protection
• IEEE 112 against
hazardous ~ Live
• CSA and UL parts and
moving
• EPCA Compliance certification CC No. 013A mechanical parts
for motors up to 200 HP 2P, 4P and 6P.
5. Ingress of dust 5. Water projected
is not totally in jets against the
prevented, but enclosure from any
dust shall not direction will have
interfere with no harmful effects
the satisfactory
operation of
equipment. A
probe of 1 mm
diameter shall
Rating plate markings not penetrate
NEMA MG-1 Parts 10 and 20. This part specifies the enclosure.
exter nal dimensions and tolerances for IP65 Dust Tight Jetting Water
IP66 Dust Tight Powerful jetting
frames 14 to 50.
3
All Western Electric motors are protected to IP55 Methods of determining losses and efficiency
as standard. Higher levels are available on NEMA MG-1 Part 12 and IEEE 112. Specifies the
request. method of calculating the efficiency of a motor.
STANDARDS COMPLIANCE
4
GENERAL SPECIFICATIONS
Frame and above are varnished using “ Vacuum
Pressure Impregnation” (VPI) process. All
windings are securely laced and braced.
Torque/current characteristics
• In general W.E motors have high starting
torques and low starting currents because the
rotors have a double cage design which is
pressure die cast in high purity aluminium.
5
Connections
Motors are supplied with loose leads in the terminal box for easy connection.
GENERAL SPECIFICATIONS
6
Protections • Fan cowls are made from pressed steel up to
• Thermistors are fitted as standard in 254T frame 405T. Above are cast iron.
frame and above. They can be fitted in smaller
motors as an option. • Motors can be supplied with force ventilation
systems for VVVF drive applications.
• RTD’s or thermostats can also be supplied as
an option. • Rainhoods are available for motors mounted
shaft down.
• Anticondensation heaters can be fitted as an
option to all motors and are recommended • Sun shield are recommended for motors that
for IP56 and IP66 motors. are going to be exposed to direct sunlight in
high ambient temperatures.
• All motors can be supplied with separate
terminal boxes for heaters and/or thermistors. Enclosures
All motors are totally enclosed fan cooled
TECHNICAL INFORMATION MECHANICAL (TEFC) with an IP55 degree of protection as
Construction
standard. Higher IP factors are available on
• All motors are available with stator frames
request.
made from T200 grade cast iron.
7 GENERAL SPECIFICATIONS
Bearings and Lubrication Vibration
• High quality vacuum degassed SKF, FAG and • These motors have very low vibration levels
NSK bearings are used on W.E motors. In due to high precision balancing of the rotors
general the bearings have C3 clearances and and fans. Most motors have vibration levels
are preloaded with a wave washer on the drive of less than 1mm/sec.
end which increases bearing life and reduces Noise
bearing noise. The Non drive end bearing is • Standard noise levels, (sound pressure at 1
located to prevent shaft “float”. Frames 56 metre), are well within the requirements of
to 215T utilize shielded bearings whilst frames most standards, and are generally below
254T to 449T offer regreasable bearings. 80dB(A) for small motors and 85dB(A) for
Frames 254T and above are fitted with grease large motors.
relieving rotating Labyrinth seals as standard.
Rotation
• Special bearing arrangements can be such as • All standard motors are designed to run in
fitting angular contact, or 4 point contact QJ either direction. Some larger 2 pole motors
bearings, for thrust loads. may require unidirectional fans to meet special
noise level requirements.
• The bearings on all motors 254T and above
are protected from external environment with Paint Finish
labyrinth seals on the drive and non drive end. • All cast iron motor parts are cleaned and etch
primed (polyvinyl butyral and epoxy) to 25
• Recommended grease for regreasing is Shell
microns or more before machining.
Alvania R3.
Aluminium parts are etch primed on external
surfaces. Final top coat paint is an air drying
• The bearings on all motors 254T and above
enamel based on epoxy polymer resins to 25
are protected from external environment with
microns or more. The colour is blue (RAL 5015)
labyrinth seals on the drive and non drive end.
as standards.
GENERAL SPECIFICATIONS
8
Long Service Life Crusher Duty
Rugged cast iron construction handles shock 30 HP and above meet NEMA Design C
loads and corrosive environments, and improves specifications. All motors come with high strength
heat dissipation for cooler operation. Lightweight 4140 Grade Steel Shaft. All motors 254T Frame
Aluminum is also available in 56 through 215T and above come with Thermistors as standard.
frame.
Please contact your nearest W.E office with your
OTHER FEATURES requirements.
• Special paint treatments are available on
request.
• High Temperature
Double shaft extensions.
• Special Voltage
Non standard shaft sizes.
