Professional Documents
Culture Documents
3 No. Req'd 2 unit/tank (Vendor to Verify) No. of Tank 4 (four) Model V.R
Material CS
Vessel Design Conditions
13 Jacket Yes No M
14 Coil Yes No
15 Baffle Yes No
27 Purpose of Agitation Blending Reaction Dissolution Variations in the conditions of the liquid agitated
Heat
Operating Conditions
32 Racing Yes No
33 Liquid Level Variations Yes No Quantity of liquid (KL) Max. Nor. Min. -
34 Blending Time (Note 2) Continuous Intermittent (24 hr/batch) Processing frequency per day - Batch/day
41 Pitch Angle of Blade Other ( ) Mounting Flange Manhole 20-24" API 650(Vendor to Recommend)
53 Remarks
55 2. Mixers shall be desi gned for both continuous and intermittent operation.
56 3. All equipments shall be furnished with adequately sized lifting lugs or lifting eye bolts for loading, unloading and erection
57 4. Mixer design shall permit removal of the mixer from the tank through the mixer manhole without having to dismantle the impeller from the mixer shaft.
58 5. Mechanical seal assemblies shall be of cartridge design and shall be removable under full tank conditions and without removing the mixer drive unit.
Other
59 6. Vendor to propose supporting method for the mixer in order to prevent high stress concentrations at the tank shell plate.
60 7. Considering operation flexibility, tank mixer should also capable to mix these fluid :
66
67