Professional Documents
Culture Documents
How To Make Isometric Dimension and Text in AutoCAD
How To Make Isometric Dimension and Text in AutoCAD
I have also prepared this video for explaining this tip, but if you prefer the article instead of
video then scroll down to for the full article.
Now type DIMEDIT on the command line and press enter, select oblique from the command line
as shown in the image below.
Now click on dimension marked A from drawing shown above and press enter. Command line
will prompt you to select an angle to align this dimension type 30 and press enter again. Your
dimension will now align with the geometry to make it look like isometric dimension.
For dimensions B and C you can use the same method with the oblique angle of 30 and -30
respectively. Your final drawing will look like this after using DIMEDIT on all three dimensions.
Type DIMTEDIT on the command line and press enter then click on the dimension which you
want to edit, I am selecting dimension C for this case.
From the command line, select Angle option and type an angle of 30 degrees then press enter. The
dimension text will now align with the dimension line. For dimensions, A and B use an angle of
30 and -30 degrees respectively in DIMTEDIT command.
Type any text and press enter twice to exit the TEXT command, I am using “Text” as the sample
text on the isometric cube.
Repeat the process of writing text on the face of cube towards dimension B as well, but in this case
change angle of text to -30 degrees keeping all other parameters unchanged.
Now select text on the face of dimension C then right click and select Properties from the
contextual menu. From the Text panel of properties palette change value of Obliquing to 30.
Repeat the process for text on cube facing dimension B but in this case change obliquing value to
-30. The final drawing with isometric dimension and text will look like the image shown below.
Do you have any questions related to isometric text and dimensions? Let me know in comments
below.