9 GENERAL SPECIFICATIONS
PERFORMANCE DATA
1D(A)N143T-2 1.5 3478 85.5 82.5 0.85 4.00 2.0 2.3 1.25 500 20 500 M 53 35
1D(A)N145T-2 2 3480 85.5 82.5 0.87 5.20 2.6 3.0 1.25 440 27 500 M 53 35
1D(A)N182T-2 3 3527 86.5 84.0 0.85 7.80 3.9 4.5 1.25 270 35 420 L 88 68
1D(A)N184T-2 5 3522 88.5 86.5 0.87 12.40 6.2 7.5 1.25 250 49 360 J 99 77
1D(A)N213T-2 7.5 3518 89.5 87.5 0.89 18.00 9.0 11.2 1.25 200 64 250 H 137 105
1D(A)N215T-2 10 3514 90.2 88.5 0.90 23.60 11.8 15.0 1.25 170 70 260 H 143 110
1DN254T-2 15 3549 90.2 88.5 0.86 36.40 18.2 22.2 1.25 240 120 300 H 330
1DN256T-2 20 3544 91.0 89.5 0.86 48.20 24.1 29.7 1.25 220 157 280 H 374
1DN284TS-2 25 3550 91.7 90.2 0.90 57.20 28.6 37.0 1.25 250 192 300 H 418
1DN286TS-2 30 3547 91.7 90.2 0.90 68.60 34.3 44.4 1.25 220 218 250 G 440
1DN324TS-2 40 3552 92.4 91.0 0.90 90.00 45.0 59.2 1.15 200 260 300 F 616
1DN326TS-2 50 3554 93.0 91.7 0.90 112.60 56.3 73.9 1.15 200 350 300 G 660
1DN364TS-2 60 3572 93.0 91.7 0.91 134.20 67.1 88.3 1.15 200 460 280 G 905
1DN365TS-2 75 3573 93.6 92.4 0.91 169.60 84.8 110.3 1.15 200 590 340 H 924
1DN405TS-2 100 3571 94.1 93.0 0.90 222.20 111.1 147.1 1.15 220 750 260 G 1232
1DN444TS-2 125 3580 94.5 93.6 0.90 N/A 137.6 183.5 1.25 170 980 280 H 1500
1DN445TS-2 150 3580 95.0 94.1 0.90 N/A 163.3 220.1 1.25 170 1170 220 H 1620
1DN447TS-2 200 3580 95.0 94.1 0.90 N/A 219.0 293.5 1.15 170 1560 220 H 2205
2DN449TS-2 250 3580 95.4 94.5 0.90 N/A 272.6 366.9 1.15 120 1700 220 H 2575
2DN449TS-2 300 3580 95.4 94.5 0.90 N/A 327.2 440.3 1.25 120 1900 240 F 2650
2DN449TS-2 350 3580 95.4 94.5 0.90 N/A 381.7 513.7 1.25 100 2500 200 G 2700
10
4 POLE - 1800 RPM SYNCHRONOUS SPEED 60 Hz
1D(A)N143T-4 1 1738 82.5 80.0 0.68 3.0 1.5 3.0 1.25 400 13 480 M 49 35
1D(A)N145T-4 1.5 1742 84.0 81.5 0.68 4.6 2.3 4.5 1.25 400 21 400 M 57 38
1D(A)N145T-4 2 1736 84.0 81.5 0.72 6.0 3.0 6.1 1.25 400 26 410 M 57 38
1D(A)N182T-4 3 1754 87.5 85.5 0.81 8.0 4.0 9.0 1.25 300 35 400 L 99 77
1D(A)N184T-4 5 1740 87.5 85.5 0.82 12.8 6.4 15.1 1.25 280 50 390 J 102 79
1D(A)N213T-4 7.5 1757 90.2 88.5 0.85 18.4 9.2 22.4 1.25 200 68 270 H 132 108
1D(A)N215T-4 10 1755 90.2 88.5 0.85 24.4 12.2 29.9 1.25 200 81 270 H 143 120
1DN254T-4 15 1761 91.0 89.5 0.82 37.6 18.8 44.8 1.25 200 116 250 H 341
1DN256T-4 20 1768 91.7 90.2 0.83 49.4 24.7 59.4 1.25 230 160 300 H 396
1DN284T-4 25 1771 92.4 91.0 0.84 57.0 28.5 74.2 1.25 160 182 250 H 462
1DN286T-4 30 1770 93.0 91.7 0.89 68.4 34.2 89.1 1.25 220 230 260 H 484
1DN324T-4 40 1775 93.6 92.4 0.88 91.4 45.7 118.4 1.15 210 310 300 H 638
1DN326T-4 50 1776 93.6 92.4 0.88 114.4 57.2 147.9 1.15 200 390 300 H 682
1DN364T-4 60 1785 94.1 93.0 0.88 139.4 69.7 176.6 1.15 170 435 280 G 905
1DN365T-4 75 1785 94.5 93.6 0.88 172.4 86.2 220.8 1.15 170 543 260 G 990
1DN405TS-4 100 1783 94.5 93.6 0.89 222.6 111.3 294.7 1.15 180 730 260 G 1254
1DN444T-4 125 1788 94.5 93.6 0.89 N/A 136.1 367.3 1.25 150 908 220 G 1610
1DN445T-4 150 1788 95.0 94.1 0.88 N/A 162.5 440.8 1.25 150 1085 220 G 2210
1DN447TZ-4 200 1788 95.0 94.1 0.9 N/A 219.0 587.7 1.25 150 1450 250 G 2220
2DN449TZ-4 250 1785 95.0 94.1 0.88 N/A 280.0 735.9 1.15 150 1825 200 G 2570
2DN449TZ-4 300 1783 95.0 94.1 0.88 N/A 336.0 884.1 1.15 170 2400 250 H 2650
2DN449TZ-4 350 1783 95.0 94.1 0.88 N/A 392.0 1031.4 1.25 170 2600 230 H 2700
PERFORMANCE DATA
11
6 POLE - 1200 RPM SYNCHRONOUS SPEED 60 Hz
1D(A)N143T-6 0.75 1144 78.5 75.5 0.61 2.8 1.4 3.4 1.25 220 9 280 L 45 30
1D(A)N145T-6 1 1150 80.0 77.0 0.68 3.8 1.9 4.6 1.25 200 12 280 L 53 35
1D(A)N182T-6 1.5 1167 85.5 82.5 0.67 4.9 2.5 6.8 1.25 350 20 400 M 102 79
1D(A)N184T-6 2 1167 86.5 84.0 0.7 6.2 3.1 9.0 1.25 310 28 400 J 104 82
1D(A)N213T-6 3 1174 87.5 85.5 0.74 8.6 4.3 13.4 1.25 300 36 400 L 121 90
1D(A)N215T-6 5 1164 87.5 85.5 0.79 13.6 6.8 22.6 1.25 200 50 230 J 121 90
1DN254T-6 7.5 1176 89.5 87.5 0.77 20.4 10.2 33.5 1.25 210 64 330 H 297
1DN256T-6 10 1175 90.2 88.5 0.76 26.8 13.4 44.7 1.25 210 83 300 H 330
1DN284T-6 15 1179 91.0 89.5 0.83 39.4 19.7 66.8 1.25 200 126 250 J 396
1DN286T-6 20 1179 91.7 90.2 0.85 50.6 25.3 89.1 1.25 240 145 220 G 418
1DN324T-6 25 1180 92.4 91.0 0.82 61.4 30.7 111.3 1.25 200 195 280 G 638
1DN326T-6 30 1179 92.4 91.0 0.83 73.8 36.9 133.7 1.15 200 230 280 H 682
1DN364T-6 40 1183 93.0 91.7 0.86 92.4 46.2 177.7 1.15 200 270 300 G 858
1DN365T-6 50 1182 93.0 91.7 0.86 115.6 57.8 222.3 1.15 180 340 240 F 905
1DN404T-6 60 1187 94.1 93.0 0.86 138.4 69.2 265.6 1.15 190 470 300 G 1140
1DN405T-6 75 1185 94.1 93.0 0.87 172.4 86.2 332.5 1.15 190 575 200 G 1166
1DN444T-6 100 1191 94.1 93.0 0.85 N/A 119.9 441.2 1.25 150 750 230 H 1560
1DN445T-6 125 1191 94.1 93.0 0.85 N/A 147.4 551.4 1.25 150 980 220 G 1860
1DN447TZ-6 150 1191 95.0 94.1 0.85 N/A 173.9 661.7 1.15 150 1085 220 H 1760
2DN449TZ-6 200 1190 94.5 93.6 0.85 N/A 233.1 883.1 1.15 170 1500 240 G 2610
2DN449TZ-6 250 1190 94.5 93.6 0.85 N/A 291.4 1103.8 1.15 150 1800 220 G 2660
2DN449TZ-6 300 1190 94.5 93.6 0.85 N/A 349.7 1324.6 1.15 150 2200 220 G 2720
PERFORMANCE DATA
12
8 POLE - 900 RPM SYNCHRONOUS SPEED 60 Hz
1D(A)N143T-8 0.5 840 70.0 66.0 0.5 2.7 1.4 3.1 1.0 200 4 250 H 45 30
1D(A)N145T-8 0.75 840 72.0 68.0 0.53 3.7 1.9 4.7 1.0 200 6 250 H 53 35
1D(A)N182T-8 1 850 74.0 70.0 0.55 4.6 2.5 6.2 1.0 190 8 240 H 102 79
1D(A)N184T-8 1.5 860 77.0 74.0 0.51 7.2 3.1 9.2 1.0 180 12 230 H 104 82
1D(A)N213T-8 2 870 82.5 80.0 0.67 6.8 4.3 12.1 1.0 190 13 230 G 121 90
1D(A)N215T-8 3 870 84.0 81.5 0.64 10.4 6.8 18.1 1.0 200 23 240 H 121 90
1DN254T-8 5 870 86.5 84.0 0.73 14.8 10.2 30.2 1.0 190 42 250 H 297
1DN256T-8 7.5 870 86.5 84.0 0.81 20.0 13.4 45.3 1.0 170 50 240 G 330
1DN284T-8 10 870 88.5 86.5 0.76 27.8 19.7 60.4 1.0 170 77 220 G 396
1DN286T-8 15 870 89.5 87.5 0.77 40.8 25.3 90.6 1.0 190 110 200 G 418
1DN324T-8 20 880 90.2 88.5 0.75 55.4 30.7 119.4 1.0 170 150 210 G 638
1DN326T-8 25 880 90.2 88.5 0.74 70.1 36.9 149.3 1.0 160 190 200 G 682
1DN364T-8 30 880 91.0 89.5 0.74 83.4 46.2 179.1 1.0 160 215 200 G 858
1DN365T-8 40 880 91.0 89.5 0.74 111.2 57.8 238.8 1.0 150 300 210 G 905
1DN404T-8 50 883 91.7 90.2 0.73 139.9 69.2 297.5 1.0 160 380 200 G 1140
1DN405T-8 60 885 92.4 91.0 0.75 162.1 86.2 356.2 1.0 150 430 200 G 1166
1DN444T-8 75 885 93.0 91.7 0.75 N/A 119.9 445.3 1.0 150 540 200 G 1560
1DN445T-8 100 885 93.0 91.7 0.74 N/A 147.4 593.7 1.0 150 740 200 G 1860
1DN447T-8 125 885 93.6 92.4 0.76 N/A 164.5 742.1 1.0 140 890 200 G 1760
2DN449T-8 150 885 93.6 92.4 0.75 N/A 200.1 890.5 1.0 140 1100 200 G 2610
13 PERFORMANCE DATA
1DN DIMENSIONS - FOOT MOUNT
143T - 215T
254T - 449T
14
Frame A * AA AB AF B BA C D 2E 2F G H J P T O V ES N-W R S U
143 6.9 2 X 3/4-14 5.5 2.0 6.6 2.25 14.8 3.50 5.5 4.00 0.60 0.34 1.6 7.4 — 7.2 2.15 1.41 2.250 0.771 0.188 0.875
145 6.9 2 X 3/4-14 5.5 2.0 6.6 2.25 14.8 3.50 5.5 5.00 0.60 0.34 1.6 7.4 — 7.2 2.15 1.41 2.250 0.771 0.188 0.875
182 9.1 2 X 1-11 1/2 6.5 2.3 7.8 2.75 17.7 4.50 7.5 4.50 0.65 0.41 1.8 9.3 1.50 9.3 2.65 1.78 2.750 0.986 0.250 1.125
184 9.1 2 X 1-11 1/2 6.5 2.3 7.8 2.75 17.7 4.50 7.5 5.50 0.65 0.41 1.8 9.3 1.50 9.3 2.65 1.78 2.750 0.986 0.250 1.125
213 10.3 2 X 1-11 1/2 7.7 2.3 9.6 3.50 20.5 5.25 8.5 5.50 0.70 0.41 2.0 11.2 1.80 10.9 3.28 2.41 3.380 1.201 0.312 1.375
215 10.3 2 X 1-11 1/2 7.7 2.3 9.6 3.50 20.5 5.25 8.5 7.00 0.70 0.41 2.0 11.2 1.80 10.9 3.28 2.41 3.380 1.201 0.312 1.375
254 12.6 1 X 1 1/4-11 1/2 10.0 3.5 13.3 4.25 26.6 6.25 10.0 8.25 0.70 0.53 2.8 13.0 1.60 12.5 3.90 2.91 4.000 1.416 0.375 1.625
256 12.6 1 X 1 1/4-11 1/2 10.0 3.5 13.3 4.25 26.6 6.25 10.0 10.00 0.70 0.53 2.8 13.0 1.60 12.5 3.90 2.91 4.000 1.416 0.375 1.625
284 2P 14.0 2 X 1 1/2-11 1/2 11.0 3.5 13.8 4.75 28.0 7.00 11.0 9.50 0.87 0.53 3.0 14.7 0.70 14.5 3.10 1.91 3.250 1.416 0.375 1.625
286 2P 14.0 2 X 1 1/2-11 1/2 11.0 3.5 13.8 4.75 28.0 7.00 11.0 11.00 0.87 0.53 3.0 14.7 0.70 14.5 3.10 1.91 3.250 1.416 0.375 1.625
284 4-8P 14.0 2 X 1 1/2-11 1/2 11.0 3.5 13.8 4.75 29.5 7.00 11.0 9.50 0.87 0.53 3.0 14.7 0.70 14.5 4.47 3.28 4.620 1.591 0.500 1.875
286 4-8P 14.0 2 X 1 1/2-11 1/2 11.0 3.5 13.8 4.75 29.5 7.00 11.0 11.00 0.87 0.53 3.0 14.7 0.70 14.5 4.47 3.28 4.620 1.591 0.500 1.875
324 2P 16.0 2 X 2-11 1/2 13.0 4.4 15.0 5.25 30.0 8.00 12.5 10.50 1.10 0.66 3.3 17.0 1.70 15.9 3.50 2.03 3.750 1.591 0.500 1.875
326 2P 16.0 2 X 2-11 1/2 13.0 4.4 15.0 5.25 30.0 8.00 12.5 12.00 1.10 0.66 3.3 17.0 1.70 15.9 3.50 2.03 3.750 1.591 0.500 1.875
324 4-8P 15.5 2 X 2-11 1/2 13.0 4.4 15.0 5.25 31.5 8.00 12.5 10.50 1.20 0.66 3.4 17.0 1.40 16.2 5.10 3.91 5.250 1.845 0.500 2.125
326 4-8P 15.5 2 X 2-11 1/2 13.0 4.4 15.0 5.25 31.5 8.00 12.5 12.00 1.20 0.66 3.4 17.0 1.40 16.2 5.10 3.91 5.250 1.845 0.500 2.125
364 2P 17.4 2 X 2-11 1/2 13.8 4.4 17.2 5.88 34.1 9.00 14.0 11.25 1.10 0.66 3.5 18.5 1.30 18.2 3.60 2.03 3.750 1.591 0.500 1.875
365 2P 17.4 2 X 2-11 1/2 13.8 4.4 17.2 5.88 34.1 9.00 14.0 12.25 1.10 0.66 3.5 18.5 1.30 18.2 3.60 2.03 3.750 1.591 0.500 1.875
364 4-8P 17.4 2 X 2-11 1/2 13.8 4.4 17.2 5.88 34.1 9.00 14.0 11.25 1.10 0.66 3.5 18.5 1.30 18.2 5.73 4.28 5.880 2.021 0.625 2.375
365 4-8P 17.4 2 X 2-11 1/2 13.8 4.4 17.2 5.88 34.1 9.00 14.0 12.25 1.10 0.66 3.5 18.5 1.30 18.2 5.73 4.28 5.880 2.021 0.625 2.375
405 2-4P 19.5 2 X 3-8 15.6 7.6 19.9 6.62 37.3 10.00 16.0 13.75 1.42 0.81 4.1 22.8 0.90 19.7 4.10 2.78 4.250 1.845 0.500 2.125
404 6-8P 19.5 2 X 3-8 15.6 7.6 19.9 6.62 40.3 10.00 16.0 12.25 1.42 0.81 4.1 22.8 0.90 19.7 7.10 5.65 7.250 2.450 0.750 2.875
405 6-8P 19.5 2 X 3-8 15.6 7.6 19.9 6.62 40.3 10.00 16.0 13.75 1.42 0.81 4.1 22.8 0.90 19.7 7.10 5.65 7.250 2.450 0.750 2.875
444 2P 21.7 2 X 3-8 18.5 7.6 22.0 7.50 43.7 11.00 18.0 14.50 1.36 0.81 4.6 24.5 2.25 20.4 4.50 3.03 4.750 2.021 0.625 2.375
444 4-8P 21.7 2 X 3-8 18.5 7.6 22.0 7.50 47.5 11.00 18.0 14.50 1.36 0.81 4.6 24.5 2.25 20.4 8.25 6.91 8.500 2.880 0.875 3.375
445 2P 21.7 2 X 3-8 18.5 7.6 22.0 7.50 43.7 11.00 18.0 16.50 1.36 0.81 4.6 24.5 2.25 20.4 4.50 3.03 4.750 2.021 0.625 2.375
445 4-8P 21.7 2 X 3-8 18.5 7.6 22.0 7.50 47.5 11.00 18.0 16.50 1.36 0.81 4.6 24.5 2.25 20.4 8.25 6.91 8.500 2.880 0.875 3.375
447 2P 21.7 2 X 3-8 18.5 7.6 29.0 7.50 49.6 11.00 18.0 20.00 1.36 0.81 4.6 24.5 2.25 20.4 4.50 3.03 4.750 2.021 0.625 2.375
447 4-8P 21.7 2 X 3-8 18.5 7.6 29.0 7.50 55.0 11.00 18.0 20.00 1.36 0.81 4.6 24.5 2.25 20.4 9.62 8.50 10.125 2.880 0.875 3.375
449 2P 25.6 2 X 3-8 21.3 3.2 46.8 7.50 69.5 11.00 18.0 25.00 1.33 0.81 6.0 26.7 4.60 24.4 4.50 3.03 4.750 2.021 0.625 2.375
449 4-8P 25.6 2 X 3-8 21.3 3.2 46.8 7.50 75.0 11.00 18.0 25.00 1.33 0.81 6.0 26.7 4.60 24.4 9.62 8.50 10.125 2.880 0.875 3.375
143T - 215T
254T - 447T
16
Frame * AA AB AF AJ AK BB BC BD BE BF C ES N-W P T V R S U
143 2 X 3/4-14 5.5 2.0 10.00 9.0 0.25 0.00 11.00 0.50 4 X 0.53 14.8 1.41 2.250 7.4 — 2.15 0.771 0.188 0.875
145 2 x 3/4-14 5.5 2.0 10.00 9.0 0.25 0.00 11.00 0.50 4 x 0.53 14.8 1.41 2.250 7.4 — 2.15 0.771 0.188 0.875
182 2 x 1-11 1/2 6.5 2.3 10.00 9.0 0.25 0.00 11.00 0.50 4 x 0.53 17.7 1.78 2.750 9.3 1.50 2.65 0.986 0.250 1.125
184 2 x 1-11 1/2 6.5 2.3 10.00 9.0 0.25 0.00 11.00 0.50 4 x 0.53 17.7 1.78 2.750 9.3 1.50 2.65 0.986 0.250 1.125
213 2 x 1-11 1/2 7.7 2.3 10.00 9.0 0.25 0.00 11.00 0.50 4 x 0.53 20.5 2.41 3.380 11.2 1.80 3.28 1.201 0.312 1.375
215 2 x 1-11 1/2 7.7 2.3 10.00 9.0 0.25 0.00 11.00 0.50 4 x 0.53 20.5 2.41 3.380 11.2 1.80 3.28 1.201 0.312 1.375
254 1 x 1 1/4-11 1/2 10.0 3.5 12.50 11.0 0.25 0.00 14.00 0.75 4 x 0.81 26.6 2.91 4.000 13.0 1.60 3.90 1.416 0.375 1.625
256 1 x 1 1/4-11 1/2 10.0 3.5 12.50 11.0 0.25 0.00 14.00 0.75 4 x 0.81 26.6 2.91 4.000 13.0 1.60 3.90 1.416 0.375 1.625
284 2P 2 x 1 1/2-11 1/2 11.0 3.5 12.50 11.0 0.25 0.00 14.00 0.75 4 x 0.81 28.0 1.91 3.250 14.7 1.00 3.10 1.416 0.375 1.625
286 2P 2 x 1 1/2-11 1/2 11.0 3.5 12.50 11.0 0.25 0.00 14.00 0.75 4 x 0.81 28.0 1.91 3.250 14.7 1.00 3.10 1.416 0.375 1.625
284 4-8P 2 x 1 1/2-11 1/2 11.0 3.5 12.50 11.0 0.25 0.00 14.00 0.75 4 x 0.81 29.5 3.28 4.620 14.7 1.00 4.47 1.591 0.500 1.875
286 4-8P 2 x 1 1/2-11 1/2 11.0 3.5 12.50 11.0 0.25 0.00 14.00 0.75 4 x 0.81 29.5 3.28 4.620 14.7 1.00 4.47 1.591 0.500 1.875
324 2P 2 x 2-11 1/2 13.0 4.4 16.00 14.0 0.25 0.00 18.00 0.75 4 x 0.81 30.0 2.03 3.750 17.0 1.40 3.60 1.591 0.500 1.875
326 2P 2 x 2-11 1/2 13.0 4.4 16.00 14.0 0.25 0.00 18.00 0.75 4 x 0.81 30.0 2.03 3.750 17.0 1.40 3.60 1.591 0.500 1.875
324 4-8P 2 x 2-11 1/2 13.0 4.4 16.00 14.0 0.25 0.00 18.00 0.75 4 x 0.81 31.5 3.91 5.250 17.0 1.40 5.10 1.845 0.500 2.125
326 4-8P 2 x 2-11 1/2 13.0 4.4 16.00 14.0 0.25 0.00 18.00 0.75 4 x 0.81 31.5 3.91 5.250 17.0 1.40 5.10 1.845 0.500 2.125
364 2P 2 x 2-11 1/2 13.8 4.4 16.00 14.0 0.25 0.00 18.00 0.75 4 x 0.81 34.1 2.03 3.750 18.5 1.70 3.60 1.591 0.500 1.875
365 2P 2 x 2-11 1/2 13.8 4.4 16.00 14.0 0.25 0.00 18.00 0.75 4 x 0.81 34.1 2.03 3.750 18.5 1.70 3.60 1.591 0.500 1.875
364 4-8P 2 x 2-11 1/2 13.8 4.4 16.00 14.0 0.25 0.00 18.00 0.75 4 x 0.81 34.1 4.28 5.880 18.5 1.70 5.73 2.021 0.625 2.375
365 4-8P 2 x 2-11 1/2 13.8 4.4 16.00 14.0 0.25 0.00 18.00 0.75 4 x 0.81 34.1 4.28 5.880 18.5 1.70 5.73 2.021 0.625 2.375
405 2-4P 2 x 3-8 15.6 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 37.3 2.78 4.250 22.8 0.90 4.10 1.845 0.500 2.125
404 6-8P 2 x 3-8 15.6 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 40.3 5.65 7.250 22.8 0.90 7.10 2.450 0.750 2.875
405 6-8P 2 x 3-8 15.6 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 40.3 5.65 7.250 22.8 0.90 7.10 2.450 0.750 2.875
444 2P 2 x 3-8 18.5 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 43.7 3.03 4.750 24.5 2.25 4.50 2.021 0.625 2.375
444 4-8P 2 x 3-8 18.5 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 47.5 6.91 8.500 24.5 2.25 8.25 2.880 0.875 3.375
445 2P 2 x 3-8 18.5 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 43.7 3.03 4.750 24.5 2.25 4.50 2.021 0.625 2.375
445 4-8P 2 x 3-8 18.5 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 47.5 6.91 8.500 24.5 2.25 8.25 2.880 0.875 3.375
447 2P 2 x 3-8 18.5 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 49.6 3.03 4.750 24.5 2.25 4.50 2.021 0.625 2.375
447 4-8P 2 x 3-8 18.5 7.6 20.00 18.0 0.25 0.00 22.00 1.00 8 x 0.81 55.0 6.91 10.125 24.5 2.25 8.25 2.880 0.875 3.375
143T - 215T
254T - 447T
18
Frame * AA AB AF AJ AK BB BC BD BF C ES N-W P T V R S U
143 2 X 3/4-14 5.5 2.0 5.875 4.5 0.16 0.12 6.50 4 X 3/8-16 14.8 1.41 2.250 7.4 — 2.15 0.771 0.188 0.875
145 2 x 3/4-14 5.5 2.0 5.875 4.5 0.16 0.12 6.50 4 X 3/8-16 14.8 1.41 2.250 7.4 — 2.15 0.771 0.188 0.875
182 2 x 1-11 1/2 6.5 2.3 7.250 8.5 0.25 0.12 9.00 4 X 1/2-13 17.7 1.78 2.750 9.3 1.50 2.65 0.986 0.250 1.125
184 2 x 1-11 1/2 6.5 2.3 7.250 8.5 0.25 0.12 9.00 4 X 1/2-13 17.7 1.78 2.750 9.3 1.50 2.65 0.986 0.250 1.125
213 2 x 1-11 1/2 7.7 2.3 7.250 8.5 0.25 0.25 9.00 4 X 1/2-13 20.5 2.41 3.380 11.2 1.80 3.28 1.201 0.312 1.375
215 2 x 1-11 1/2 7.7 2.3 7.250 8.5 0.25 0.25 9.00 4 X 1/2-13 20.5 2.41 3.380 11.2 1.80 3.28 1.201 0.312 1.375
254 1 x 1 1/4-11 1/2 10.0 3.5 7.250 8.5 0.25 0.25 10.00 4 X 1/2-13 26.6 2.91 4.000 13.0 1.60 3.90 1.416 0.375 1.625
256 1 x 1 1/4-11 1/2 10.0 3.5 7.250 8.5 0.25 0.25 10.00 4 X 1/2-13 26.6 2.91 4.000 13.0 1.60 3.90 1.416 0.375 1.625
284 2P 2 x 1 1/2-11 1/2 11.0 3.5 9.000 10.5 0.25 0.25 11.25 4 X 1/2-13 28.0 1.91 3.250 14.7 1.00 3.10 1.416 0.375 1.625
286 2P 2 x 1 1/2-11 1/2 11.0 3.5 9.000 10.5 0.25 0.25 11.25 4 X 1/2-13 28.0 1.91 3.250 14.7 1.00 3.10 1.416 0.375 1.625
284 4-8P 2 x 1 1/2-11 1/2 11.0 3.5 9.000 10.5 0.25 0.25 11.25 4 X 1/2-13 29.5 3.28 4.620 14.7 1.00 4.47 1.591 0.500 1.875
286 4-8P 2 x 1 1/2-11 1/2 11.0 3.5 9.000 10.5 0.25 0.25 11.25 4 X 1/2-13 29.5 3.28 4.620 14.7 1.00 4.47 1.591 0.500 1.875
324 2P 2 x 2-11 1/2 13.0 4.4 11.000 12.5 0.25 0.25 14.00 4 X 5/8-11 30.0 2.03 3.750 17.0 1.40 3.60 1.591 0.500 1.875
326 2P 2 x 2-11 1/2 13.0 4.4 11.000 12.5 0.25 0.25 14.00 4 X 5/8-11 30.0 2.03 3.750 17.0 1.40 3.60 1.591 0.500 1.875
324 4-8P 2 x 2-11 1/2 13.0 4.4 11.000 12.5 0.25 0.25 14.00 4 X 5/8-11 31.5 3.91 5.250 17.0 1.40 5.10 1.845 0.500 2.125
326 4-8P 2 x 2-11 1/2 13.0 4.4 11.000 12.5 0.25 0.25 14.00 4 X 5/8-11 31.5 3.91 5.250 17.0 1.40 5.10 1.845 0.500 2.125
364 2P 2 x 2-11 1/2 13.8 4.4 11.000 12.5 0.25 0.25 14.00 4 X 5/8-11 34.1 2.03 3.750 18.5 1.70 3.60 1.591 0.500 1.875
365 2P 2 x 2-11 1/2 13.8 4.4 11.000 12.5 0.25 0.25 14.00 4 X 5/8-11 34.1 2.03 3.750 18.5 1.70 3.60 1.591 0.500 1.875
364 4-8P 2 x 2-11 1/2 13.8 4.4 11.000 12.5 0.25 0.25 14.00 4 X 5/8-11 34.1 4.28 5.880 18.5 1.70 5.73 2.021 0.625 2.375
365 4-8P 2 x 2-11 1/2 13.8 4.4 11.000 12.5 0.25 0.25 14.00 4 X 5/8-11 34.1 4.28 5.880 18.5 1.70 5.73 2.021 0.625 2.375
405 2-4P 2 x 3-8 15.6 7.6 11.000 12.5 0.25 0.25 15.50 4 X 5/8-11 37.3 2.78 4.250 22.8 0.90 4.10 1.845 0.500 2.125
404 6-8P 2 x 3-8 15.6 7.6 11.000 12.5 0.25 0.25 15.50 4 X 5/8-11 40.3 5.65 7.250 22.8 0.90 7.10 2.450 0.750 2.875
405 6-8P 2 x 3-8 15.6 7.6 11.000 12.5 0.25 0.25 15.50 4 X 5/8-11 40.3 5.65 7.250 22.8 0.90 7.10 2.450 0.750 2.875
444 2P 2 x 3-8 18.5 7.6 14.000 16.0 0.25 0.25 18.00 4 X 5/8-11 43.7 3.03 4.750 24.5 2.25 4.50 2.021 0.625 2.375
444 4-8P 2 x 3-8 18.5 7.6 14.000 16.0 0.25 0.25 18.00 4 X 5/8-11 47.5 6.91 8.500 24.5 2.25 8.25 2.880 0.875 3.375
445 2P 2 x 3-8 18.5 7.6 14.000 16.0 0.25 0.25 18.00 4 X 5/8-11 43.7 3.03 4.750 24.5 2.25 4.50 2.021 0.625 2.375
445 4-8P 2 x 3-8 18.5 7.6 14.000 16.0 0.25 0.25 18.00 4 X 5/8-11 47.5 6.91 8.500 24.5 2.25 8.25 2.880 0.875 3.375
447 2P 2 x 3-8 18.5 7.6 14.000 16.0 0.25 0.25 18.00 4 X 5/8-11 49.6 3.03 4.750 24.5 2.25 4.50 2.021 0.625 2.375
447 4-8P 2 x 3-8 18.5 7.6 14.000 16.0 0.25 0.25 18.00 4 X 5/8-11 55.0 6.91 10.125 24.5 2.25 8.25 2.880 0.875 3.375
143T - 256T
Frame A * AA AB AF B BA C D 2E 2F G H J P T O V ES N-W R S U
143 7.0 2 X 3/4-14 5.5 2.3 5.4 2.25 14.8 3.50 5.5 4.00 0.16 0.34 1.42 7.1 — 7.0 2.00 1.41 2.250 0.771 0.188 0.875
145 7.0 2 X 3/4-14 5.5 2.3 6.0 2.25 14.8 3.50 5.5 5.00 0.16 0.34 1.42 7.1 — 7.0 2.00 1.41 2.250 0.771 0.188 0.875
182 9.0 2 X 1-11 1/2 6.5 2.3 6.9 2.75 17.7 4.50 7.5 4.50 0.16 0.41 1.62 8.8 1.90 8.9 2.50 1.78 2.750 0.986 0.250 1.125
184 9.0 2 X 1-11 1/2 6.5 2.3 6.9 2.75 17.7 4.50 7.5 5.50 0.16 0.41 1.62 8.8 1.90 8.9 2.50 1.78 2.750 0.986 0.250 1.125
213 10.4 2 X 1-11 1/2 7.3 2.3 8.8 3.50 20.5 5.25 8.5 5.50 0.20 0.41 1.62 10.4 1.40 10.4 3.12 2.41 3.380 1.201 0.312 1.375
215 10.4 2 X 1-11 1/2 7.3 2.3 8.8 3.50 20.5 5.25 8.5 7.00 0.20 0.41 1.62 10.4 1.40 10.4 3.12 2.41 3.380 1.201 0.312 1.375
20
BEARING DATA
mm in mm in mm in
21
BEARING AND GREASING ARRANGEMENTS
NOTE: OTHER BEARING ARRANGEMENTS ARE AVAILBLE AND WILL BE SELECTED AS THE APPLICATION REQUIRES.
22 BEARING DATA
TERMINAL BOX DATA
2 CONDUIT ENTRIES
3/4 - 14 NPSC
143T-145T
2 CONDUIT ENTRIES
1 - 111/2 NPSC
182T-215T
23
ALL DIMENSIONS IN INCHES
2 CONDUIT ENTRIES
11/2 - 111/2 NPSC
254T-286T
2 CONDUIT ENTRIES
2 - 111/2 NPSC
324T-365T
2 CONDUIT ENTRIES
3 - 8 NPSC
404T-405T
2 CONDUIT ENTRIES
3 - 8 NPSC
444T-449T
26
TERMINAL BOX DETAILS
PARTS LIST
EXPLODED VIEW 254T - 447T
27
TERMINAL BOX DETAILS
PARTS LIST
28
PARTS LIST
29
NOTES
30
Western Electric reserves the right to make changes to the performance data and dimensions in this brochure without notice. This information is for reference only.
31 NOTES